• Offer Profile
  • microsonic是一个全球认可的专家ultrasonic sensors for applications in industrial automation technology. Examples are ultrasonic dual sheet control systems that work with no calibration at all, label sensors that use special teach-in methods to be able to detect even critical labels and splices at high transport speeds, and ultrasonic proximity switches with switching frequencies of up to 250 Hz.
Product Portfolio

  • Distance sensors

      • Cylindrical

          • mic+ ultrasonic sensors

          • mic+ sensors are available in four device designs with five different detection ranges

            Highlights
            • Digital display with direct measured value output in mm/cm or %
            • Numeric configuration of the sensor using digital display permits complete advance configuration of the sensor
            • Automatic synchronisation and multiplex operation for simultaneous operation of up to ten Sensors in close quarters

            Basics
            • 1 or 2 switching outputs in pnp or npn variants
            • Analogue output 4–20 mA and 0–10 V with automatic switching between current and voltage outputs
            • Analogue output plus 1 pnp switching output
            • 5测量ra检测范围nge of 30 mm to 8 m
            • microsonic Teach-in by using button T1 and T2
            • 0.025 mm to 2.4 mm resolution
            • Temperature compensation
            • 9–30 V operating voltage
            • LinkControl for configuration of sensors from a PC

          • mic ultrasonic sensors

          • These completely metal mic sensors are available in two device designs with five different detection ranges.

            Highlights
            • M30 housing and M12 circular connector in metal design for harsh usage conditions
            • Automatic synchronisation for simultaneous operation of up to ten sensors in close quarters

            Basics
            • 1 switching output in pnp variant
            • Analogue output 4–20 mA and 0–10 V with automatic switching between current and voltage outputs
            • 5测量ra检测范围nge of 30 mm to 8 m
            • microsonic Teach-in on pin 5
            • 0.18 mm to 2.4 mm resolution
            • Temperature compensation
            • 9–30 V operating voltage
            • LinkControl for configuration of sensors from a PC

          • wms ultrasonic sensors

          • The wms sensors are designed for use in microprocessor controllers with signal evaluation performed by the customer.

            Highlights
            • Trigger input for control of the ultrasonic transmitter
            • Echo output for customer-provided evaluation in the controller

            Basics
            • 1 echo output with a load up to 10 mA
            • 5测量ra检测范围nge of 30 mm to 8 m
            • 0.36 mm resolution
            • 9–30 V operating voltage

          • pico+ ultrasonic sensors

          • pico+ the "little guy" that can do it all: 4 ranges, 3 output signals, 2 housing variants and 1 IO-Link interface.

            Highlights
            • Variant with 90° angled head
            • IO-Link interface for support of the new industry standard
            • Automatic synchronisation and multiplex operation for simultaneous operation of up to ten sensors in close quarters

            Basics
            • 1推挽式开关输出,pnp型或npn型基础
            • Analogue output 4–20 mA or 0–10 V
            • 4 detection ranges with a measurement range of 20 mm to 1.3 m
            • microsonic Teach-in on pin 5
            • 0.069 mm to 0.1 mm resolution
            • Temperature compensation
            • 10–30 V operating voltage
            • LinkControl for configuration of sensors from a PC

          • nano ultrasonic sensors

          • nano – what‘s in a name? At just 55 mm long, including plug, the nano is the shortest M12 ultrasonic sensor on the market.

            Highlights
            • Ultrasonic sensor in the M12 threaded sleeve
            • The total length including plug is only 55 mm
            • Improved temperature compensation adjustment to working conditions within 45 seconds

            Basics
            • 1 switching output in pnp or npn variant
            • Analogue output 4–20 mA or 0–10 V
            • 2 detection ranges with a measurement range of 20 mm to 350 mm
            • microsonic Teach-in on pin 2
            • 0.069 mm resolution
            • Operating voltage 10–30 V for use with various voltage networks

        • Cuboidal

            • lcs+ ultrasonic sensors

            • The new lcs+ ultrasonic sensors come in a very compact square-shaped housing - with analogue or switching output + IO-Link.

