Navigation :EXPO21XX>OFFICE FURNITURE 21XX>H05: Office Seating> Mey CHAIR SYSTEMS
  • Offer Profile
  • Each "Mey"-chair fits…
    and this stands for swivel chairs as well as for stools and for sit-stands. For them to be totally convincing they have to fulfil a whole string of conditions.
    We’re talking about ergonomical standards, quality demands, also always about the design and – of course – a good price-performance-ratio.

    We also produce custom-tailored seating, so that each, really each chair fits perfectly.
Product Portfolio

  • Chairs

  • A decision that is easy to take
    Mey CHAIR SYSTEMS GmbH has put together a highly versatile range of work chairs that will satisfy every wish with respect to functions and quality, since requirements vary, and there is no accounting for tastes. However, it is not only a question of a subjective assessment of taste, but also of ergonomics, of sitting comfortably, of preventing back problems, of the durability of materials and workmanship, and so on. In a word: if you choose the right work chair, you will do yourself and your colleagues a favour in the long run. At any rate, this has nothing to do with taking difficult decisions!

    • PROWORK PW1 series

    • Our work chairs of the PW1-series stand for seats and backs made of easy care PU-foam or beech-wood, gas-spring height adjustment and und stable plastic bases.

      On all models not only the seat-height can be adjusted individually by gas-spring but also the seat-angle can be adjusted infinitely.

    • WORKER W1 series

    • Our work chairs of the W1-series stand for seats and backs made of easy care PU-foam, imitation leather or fabric, gas-spring height adjustment and stable steel bases.
      On all models not only the seat-height can be adjusted individually by gas-spring but also the seat-angle can be adjusted infinitely.

      This series is equipped with either standard braked castors or glides and is also available with a high gas-spring for higher work places. In this case the models are equipped with foot-rings or footrests.

    • WORKER W2 series

    • 我们的工作椅子W2-series站的for seats and backs made of PU-foam,imitation leather, fabric or beech-wood, mechanical height-adjustment by key-slot and stable steel bases.

      On all models not only the seat-height can be adjusted individually by gas-spring but also the seat-angle can be adjusted infinitely.

      This series is equipped with either standard braked castors or glides and is also available with a high gas-spring for higher work places. In this case the models are equipped with foot-rings or footrests.

    • WORKER W5 series

    • Our work chairs of the W5-series stand for seats and backs made of thick PU-foam, gas-spring height adjustment and stable plastic bases.

      On all models not only the seat-height can be adjusted individually by gas-spring but also the seat-angle can be adjusted infinitely.

      This series is equipped with either standard braked castors or glides and is also available with a high gas-spring for higher work places. In this case the models are equipped with foot-rings or footrests.

    • WORKER W8 series

    • Our work chairs of the W8-series stand for seats and backs made of PU-foam, gas-spring height adjustment and stable plastic bases.

      On all models not only the seat-height can be adjusted individually by gas-spring but also the back can be adjusted infinitely in height and depth.

      This series is equipped with either standard braked castors or glides and is also available with a high gas-spring for higher work places. In this case the models are equipped with foot-rings or footrests.

    • WORKER W9 series

    • 我们的工作椅子W9-series站的大海洋ts and high backs made of PU-foam, gas-spring height adjustment and robust, nice steel bases.

      On all models not only the seat-height can be adjusted individually by gas-spring but also the seat-angle can be adjusted infinitely.

      This series is equipped with either standard braked castors or glides and is also available with a high gas-spring for higher work places. In this case the models are equipped with foot-rings or footrests. Several models are also available in ESD-version.

    • WORKER W13 series

    • Our work chairs of the W13-series stand for especially ergonomic seats and backs made of PU-foam, gas-spring height-adjustment and robust, nice steel bases. On all models not only the seat-height can be adjusted individually by gas-spring but also the seat-and back angle can be adjusted infinitely.

      此外,这把椅子配有同步-mechanism with ratio 1:2.5 and a backrest-angle-adjustment with permanent contact function.

      This series is equipped with either standard braked castors or glides and is also available with a high gas-spring for higher work places. In this case the models are equipped with foot-rings or footrests.

      All models are also available in XXL-version – designed for a permanent use up to 150 kg - without abstaining from the comfort you are used with Mey-products.

    • WORKER W15 series

    • Our work chairs of the W15-series stand for especially big and comfortable seats and backs made of PU-foam, gas-spring height-adjustment and robust, nice steel bases.

      On all models not only the seat-height can be adjusted individually by gas-spring but also the seat-and back angle can be adjusted infinitely.

      This series is equipped with either standard braked castors or glides and is also available with a high gas-spring for higher work places. In this case the models are equipped with foot-rings or footrests.

