Navigation :EXPO21XX>PROCESS INDUSTRY 21XX>H37：加工气体>BiogaskontorKöberle
BIOGASKONTOR Köberle
Videos
Loading the player ...
  • 提供个人资料
  • BIOGASKONTOR Köberle GmbH is a pioneer in the development of technology for safe biogas plants. Graduate Engineer Erwin Köberle has decades of experience in the development, construction and operation of biogas plants for different requirements. Based on this experience BIOGASKONTOR has developed components for the safe and reliable operation of biogas plants. In process technology and safety BIOGASKONTOR sets international standards. More than 13,000 BIOGASKONTOR bulls eyes are currently in use worldwide.
Product Portfolio

  • 公牛的眼睛

      • 标准设备

      • 一目了然的一切都与公牛眼睛RD 300/RD 400
        Is the fermentation process working properly? Are there signs of scum on the surface? What is happening at the mixer? The bulls eye RD 300/RD 400 allows visual inspection of the fermentation process in the biogas plant fermenter. Optionally biogas can be taken from the rinsing line.

        技术数据
        1.集成安装和密封系统
        2.Universally deployable directly in the core drilled hole or spacing tube
        3.带有最大擦拭区域的雨刮器
        4.Water nozzle with stainless 316, tube non-return valve and ball valve
        5。Thermal resistance up to 80°C
        6。Glass resistance up to 1 bar
        7。压力阻力为30 MBAR，具有标准固定，特殊固定最多可达100 mbar

        实用提示二重奏 - 帕诺拉姆RD 300/RD 400
        We always recommend installing two bulls eyes. The illumination is provided by the smaller bulls eye. The second bulls eye allows a glare-free view of the illuminated interior. The RD 400 with the large viewing angle is particularly suitable for large containers with a variable filling level. Several agitators can be monitored with one panorama unit.

        • Bulls Eye Rd 300/ RD 400

            • Bulls Eye Rd 300

            • RD 300公牛的一部分
              1.Integrated ring seal of rubber and stainless steel 316 for direct, pressure
              resistant installation in core hole or spacing tube of 300 mm Ø
              2.特种玻璃250毫米Ø15毫米
              3.Wiper, wiper scope 230 mm Ø
              4.由不锈钢制成的喷嘴316
              5。3 stainless steel mounting brackets

            • 公牛的眼睛RD 400

            • 1.Integrated ring seal of rubber and stainless steel 316 for direct, pressure
              在400mmø的核心孔或间距管中的抗性安装
              2.特殊玻璃350毫米，15毫米
              3.Wiper, wiper scope 330 mm Ø
              4.由不锈钢制成的喷嘴316
              5。4 stainless steel mounting brackets

            • Special designs: Bulls eye in immersion pipe

            • 公牛的眼睛on stainless steel plate

              Plate can be manufactured in many sizes with fixing holes to customer specification.

              公牛的眼睛for existing on-site plate

              RD 300和RD 400作为套件可用，并带有CAD数据，用于切割现场板。

              公牛眼膜材料

              RD 300 and RD 400 available as a kit for installation into a membrane roof.

          • Accessories

              • 检查灯

              • ATEX II 2 GEx (zone 1+2)

                230 Volt, 50 W, aluminium casing with push button and timer.

                Type: LUMI USL07 - EX, bulb halogen 12 V, including parts for fixed mounting at the bull's eye

              • Gimbal lamp holder

              • Gimbal lamp holder for 2-axis movement, bolted directly to the bulls eye, for optimum handling of the EX-light for RD 300 / RD 400 bulls eyes

              • Rosette

              • Stainless steel 304 rosette for a clean finish to the tank cladding. Length 20 cm, collar 5 cm . Attachment and eventual shortening on site.

              • Sun protection cover

              • 储罐墙上的防晒盖作为暗室，以更好地通过公牛眼观看，58 x 58 x 114厘米，2毫米铝板，包括在现场固定种沟附件。

            • Over-/ under-pressure valve ÜU TT

                  • Over-/ under-pressure valve ÜU TT

                  • The valve features an immersion cups and two sealing fluid chambers, one for over pressure and one for under pressure. The response pressures for over-pressure and under-pressure can be set independently of each other. The response pressures are determined via the weight of the respective immersion cup.
                    密封液的最大填充水平取决于内部腔室立管的高度。从冷凝水或雨水中积累的其他水自动在外面流出。
                    For the gas, escaping at over pressure a flange is provided, to which a discharge pipe (optional) is connected.
                    Upon actuation of the underpressure valve, external air flows through air intake opening into the gas line.
                    The filling level of the overpressure cup (above) can be controlled via an immersion pipe. Filling level of the underpressure cup (below) can be controlled at the inspection glass.
                    在上部气体入口处，将找到一个½“的连接，例如清洁（冲洗），充值，进行采样或连接压力表。

                    Response to over-pressure
                    With increasing pressure on the gas side, the pressure cup is raised (above) and after emersion from the sealing liquid, the gas can flow through and escape through the blow-off pipe. The vacuum cup remains closed.

