Mini产品系列具有Hainbuch的尝试和值得信赖的模块化系统。
Hainbuch的照片
有时小事情变成一个巨大的成功s. And that’s true for the mini chucks. But one thing they haven’t had until now was compatibility with the Hainbuch modular system. That’s no longer the case, and of course this includes both series of chucks: the round Spanntop and the hexagonal profile Toplus. Because of its reduced interference contour, to be able to use the modular system the Spanntop mini chuck comes with an adapter ring. The existing Mando Adapt mandrel and jaw module work perfectly with the new Spanntop mini. The Toplus version does not use an adapter ring, instead it has ring of attachment holes for fixing the jaw module, and next year it will get its own Mando Adapt series of adapters. And finally, as another piece of good news, Spanntop and Toplus minis both have full through-bore and are available in three standard lengths to suit all machines and drawtubes.
减少夹具装置干扰轮廓和质量更少
这两个因素在任何加工过程中都起着越来越重要的作用。工具可访问性和低能消耗是现代劳动力的关键标准，使他们为未来的挑战做好了准备。与过去相比，越来越多的零件具有较小的尺寸和更高的公差。因此，重点不再放在Chuck的大小上，而是在完整的过程上。得益于更大的工具可访问性，迷你Chucks可以使用较短，因此在主轴和台式上使用更稳定的工具。这再次对表面饰面产生了直接影响。质量不仅减少了38％以上，而且卡盘直径和总长度也大大减少了[第三或四分之一]。因此，»小«chucks»»大«差异。减少的干扰轮廓使选择合适的工具变得更加容易，这有助于减少空间的问题，尤其是在台式机器中。减少的质量也导致能源消耗较低，尤其是在质量产量中。 Because spindle acceleration and deceleration are more dynamic this shortens the cycle times, and all this contributes to lowering the cost per workpiece.
有关更多信息，请访问http://www.hainbuch.com。
 |
 |
 |
 |
 |
 |
||
 |
 |
 |
 |
 |
 |
 |
 |
