• Offer Profile
  • Mete Enerji Corp. Established in 2001 at Izmir Ataturk Industrial Zone, is one of the leading manufacturers of electrical connectors and electromechanical equipment for varied industrial applications. Successfully combining more than 25 years of experience with quality oriented mentality; Mete Enerji staff manufactures products to meet their customers’ top quality expectations.
Product Portfolio
  • 电连接器和electromechanical equipment, thermoplastic power enclosure

      • Mete CON

      • All the seals are made of NBR material and resistant to wear and chemical oils and have IP65 degree of protection. The seals at bottom suit well to the housings with their perfect design during the assembly.

        There are two types of locking mechanism.
        1. Min. wear occurs due to the rolling disk on the locking mechanism. Thus the locking pressure decreases at min. level. The spring which is used inside the locking mechanism is made of stainless steel and resistant to environmental conditions. The body of the locking mechanism is made of durable engineering plastics, means no corrosion problem.
        2. Metal locker is made of galvanized sheet metal with zinc plated (resistant against corrosion) All the mounting screws on the inserts are captive. All contacts have wire protection.
        • Mete CEE

          • Mete BOX

          • GENERAL CHARACTERÄ°STICS OF THE THERMOPLASTIC ENCLOSURES
            • Durable against all weather conditions (- 40 °C / +60 °C)
            • Protected against water penetration ( High IP degrees )
            • Durable against heat and shocks
            • Stainless steel (Inox) & Captive screws
            • Long life polyurethane seals used on covers
            • Endures 650 °C glow wire test (V2) (HFR).
            • Wide area inside the enclosure
            • Flexible, durable raw material (ABS).
            • Possibility of using cable ties.
            • Durable fixing devices which increase IP degree
            • Big interior space makes connections easier.
            • Cable Glands
            • IP degree 55
            • Fits tight through cable entries
            • Flexible raw material causes high ability of surrounding the cable
            • Long life raw material resistant to different weather conditions

            FORMED IN PLACE FOAM GASKETING
            All of our enclosure range can reach up to IP67 ingress protection degree due to the newest technique for gasketting which is known as Formed in Place Foam Gasketing. The PU material is poured in to the groove and goes in to chemical reaction with air and fills the groove completely with no joints.

            Ingress protection degree up to IP67 can be reached in every single item with the same quality level.
            • Weather Proof Products

                • 405001-05 One Gang
                  One Way Switch

                • 405004-05 Illuminated One Gang
                  One Way Control Switch

                • 405005-05 Schuko Socket
                  Outlet With Lid

                • 405014-05 Telephone Outlet

                • 405026-05 Two Gang
                  One Way Switch+Schuko Socket Outlet With Lid

                • 405040-05 Schuko Socket Outlet With Lid+Schuko Socket Outlet With Lid

              • Rubber Series

              • TECHNICAL SPECIFICATIONS

                INSERTS

                NUMBER OF CONTACTS

                2p+E

                MATERIAL

                PA6

                ELECTRICAL DATA ACC. TO TS IEC 60884 / EN 60884

                OPERATING CURRENT

                16 A.

                25 A.

                32 A.

                OPERATING CURRENT

                250 / 415 V.

                OPERATING VOLTAGE

                2 kV.

                INSULATION RESISTANCE

                ≥ 510Ω

                FLAMMABILITY acc. to UL 94

                V0

                MECHANICAL WORKING LIFE

                ≥ 10000

                CONTACTS

                MATERIAL

                Copper Alloy

                SURFACE

                Nickel Plated

                CONTACT RESISTANCE

                ≤ 1 m Ω

                CONNECTION

                HOUSINGS

                Screw Connection

                MATERIAL

                TPE

                DEGREE OF PROTECTION ACC. TO DIN EN 60529 FOR COUPLED CONNECTOR

                IP 44