                    Response to under-pressure
                    相反，在压力不足时，抬高真空杯（下方），并在从屏障流体中提升后，空气可以流入控制阀并进入气体线。压力杯保持关闭。

                    Heat insulation
                    The over-,under-pressure valve is thermally insulated with a rubber flex insulation. The insulation is resistant to moisture, closed and flame retardant. The thermal insulation is covered with a protective cover made of stainless steel sheet.

                    Dimensions
                    We offer three different sizes for the over-, under-pressure OP TT. These depend on the respective flow amounts:
                    • 在3 mbar压力响应下，气体的气体量高达150 m3/h，量150
                    • ÜU TT 200 for gas amounts up to 220 m3/h at 3 mbar pressure response
                    • üutt 273和Op tt 300的气体在3 mbar压力响应下高达600 m3/h

              • Accessories

                    • Over-pressure outflow pipe with flange

                    • V2A DN 150 / DN 200 / DN 250 / DN 300, 2 m long. If required other lengths can be supplied.

                    • Warning signs Ex INTERNATIONAL on 304-plates

                    • Complete with clamp pipes DN 150 / DN 200 / DN 250 / DN 300

                    • PE-HD中的过度压力和不压力的连接T恤

                    • 聚乙烯管道配有316个钢制盲盘，垫圈和螺钉。Din法兰PN10

                    • 不锈钢316中的超压阀150和200的连接T恤，

                    • V4A中的Tee连接，不受压力不足TT 150 /200，配有V4A虚拟晶圆，VA垫圈和螺钉。V4A DIN法兰DN 150 / DN 200用于直接连接阀，完全在VA中生产。

                    • Gas valve, butterfly

                    • EBRO不锈钢 / NBR密封橡胶用于气体。

                    • Gooseneck

                    • for over-pressure and under-pressure ÜU TT 150/TT 200/TT 273, consisting of KG 2000-fit socket fittings to plug onto the connection tee inside the tank to prevent entry of substrate . Complete with stainless steel clamp and stainless steel V4A profile including fasteners.

                    • Over-pressure sensor for ÜU TT150/200/273/300

                    • 传感器用于在超压打开时触发信号，由不锈钢适配器DN 150/DN 200/DN 200/DN 250/DN 300，安装支架和ATEX-Proximity传感器，带有2 m电缆和分离的放大器盒垫圈和螺钉。

                    • Heater for ÜU TT

                    • electric immersion heater TPAE, 200 W 220V 1Ph, Ex d II C T1 Ex II 2 GD, with BROAE 87 connection box Ex d II C IP67

                    • Warnschilder ExZone 1+2 auf V2A-Trägerplatten

                    • Komplett Mit Rohrschellen DN 150 / DN 200 / DN 250 / DN 300。

                    • Underpressure sensor for ÜU TT 150/200/273/300

                    • Sensor for trigging a signal at underpressure opening, consisting of stainless mounting bracket and ATEX-proximity sensor with 2 m cable and seperate amplifier box gasket and screws.

                • Over-/ under-pressure ÜU GD

                • The over-/ under-pressure valve ÜU GD serves to regulate the over-/ under-pressure in the fermenter of a biogas plant. The high and low pressure protection ÜU GD 150/200 has a stainless steel container with a barrier liquid and partition plate between the gas space and airspace.

