• SWL了to 16 t.
• Spans up to 39 m (SWL dependent).
• Optimised headroom via main girder connection variants.
• Highest possible hook position can be achieved.
• Intelligent functions—an option with the crane control ABUControl

离合器单梁起重机保证选择旅行imal material flow even in situations where space is at a premium as in production plants or warehouses where there is little room for crane systems. ABUS single girder travelling cranes are available with rolled section girders or with welded box girders. Thanks to different main girder connection versions, each type of crane can be optimised to minimise headroom and achieve the highest possible hook position.

• SWL了to 120 t.
• Spans up to 42 m (SWL dependent).
• Additional features can be easily added.
• Fast long and cross travel speeds possible.
• Intelligent functions—an option with the crane control ABUControl

ABUS double girder overhead travelling cranes achieve the maximum load capacity of up to 120 tonnes. They are available in various configurations and feature the versatility required for additional requirements. It is very easy to implement higher crane travel speeds, service platforms, trolleys with walkways, and auxiliary hoists for example.

• SWL了to 8 t.
• Spans up to 25m (SWL dependent).
• Crane track suspended from ceiling.
• Ideal for low buildings and complex building conditions.
• Optimal side approach dimensions maximise available building width.
• Intelligent functions—an option with the crane control ABUControl

ABUS underslung overhead travelling cranes offer solutions in applications where gantry tracks are fitted to ceilings rather than free-standing or building columns. Optimal side approach dimensions make it possible to use the maximum available building width.

• SWL了to 5 t.
• Span up to 12 m (depending on load capacity).
• On separate crane track on second level underneath other overhead travelling cranes.
• Ideal as workstation crane for several stations.
• Intelligent functions—an option with the crane control ABUControl

ABUS wall travelling cranes travel on their own crane tracks at building mid-level beneath high-level overhead travelling cranes. They are an ideal solution for covering several workstations with a single installation. ABUS wall travelling cranes type EWL reach spans of up to 12 m and have load capacities of up to 5 t.

• SWL了to 5 t.
• Span up to 12 m (depending on load capacity).
• On separate crane track on second level underneath other overhead travelling cranes.
• Ideal as workstation crane for several stations.
• Intelligent functions—an option with the crane control ABUControl

• Straightforward HB-System for linear point-to-point transport.
• Low headroom.
• Wide suspension spacing.
• Optional electric hoist travel.

The ABUS monorail specialises in lifting loads locally and in linear point-to-point transport. With the help of curved sections your hoist is able to travel through the building exactly as you need it to. Workstations could be linked in this way if required or the crane could be adapted to fit individual machinery locations.

• Better load distribution on the suspensions.
• Wide suspension spacing.
• Particularly favourable lifting height with chain hoist suspended between rails.
• Optional electric hoist travel.
• Optional mobile control.

Two crane tracks are suspended in parallel for the ABUS double rail system with the hoist suspended between them. The loads are distributed more evenly meaning less loading for the building structure. Wider suspension spacing is possible.

• Area-coverage materials handling.
• Very light crane; ideal for use in lightweight buildings.
• Easily moved manually.
• Short end approach dimensions.
• Wide suspension spacing.

The ABUS single girder crane EHB is the most straightforward HB system solution for area-coverage materials handling within buildings. The EHB is a very light crane due to the simple construction of two crane tracks and one crane girder which makes it easy to move the EHB manually. This crane is ideal to be installed in lightweight buildings with low load-bearing ability.

• Optimal use of available room height thanks to stooled up crane.
• Easily moved manually.
• Extremely low profile.
• Short end approach dimensions.
• Wide suspension spacing.
• Optional electric hoist travel.
• Optional mobile control.

The EHB-X is your answer should the building height of the EHB prove to be insufficient. The crane girder of this single girder crane does not run underneath the crane tracks but between them. The total height of the crane is equal to the height of a single profile. A vastly improved lifting height is achieved. This can be very useful if high machinery in the transport area needs to be negotiated.

• High load capacity.
• Particularly favourable lifting height thanks to the chain hoist being placed between the crane girders.
• Optional electric hoist travel.
• Optional mobile control.

The ABUS double girder crane ZHB is our answer for heavy loads combined with area-coverage transport. The ZHB is also characterised by long crane spans. The ABUS chain hoist is also suspended between the crane girders making for an optimised lifting height.

• Optimal use of available room height thanks to stooled up crane.
• Extremely low profile.
• Wide suspension spacing.
• Optional electric hoist travel.
• Optional mobile control.

The ZHB-X is your answer should the building height of the ZHB prove to be insufficient. The crane girder of this double girder crane does not run underneath the crane tracks but between them. The total height of the crane is equal to the height of a single profile. A vastly improved lifting height is achieved. This can be very useful if high machinery in the transport area needs to be negotiated.

• Long crane spans possible.
• Low profile compared to overhead travelling cranes.
• Wide suspension spacing.
• Electric hoist travel.
• Optional mobile control.

The ABUS double girder crane ZHB-3 teaches us how obstacles can be overcome: This double girder crane is suspended from three crane tracks. Very long crane spans become thus possible making the crane able to service large surface areas.

• Area-coverage materials handling.
• Very light crane; ideal for use in lightweight buildings.
• Easily moved manually.
• Crane track consisting of standard rolled-section girders.
• Short end approach dimensions.