      All models are also available in XXL-version – designed for a permanent use up to 150 kg - without abstaining from the comfort you are used with Mey-products.

    • WORKER W19-series

    • Our work chairs of the W19-series stand for especially wide seats and backs made of PU-foam, gas-spring height-adjustment and robust, nice steel bases.

      On all models not only the seat-height can be adjusted individually by gas-spring but also the seat-and back angle can be adjusted infinitely.

      This series is equipped with either standard braked castors or glides and is also available with a high gas-spring for higher work places. In this case the models are equipped with foot-rings or footrests.

      All W19-models are also available in XXL-version – designed for a permanent use up to 150 kg - without abstaining from the comfort you are used with Mey-products.

    • WORKER WE-series

    • Our work chairs of the WE-series stand for seats and backs made of PU-foam, imitation leather, fabric or beech-wood, gas-spring height-adjustment and stable steel bases.

      On all models the seat-height can be adjusted individually by gas-spring and the back-rest can be adjusted mechanically in height and depth.

      This series is equipped with either standard braked castors or glides and is also available with a high gas-spring for higher work places. In this case the models are equipped with foot-rings or footrests. Several models are also available in ESD-version.

    • WORKER WF series

    • Our work chairs of the WF-series stand for big seats and high backs made of PU-foam, imitation leather or fabric, gas-spring height-adjustment and nice aluminium bases.

      On all models not only the seat-height can be adjusted individually by gas-spring but also the seat-angle can be adjusted infinitely.

      This series is equipped with either standard braked castors or glides and is also available with a high gas-spring for higher work places. In this case the models are equipped with foot-rings or footrests.

      Several models are also available in ESD-version and/or with a special lordosis support in the back.

    • WORKER FUTURA WF5 series:

    • Our work chairs of the WF5-series stand for seats and backs made of PU-foam or beech-wood, gas-spring height-adjustment and stable plastic bases.

      On all models not only the seat-height can be adjusted individually by gas-spring but also the seat-angle can be adjusted infinitely.

      This series is equipped with either standard braked castors or glides and is also available with a high gas-spring for higher work places. In this case the models are equipped with foot-rings or footrests.

    • WORKER WK-series

    • Our work chairs of the WK-series stand for comfortable seats and backs made of imitation leather, gas-spring height-adjustment and nice chromium-plated steel bases.

      On all models not only the seat-height can be adjusted individually by gas-spring but also the seat-angle can be adjusted infinitely.

      This series is equipped with either standard braked castors or glides and is also available with a high gas-spring for higher work places. In this case the models are equipped with foot-rings or footrests.

    • WORKER WS series

    • Our work chairs of the WS-series stand for seats and backs made of PU-foam, imitation leather, fabric or beech-wood, mechanical height-adjustment by key-slot and stable steel bases.

      On all models the seat-height can be adjusted individually by key-slot and the back-rest can be adjusted mechanically in height and depth..

      This series is equipped with either standard braked castors or glides and is also available with a high gas-spring for higher work places. In this case the models are equipped with foot-rings or footrests.

  • Sit-stands

  • Everybody who works „standing“ needs a comfortable support which protects him against premature fatigue.
    The ergonomical sit-stands from Mey CHAIR SYSTEMS relieve joints and muscles and at the same time help preventing long-lasting back pains.
    You can remain the “standing” posture while allowing your spinal column relief.

    • ASSISTANT FUTURA AF0

    • Our sit-stands of the AF0-series stand for easy-care seats made of PU-foam and for robust bases made of steel. This series is equipped with glides and is also available in ESD-version.

      On all models not only the seat-height can be adjusted individually by gas-lift but also the seat angle can be adjusted infinitely.

    • ASSISTENT FUTURA AF1

    • Our sit-stands of the AF1-series can be folded-up space-saving in case on no need. This series is equipped with glides only.

    • ASSISTENT FUTURA AF2

    • Our sit-stands of the AF2-series stand for easy-care seats made of PU-foam and for a good-looking aluminium base. This series is equipped with glides only and also available in stainless steel version for special places.

    • Assistent Futura AF3-series

    • Our sit-stands of the AF3-series stand for easy-care seats made of PU-foam, fabric or imitation leather and for a stable plastic base base.

      On all models not only the seat-height can be adjusted individually by gas-lift but also the seat angle can be adjusted infinitely.

      This series is equipped with either castors or glides and is also available with a high gaslift for higher work places. In this case the models are equipped with foot-rings.

    • ASSISTENT FUTURA AF4 series

    • Our sit-stands of the AF4-series stand for comfortable saddle seats with or without backrests and a stable plastic base.. They are available in either PU-foam, fabric or imitation leather.