                  In the inspection glass the operator can see at a glance
                  • 如果酒吧rier fluid is contaminated
                  • The current gas pressure
                  • The current valve setting for maximum pressure
                  • If gas is being expelled
                  可以为额外的压力板提供过度，压力不足的阀，当污染或过载时，重量负载且有响应性会导致实际的过度，不足的防护不足，并且气压超过了允许的值。压力板用作紧急压力释放装置，并将其设置为比üuGD阀更高的值。

                  工作原理：
                  在气体压力越来越大的情况下of the fermenter, the liquid level in the gas space of the over-, under-pressure valve is pressed down until the biogas can pass under the partition plate, and escapes to the air space through and the blow off pipe. Conversely in the case of under-pressure the liquid level on the air side can be pressed down to let air pass to the gas side of the fermenter. Thus, a possible unapproved under-pressure is reduced in the fermenter. The chamber parameters are designed so that at a chosen adjustment of the set pressure for the response pressure is always twice as large. The maximum level of the sealing liquid is set by an overflow pipe. Condensation or rain water entering can run off through the overflow pipe automatically. The height of the liquid level determines the set pressure at which the gas (over-pressure) or air is allowed to pass (in the case of under-pressure. In the case of increasing pressure through accummulated condensation or rain water excess sealing liquid is first pushed out through the overflow pipe.

                  Important note:
                  出口管必须始终保持打开状态，以使多余的冷凝水能够排出。由于虹吸管有冷冻和空吮吸的风险，因此只能使用一个开放通道而不是管子去除冷凝水！

                  Dimensions
                  我们为高压密封提供了两种不同的尺寸：
                  • ÜU seal 150 for amounts of gas up to 125 m3/h
                  • ÜU seal 200 for amounts of gas up to 200 m3/h

                  • Accessories

                        • ÜU GD 150 / ÜU GD 200

                        • /——/压力阀由不锈钢制成steel with cover 83 x 125 cm for gas dome and gas amounts up to 125 m³/h /200 m³ /h, 4 mm thick, 1 opening for over-pressure washer 40 x 40 cm with gasket, nuts and washers for blow-off including instruction manual.

                        • Blow off pipe with flange

                        • Stainless steel 304 DN 150 / DN 200 , 3 m long. Other lengths available if required.

                        • 警告标志“ EX区域1+2 double v2a板上的双倍”

                        • DN 150 / DN 200 complete.

                        • Warning signs "Ex international double on 304 plates with pipe clamps"

                        • DN 150 / DN 200 complete.

                        • Level sensor E+H Liquipoint T FTW31

                        • ATEX, WHG-certificat, with relay-switch FTW325 and 6/4" coupling i-a, conic seal, stainless 316

                        • Frame case gas dome

                        • 盖尺寸83 x 125 7height 65毫米，75 x 115厘米透明开口，不锈钢316，3毫米厚度，U形轮廓，带有双肋骨。

                        • 气层侧面法兰连接的额外价格

                        • DN 150-DIN / DN 200-PN10-DIN flange, stainless steel 316.

                        • Gas valve, butterfly

                        • DN 150 / DN 200 EBRO铸铁 /不锈钢 / NBR用于气体。

                        • C clamps

                        • 完整的不锈钢304螺纹孔M8，宽度为20毫米，握把28毫米。

                        • 泡沫橡胶垫圈

                        • 35 x 4 mm, Tapetec (1 roll = 10 m, Sahlberg).

                        • 过压板

                        • 48 x 48 cm stainless steel incl. press on frame, side seal groove and travel stop.

                        • 过压板with sight glass

                        • Stainless steel sheet 48 x 48 cm with integrated sight glass with wiper including press on frame, side seal and travel stop.

                        • Ballast weight for over-pressure plate

                        • Consisting of rubber washer package Ø 24 cm, pieces of 2 cm hole with tape for fastening.

                    • Air dosing unit

                        • 标准设备

                        • 沼气中的硫会在CHP燃烧过程中引起问题。脱硫是有用的。使用空气剂量单元，可以将少量的氧气喂入消化池。
                          沼气的脱硫化发生在消化基内部通过天然存在的细菌的活性，这些细菌的活性在其代谢和沉积元素硫中使用。他们需要少量的氧气。为此，气泵将少量空气吹入消化池的气体空间。空气量应约为产生气体量的4-6％。
                          The full effect of desulphurization is attained after several weeks, when a gas biofilm of hydrogen sulfide consuming bacteria is formed on the surfaces. This is facilitated by higher temperatures, wetting the surfaces with slurry/substrate by rough surfaces.

                          Part of the air dosing unit
                          1.                          空泵进行连续操作
                          2.Air flowmeter device
                          3.Throttling valve to regulate the volume
                          4.Connection with ball valve for condensate drainage and pipe rinsing
                          5。Air nozzle with non-return valve

                          Dimensions
                          • Type 20 for amounts of air up to 20 l/min
                          • Type 40 for air amounts up to 40 l/min
                          • Type 120 for air amounts up to 120 l/min
                          The indicated air quantities apply for pressure drop in the air pipes to the air nozzles of max 10 mbar and gas pressure maximum of 10 mbar in the digester.