              Highlights
              • Very compact housing dimensions only 62.2 mm x 62.2 mm x 36.7 mm
              • IO-Link interface for support of the new industry standard
              • Synchronisation and multiplex mode for simultaneous operation of up to ten sensors in close quarters
              • 8 m maximum detection range
              • UL Listed to Canadian and US safety standards

              Basics
              • 1 Push-Pull switching output, or 2 pnp switching outputs
              • Analogue output 4–20 mA and 0–10 V with automatic switching between current and voltage outputs
              • microsonic Teach-in by using button T1 and T2
              • 0.18 mm to 2.4 mm resolution
              • Temperature compensation
              • 9–30 V operating voltage
              • LinkControl for configuration of sensors from a PC

            • lcs ultrasonic sensors

            • Ultrasonic sensors in the lcs series in cuboidal housing with lateral sound exit are available in three device variants with three different detection ranges.

              Highlights
              • Up to 3 pnp switching outputs
              • Automatic synchronisation for simultaneous operation of up to ten sensors in close quarters

              Basics
              • 2 or 3 switching outputs in pnp variant
              • Analogue output 4–20 mA and 0–10 V with automatic switching between current and voltage outputs
              • 3 detection ranges with a measurement range of 30 mm to 2 m
              • microsonic Teach-in on pin 5
              • 0.18 mm resolution
              • Temperature compensation
              • 9–30 V operating voltage
              • LinkControl for configuration of sensors from a PC

            • sks ultrasonic sensors

            • Our "smallest sensor": The sks sensor in cuboidal housing.

              Highlights
              • Very small housing dimensions with two M3 threaded sleeves
              • Installation-compatible with many optical sensors a true alternative for critical applications
              • Improved temperature compensation adjustment to working conditions within 45 seconds

              Basics
              • 1 switching output in pnp or npn variant
              • Analogue output 4-20 mA or 0-10 V
              • microsonic Teach-in using a button
              • 0.1 mm resolution
              • 20–30 V operating voltage

            • ucs ultrasonic sensors

            • The ucs sensors in a sturdy metal housing are mechanically compatible with the industrial standard of opto sensors.

              Highlights
              • Robust metal housing for harsh usage conditions
              • Dovetail design for fast installation
              • Mechanically compatible with the industry standard a true alternative to the optical sensor
              • Automatic synchronisation for simultaneous operation of up to ten sensors in close quarters

              Basics
              • 2 anti-valent switching outputs in pnp or npn variant
              • microsonic Teach-in using a button
              • 0.1 mm resolution
              • Temperature compensation
              • 10–30 V operating voltage
              • LinkControl for configuration of sensors from a PC

            • zwsultrasonic sensors

            • The zws sensors are among the smallest ultrasonic sensors available on the market in cuboidal housings with Teach-in buttons.

              Highlights
              • Ultrasonic sensor in miniature housing
              • Installation-compatible with many optical sensors a true alternative for critical applications
              • Up to 250 Hz switching frequency for fast sampling
              • Optionally with SoundPipe waveguide attachment
              • Synchronisation input
              • Improved temperature compensation adjustment to working conditions within 45 seconds

              Basics
              • 1 switching output in pnp or npn variant
              • Analogue output 4–20 mA or 0–10 V
              • 5测量ra检测范围nge of 20 mm to 1 m
              • microsonic Teach-in by using a button
              • 0.08 mm resolution
              • 20–30 V operating voltage

          • Chemical-resistant

              • pico+TF ultrasonic filling-level sensor

              • The pico+TF sensors are ideal for the non-contact fill level measurement of chemically aggressive liquids or granules.

                Highlights
                • Teflon membrane for protection against aggressive media
                • M22 sleeve in PVDF
                • IO-Link interface for support of new industry standard
                • Automatic synchronisation and multiplex operation for simultaneous operation of up to ten sensors in close quarters

                Basics
                • 1 Push-Pull switching output pnp or npn basis
                • Analogue output 4–20 mA or 0–10 V
                • 4 detection ranges with a measurement range of 25 mm to 1,300 mm
                • microsonic Teach-in on pin 5
                • 0.069 resolution
                • Temperature compensation
                • 10–30 V operating voltage
                • LinkControl for configuration of sensors from a PC

              • crm+ ultrasonic sensors

              • Wear-resistant PEEK film protects the sensor membrane from chemicals, contamination and caking.