      On all models not only the seat-height can be adjusted individually by gas-lift but also the seat angle can be adjusted infinitely.

      This series is equipped with either standard castors, special fixable castors or glides and is also available with a high gaslift for higher work places. In this case the models are equipped with foot-rings or footrests.

      For special work places we offer this model also with a foot-controlled gas-lift-height-adjustment!

    • ASSISTENT FUTURA AF5 series

    • Our sit-stands of the AF5-series stand for a variety of different seats made of PU-foam or imitation leather and for a specially shaped steel-base.

      On almost all models (besides AF5-H-PU5) not only the seat-height can be adjusted individually by gas-lift but also the seat angle can be adjusted infinitely.
      This series is equipped with glides only but has 2 small transport castors at the rear end that allow easy movement from one place to another.

    • ASSISTENT FUTURA AF6 series

    • On almost all models not only the seat-height can be adjusted infinitely but also the seat angle.

      This series is equipped with glides only but has 2 small transport castors at the rear end that allow easy movement from one place to another.

    • ASSISTENT FUTURA AF9 series

    • Our sit-stands of the AF9-series stand for easy-clean seats made of PU-foam and for a robust frame made of round steel tube.

      On all models not only the seat-height can be adjusted infinitely but also the seat angle.
      This series is equipped with glides only but has 2 small transport castors at the rear end that allow easy movement from one place to another. It is also available in ESD-version.

    • Assistent Futura AF18-series

    • Our sit-stands of the AF18-series stand for comfortable saddle seats made of imitation leather and for nice chromium-plated steel bases.

      On all models the seat-height can be adjusted infinitely by gas-spring. This series is equipped with special fixable castors.

    • ASSISTENT FUTURA AF-S(R) series

    • Our sit-stands of the AF-S-series stand for a variety of seats made of PU-foam, fabric or imitation leather and for a stable, fold-away frame made of steel.

      On all models the seat-height can be adjusted individually. This series is equipped with glides only and is also available with a fold-away footrest.
      For special work places we offer this model also in stainless steel version.

  • Stools

  • This certainly has something to do with jumping quickly off a stool!
    The original German phrase can be traced back to an agile horse-rider, who can quickly jump out of the saddle to conduct his business – and just as quickly, he is back on his horse and away. Stools by Mey CHAIR SYSTEMS GmbH also contribute towards a certain form of nimbleness and agility in the routine of everyday work. This functional piece of furniture is needed everywhere, is in constant use, and also disappears again very quickly under the table.

    • ASSISTENT A1 series

    • Our stools of the A1-series stand for a great variety of seats made of PU-foam, imitation leather, fabric or beech-wood and for robust bases made of steel. The seat-height can be adjusted on all models individually by gas-lift.

      This series is equipped with either free castors fixable castors or glides and is also available with a high gaslift for higher work places. In this case the models are equipped with either foot-rests or foot-rings.

    • ASSISTENT A1S series

    • Our stools of the A1-series stand for a great variety of seats made of PU-foam, imitation leather, fabric or beech-wood and for stable bases made of plastic. The seat-height can be adjusted on all models individually by gas-lift and they are equipped with either castors or glides.

      For special workplaces you can have this model equipped with a robust steel-plate-base with castors and a tool-box made of plastic.

    • STOOL ASSISTENT A2

    • 我们的凳子A2-series代表一个伟大的变化ety of seats made of PU-foam, fabric or beech-wood and for robust bases made of steel.

      The seat-height can be adjusted on all models individually by a mechanical key-slot-mechanism. This series is equipped with either castors or glides.

    • ASSISTENT A3 series

    • Our stools of the A1-series stand for a robust, anatomically shaped seat made of PU-foam and for a stable base made of plastic.

      The seat-height can be adjusted on all models individually by gas-lift and the seat angle adjustment provides for a optimal sitting comfort.

      This series is equipped with either free castors fixable castors or glides and is also available with a high gaslift for higher work places. In this case the models are equipped with either foot-rests or foot-rings.

    • Assistent A8-series

    • Our stools of the A8-series stand for a great variety of seats made of PU-foam, imitation leather, fabric or beech-wood and for an innovative half-round steel base that offers more space for the feet - where necessary.
      The seat-height can be adjusted on all models individually by gas-lift. This series is solely equipped with glides.

    • Assistent A9-series

    • Our stools of the A9-series stand for easy to clean seats made of PU-foam and for robust and good-looking steel bases.

      The seat-height can be adjusted on all models individually by gas-lift. This series is equipped with either castors or glides and also available in ESD version.

    • Assistent A18-series

    • Our stools of the A18-series stand for seats covered with imitation leather in black or stylish bi-color.