                          • Accessories

                              • Air nozzle for desulphurization

                              • Consisting of stainless steel tube 12 x 1 mm, 0.5 m, VA elbow for 20 mm PE-HD tube, with stainless steel non-return valve, with flange for sealing.

                              • 密封胶筒

                              • 310 ml / Sabesto.

                              • Sikaflex TS Plus

                              • Sealing compound 600 ml bag for sealing.

                              • Air dosing unit for biogas desulphurization size 40

                              • up to about 1100 cubic meters of biogas per day, consisting of variable-flow display of up to 40 liters/min, linear air pump LA-45B, throttle valve, 2 ball valves with connection coupling for 20 mm PE high pressure air hose, 1 connection for condensate drain and for pipe rinsing. Incl. operating instructions in German. The vents must be equipped with a non-return valve!

                              • Air dosing unit for biogas desulphurization size 120

                              • up to 3000 cubic meters of biogas per day, consisting of: 3 variable flow displays up to 120 liters/min, linear air pump LA-120B, 130W, throttle valve, 3 ball valves with connector for 20 mm PE-HD air hose, 3 connectors for condensate drain and pipe flushing. Incl. Operating instructions in German. The vents must be equipped with a non-return valve!

                            • Unit for measuring

                                • Measuring unit

                                • 每个消化器都应配备去除基材样品的可能性。Biogaskontor测量单元提供了由不锈钢制成的双球阀的安全放电样品。可以使用温度和压力或容器中的填充水平的测量点。

                                  Variations: DN 150 with flanged pipe connections for building-shaft lining or stainless steel plate for direct screw to wall.

                                • Measuring unit fitting set with ball-valves

                                • Consisting of fittings for sample outlet and pressure measurement. Complete of stainless steel 316

                                • Measuring unit

                                • Comprising DN 150. flange bearing with stainless steel lid including probe conduit for temperature sensor and 2" pipe without anchor bolt for fixing without temperature and pressure can.

                                • Spacing bush

                                • DN 150 for 160 mm conical pipe rubber seal length 240 mm.

                                • Steel plate unit 3mm

                                • 35 x 35 cm with hole circle for dowelling to tank wall, stainless steel 304, including sensor conduit for temperature sensor, 2 "socket without sealing and fastening material.

                                • Pressure sensor for level measurement

                                • Pressure transmitter DMU 03 VM, without display, piezo-resistive stainless steel sensor, accuracy: 0.25% FSO. Stainless steel 316, 1.4571 / 1.4435, Process connection: 1/2 ", power supply: 12-36 V DC, output 4 - 20 mA, system: 2-wire, electrical connection: Plug DIN 43650-A, Measurement range: 0-1 bar (used for measurement unit).

                                • Temperature sensor PT 100

                                • GTF200 4 lead sensor, 4m cable, for GREISINGER GIR 2002 and GIA 2000.

                                • Temperature controller including temperature display

                                • GREISINGER GIR 2002 without 4-lead sensor PT 100, 230 V power supply, 2 relay outputs, serial interface bus operating mode..

                                • Thermometer GREISINGER GIA 2000

                                • 具有4个铅传感器PT 100，可扩展到100 m，最小 /最大存储，240 V，精度为0,1°C。

                              • Warning signs

                                  • Warning sign "explosive atmosphere" D-W021

                                  • Triangle with EX label, aluminium type, 165 mm x 190 mm

                                  • Warning sign "Observe noise protection"

                                  • ISO7010-M003Plastic sign, Ø 200 mm

                                  • Warning sign "Access prohibited" D-P006

                                  • Aluminium type, Ø 200 mm

                                  • Warning sign "No open flames" D-P002

                                  • Aluminium type, Ø 200 mm

                                  • Warning sign "Fire extinguisher"

                                  • PVC 200 mm x 200毫米

                                  • 警告标志“国际沼气，包括2个符号D-W021 + D-P002”

                                  • Aluminium type, Ø 300 mm x 400 mm

                                  • 警告标志“带管夹的V2A板上的国际双重双重”

                                  • DN 150 / DN 200 complete

                                  • Warning signs Ex INTERNATIONAL single on V2A-plates

                                  • 配备夹管DN 150 / DN 200 / DN 250 / DN 300。

                                  • Warning sign duct label "Biogas sticker"

                                  • 25 mm x 155 mm

                                  • Warning sign duct label "Substrate sticker"

                                  • 25 mm x 155 mm