                Highlights
                • Ultrasonic transducer protected by PEEK film for simple cleaning and high resistance to wear
                • Stainless-steel housing
                • Digital display with direct measured value output in mm/cm or %
                • Numeric configuration of the sensor using digital display permits the complete advance configuration of the sensor
                • Automatic synchronisation and multiplex operation for simultaneous operation of up to ten sensors in close quarters

                Basics
                • 1 or 2 switching outputs in pnp variant
                • Analogue output 4–20 mA and 0–10 V with automatic switching between current and voltage outputs
                • 5测量ra检测范围nge of 30 mm to 8 m
                • microsonic Teach-in using T1 or T2 buttons
                • 0.025 mm to 2.4 mm resolution
                • Temperature compensation
                • 9–30 V operating voltage
                • LinkControl for configuration of sensors from a PC

              • hps+ ultrasonic sensors

              • hps+ in safety gear - When you need chemically resistant, pressure-resistant sensors.

                Highlights
                • Optionally used in normal pressure or overpressure
                • Teflon membrane for protection against aggressive media
                • Stainless-steel or optional PVDF housing for hps+340 for use in the food industry
                • Sealed against the housing with an O-ring made from FFKM for the highest possible chemical resistance
                • Digital display with direct measured value output in mm/cm or %
                • Numeric configuration of the sensor using digital display

                Basics
                • 2 switching outputs in pnp variant
                • Analogue output plus 1 pnp switching output
                • 4 detection ranges with a measurement range of 30 mm to 8 m
                • microsonic Teach-in using T1 or T2 buttons
                • 0.025 mm to 2.4 mm resolution
                • Temperature compensation
                • 9–30 V operating voltage
                • LinkControl for configuration of sensors from a PC

            • Hygienic Design

                  • pms ultrasonic sensors

                  • The design of the wash-down stainless steel housing with no crevices and dirt edges makes pms sensor perfectly suited to intensive cleaning and disinfection.

                    Highlights

                    • Innovative housing in Washdown Design, easy to clean, EHEDG certified
                    • Stainless-steel housings for use in the food and pharmaceutical industry
                    • PTFE membrane for protection against aggressive media
                    • Sealed against the housing with an O-ring made from FKM for the highest possible chemical resistance
                    • ECOLAB certified and FDA-compliant materials
                    • IO-Link interface for support of the new industry standard

                    Basics

                    • Push-Pull switching output pnp or npn basis
                    • Analogue output 4–20 mA or 0–10 V
                    • 4 detection ranges with a measurement range of 25 mm to 1,300 mm
                    • microsonic Teach-in on pin 5
                    • Temperature compensation
                    • 10–30 V operating voltage
                    • LinkControl for configuration of sensors from a PC

              • Special sensors

                  • Web edge sensors

                      • bks+ ultrasonic web edge sensors

                      • The bks+ edge sensor facilitates the contact-free web edge scanning of foils, paper and other soundimpermeable materials.

                        Highlights
                        • 2 housing designs with 30 and 60 mm fork width
                        • Available in 12 mm or 40 mm measurement range
                        • IO-Link interface for support of the new industry standard
                        • 0.01 mm to 0.02 mm resolution
                        • Very compact housing dimensions

                        Basics
                        • Contact-free detection of the path edge for regulation of the web path
                        • Analogue output 4–20 mA and 0–10 V switchable between current and voltage output
                        • 3 LEDs and 1 button on the top of the housing
                        • Parameterisable with LinkControl
                        • Robust metal housing

                      • bks ultrasonic edge sensors

                      • The bks edge sensor facilitates the contact-free web edge scanning of foils, paper and other soundimpermeable materials.

                        Highlights
                        • Compact design with only 30 mm fork width
                        • 0.025 mm resolution
                        • 0.1 mm relative accuracy
                        • 4 ms response time
                        • 8 mm working range

                        Basics
                        • Contact-free detection of the path edge
                        • Analogue output 4–20 mA and 0–10 V
                        • 3 LEDs and 1 button on the top of the housing
                        • Parameterisable with LinkControl
                        • Robust metal housing for harsh usage conditions

                    • Double sheet control

                        • dbk+4 ultrasonic double-sheet control

                        • The new ultrasonic double-sheet control dbk+4 combines multiple variants of its predecessor into a single unit, opening up entirely new possibilities for use.