      The seat-height can be adjusted on all models individually by gas-lift and for higher work places our footring FR 5 as well as the chromium plated base provide the necessary safety. In the normal work height the footring is directly fixed to the steel base. This series is solely equipped with glides.

  • Material Support Stands

  • This certainly has something to do with jumping quickly off a stool!
    The original German phrase can be traced back to an agile horse-rider, who can quickly jump out of the saddle to conduct his business – and just as quickly, he is back on his horse and away. Stools by Mey CHAIR SYSTEMS GmbH also contribute towards a certain form of nimbleness and agility in the routine of everyday work. This functional piece of furniture is needed everywhere, is in constant use, and also disappears again very quickly under the table.

    • Material stand MSRG

    • Our material stands of the MSRG-series
      stand for a high bearing load up to 150 kg.

      In order to find the optimal work-height the plate can be adjusted easily by gas-lift to the desired height.

      The individually adjustable angle of the plate provides for an easy and comfortable material withdrawal. This series is available in powder-coated blue or optionally white aluminium.

    • Material stand MSRK

    • Our material stands of the MSRK-series
      stand for a high bearing load up to 150 kg.

      In order to find the optimal work-height the plate can be adjusted manually by a key-slot-mechanism to the desired height. The individually adjustable angle of the plate provides for an easy and comfortable material withdrawal. This series is available in powder-coated blue or optionally white aluminium. For higher work places we even offer a model with a work-height of more than 100 cm.

  • Footrests

  • This certainly has something to do with jumping quickly off a stool!
    The original German phrase can be traced back to an agile horse-rider, who can quickly jump out of the saddle to conduct his business – and just as quickly, he is back on his horse and away. Stools by Mey CHAIR SYSTEMS GmbH also contribute towards a certain form of nimbleness and agility in the routine of everyday work. This functional piece of furniture is needed everywhere, is in constant use, and also disappears again very quickly under the table.

    • EFS 90

    • Our footrests of the EFS-series are equipped with a non-slippy foot-plate made of plastics. It is infinitely angle-adjustable but can also be fixed. The height can be adjusted comfortably by only pressing a knob with the heel of the foot.

    • EFS 92

    • Our footrests of the EFS-series are equipped with a non-slippy foot-plate made of plastics. It is infinitely angle-adjustable but can also be fixed. The height can be adjusted comfortably by only pressing a knob with the heel of the foot.

    • EFS 93

    • Our footrests of the EFS-series are equipped with a non-slippy foot-plate made of plastics. It is infinitely angle-adjustable but can also be fixed. The height can be adjusted comfortably by only pressing a knob with the heel of the foot.

  • Accesoires

  • This certainly has something to do with jumping quickly off a stool!
    The original German phrase can be traced back to an agile horse-rider, who can quickly jump out of the saddle to conduct his business – and just as quickly, he is back on his horse and away. Stools by Mey CHAIR SYSTEMS GmbH also contribute towards a certain form of nimbleness and agility in the routine of everyday work. This functional piece of furniture is needed everywhere, is in constant use, and also disappears again very quickly under the table.

    • tool-box black

    • made of plastic, black
      two-parts

    • footrest suitable for AF-SR

    • steel stand
      with footrest, made of PU

    • footrest suitable for AF-SR

    • steel stand
      with swivelling footrest, made of plastic

    • 16-3-37 9005 tin-holder

    • holder made of plastics, black / for all chair models

    • GH-100 beverage-holder

    • holder made of plastics, black
      arm made of metal, black

    • armrest mod.5

    • plastic, black
      chromium plated steel tube

    • GH-200 beverage-holder

    • holder made of plastics, black
      arm made of metal, black

    • Armrests Mod 3 complete

    • metal, powder coated, black

    • WH-100

    • made of plastic, black / suitable for all AF-SR-series

  • Foldable Models

  • This certainly has something to do with jumping quickly off a stool!
    The original German phrase can be traced back to an agile horse-rider, who can quickly jump out of the saddle to conduct his business – and just as quickly, he is back on his horse and away. Stools by Mey CHAIR SYSTEMS GmbH also contribute towards a certain form of nimbleness and agility in the routine of everyday work. This functional piece of furniture is needed everywhere, is in constant use, and also disappears again very quickly under the table.

    • AF4-KB-TRG-KL2/11-38

    • Sitstand little saddle seat

    • AF4R-KB-TRG-KL2/11-38 folding

    • imitation leather (KL) upholstered, black

    • AF5-KB-H-KL2

    • imitation leather (KL) upholstered, black

    • A8-KB-M-Comfort-KL4

    • mitation leather (KL4) upholstered, black

    • A9R-KB-TG-Comfort-KL3

    • imitation leather (KL3) upholstered, black