                          Highlights
                          • 3 control inputs for trigger, Teach-in and external sensitivity settings for the material
                          • Teach-in option e.g. for probing wafers stuck together by a water film
                          • Variant with 90° angled head for individual installation situations
                          • Variant with external M18 receiving transducer
                          • Variants with very compact transmitters and receivers in the M12 threaded sleeve

                          Basics
                          • Reliable detection of single and double sheets
                          • No Teach-in needed (plug and play)
                          • Double sheet and missing sheet output
                          • Working distance between the transmitter and the receiver selectable from 20 to 60 mm
                          • Trigger option for applications in warehouse flow
                          • LinkControl for configuration of sensors from a PC

                        • dbk+5 ultrasonic double sheet control

                        • The dbk+5 extends the area of application of double sheet controls to heavy carton, corrugated cardboard, and plastic sheets.

                          Highlights
                          • High-performance ultrasonic double-sheet control especially for the probing of corrugated cardboard as well as plastic plates several mm thick
                          • 3 control inputs for Teach-in, trigger, and external sensitivity settings for the material
                          • Teach-in option e.g. for probing plates stuck together with an oil film
                          • Compact design in M18 x 1 threaded tube

                          Basics
                          • Reliable detection of single and double sheets
                          • No Teach-in needed (plug and play)
                          • Double-sheet and missing-sheet output
                          • Working distance between the transmitter and the receiver selectable from 30 to 70 mm
                          • Trigger option for applications in warehouse flow
                          • LinkControl for configuration of sensors from a PC

                      • Label and splice sensors

                          • esf-1 ultrasonic label and splice sensors

                          • The esf-1 fork sensor can detect labels reliably even at high label speeds.

                            Highlights
                            • 3 Teach-in methods for the detection of labels even outside the standard
                            • Response time < 300 µs: for use at high web speeds
                            • Housing in fork format with very compact dimensions
                            • Quick Teach

                            Basics
                            • Label and splice sensor as a fork sensor
                            • 2 switching outputs for label/ splice detection and web break monitoring
                            • 3 LEDs and 1 button on the top of the housing
                            • Teach-in optionally via button or pin 5
                            • LinkControl as optional assistance for installation and commissioning

                          • esp-4 label/splice sensor

                          • esp-4: Label and splice sensor compact in a single unit, optionally with M12 sensor heads.

                            Highlights
                            • 3 Teach-in methods to be able to configure the sensor individually for any task
                            • Response time < 300 µs for use at high web and label speeds
                            • Splice detection even for thick band materials
                            • Variants with very compact transmitters and receivers in the M12 threaded sleeve

                            Basics
                            • Label and splice sensor in a single unit
                            • 2 switching outputs for label/splice detection and web break monitoring
                            • LinkControl as optional assistance for installation and commissioning

                        • Accessories

                            • Programming utilities

                                • LCA-2

                                • The LCA-2 facilitates the comfortable setting of numerous microsonic sensor series (nice to have).

                                  Highlights
                                  • Three-digit digital display for the display of measured distance values in mm or cm
                                  • TeachBox with four-button operation for programming of the sensor without a PC
                                  • LinkCopy function for copying the sensor settings from one sensor to another without a PC
                                  • Uniform microsonic teach-in for all microsonic sensors to keep easy things easy

                                  Basics
                                  • Handy adapter for the programming of ultrasonic sensors
                                  • USB interface for connection to a PC
                                  • T plug to insert the adapter between the connector cable and the sensor
                                  • LinkControl software free download of the current version on the Internet
                                  • Backwards-compatible so sensors that have been in the field for a long time can still be programmed
                                  • Future-proof since the LinkControl adapter will also support future generations of sensors

                                • SyncBox

                                  • SyncBox1 for the external synchronisation of mic+

                                  • SyncBox2 for the external synchronisation of zws sensors

                              • Deflectors and mounting accessories

                                  • Mounting accessories

                                  • For fastening and adjusting of sensors

                                • Cables

                                      • Plug connectors and cables

                                      • For individual connection solutions