The ABUS single girder crane EHB-I is a good solution for area-coverage material transport in buildings that have existing rolled-section girders fitted at a distance appropriate for crane tracks. The lightweight crane girder consists of a hollow profile suitable to run directly on this rolled-section girder crane track when combined with the two underslung trolleys.

• High load capacity.
• Particularly favourable lifting height thanks to the chain hoist being placed between the crane girders.
• Crane track consisting of standard rolled-section girders.
• Optional electric hoist travel.
• Optional mobile control.

总线双梁起重机ZHB-I f是我们的答案or heavy loads combined with area-coverage material transport. The ZHB-I is also characterised by long crane girder lengths. The crane travels directly on crane tracks consisting of rolled-section girders. The ABUS chain hoist is also suspended between the crane girders making for an optimised lifting height.

• SWL了to 6.3 t.
• Jib length up to 10 m.
• Slewing range n x 360°.
• Up to 4 t with ABUS electric chain hoist.
• Up to 6.3 t with ABUS electric wire rope hoist.

The pillar jib crane LS has been designed for freestanding installation on the building floor. This workstation crane provides a slew range of270°with jib arm lengths of up to7 mand Safe Working Loads (SWL) of up to1.0 t.Slewing stops allow you to adapt the slewing range to your individual needs.

• SWL了to 5 t.
• Jib length up to 10 m.
• Slewing range 180°.
• Up to 4 t with ABUS electric chain hoist.
• Up to 5 t with ABUS electric wire rope hoist.

The wall jib crane VW has been designed to be mounted on a wall or column. This workstation crane provides a slew range of180°with jib arm lengths of up to10 m and Safe Working Loads (SWL) of up to5 t. The design of the wall jib crane VW enables the given building dimensions to be used to the fullest extent, so that the transfer of the load is achieved at the highest possible lift height.

• SWL了to 1 t.
• Jib length up to 7 m.
• Slewing range 270°.
• With ABUS electric chain hoist.

The pillar jib crane LS has been designed for freestanding installation on the building floor. This workstation crane provides a slew range of270°with jib arm lengths of up to7 mand Safe Working Loads (SWL) of up to1.0 t.Slewing stops allow you to adapt the slewing range to your individual needs.

• SWL了to 1 t.
• Jib length up to 7 m.
• Slewing range 180°.
• With ABUS electric chain hoist.

The wall jib crane LW has been designed to be mounted on a wall or column. This workstation crane provides a slew range of180°with jib arm lengths of up to7 mand Safe Working Loads (SWL) of up to1.0 t.

• SWL了to 0.5 t.
• Jib length up to 7 m.
• Slewing range 270°.
• With ABUS electric chain hoist.

The pillar jib crane LSX has been designed for freestanding installation on the building floor. This workstation crane provides a slew range of270°with jib arm lengths of up to7 mand Safe Working Loads (SWL) of up to0.5 t.

• SWL了to 0.5 t.
• Jib length up to 7 m.
• Slewing range 180°.
• With ABUS electric chain hoist.

The wall jib crane LWX has been designed to be mounted on a wall or column. This workstation crane provides a slew range of180°with jib arm lengths of up to7 m and Safe Working Loads (SWL) of up to0.5 t.

• SWL range 1 t - 16 t
• Compact design.
• Two direct drive cross travel motors.
• Cross travel trolley adjustable to suit various flange widths.

Monorail hoist as economic choice in compact design with favourable dimensions. Safe Working Load range between 1 t and 16 t. Two direct drive cross travel motors. The cross travel trolley is adjustable to suit various flange widths.

• SWL range 1 t - 10 t.
• Hook positioned beside the crane girder.
• Optimised highest hook position.
• 允许将建筑高度降低。

The side-mounted hoist with the hook positioned beside the crane girder achieves an optimised highest hook position. Safe Working Load range between 1 t and 10 t. The combination of optimised highest hook position and the option to design cranes with spans of up to 35 m or more as single girder cranes results in cost advantages when investing in buildings.

• SWL range 6.3 t - 25 t.
• Cross travel trolley with direct drive.
• No exposed reduction gearing.
• Load is distributed over 8 wheels.

Monorail hoist with twin trolleys type U for high load capacities and long hook paths. Safe Working Load range between 6.3 t and 25 t. Direct drives without exposed reduction gearing for cross travel trolleys. Cranes with higher load capacities yet smaller spans can be designed as single-girder cranes when using this hoist.

• SWL range 1 - 63 t.
• Articulated end carriage joints.
• No hook wander or rotation with true vertical lift units.
• Maintenance platform as an option.

Compact double rail crab unit for medium SWL applications up to 63 t. The articulated end carriage joints ensure positive contact of all four wheels with the track. Hoist trolley features two direct drive cross travel motors.

• SWL range 1 t - 40 t.
• Ultra low headroom design.
• Articulated end carriage joints.
• Two direct drive cross travel motors.

Compact crab unit for SWL of up to 40 t. Ultra low headroom design with rope drum axis in the direction of cross travel; with articulated end carriage joints to ensure positive contact of all four wheels with the track and with two direct drive

• SWL range 8 t - 120 t.
• Compact design.
• Articulated end carriage joints.
• Two direct drive cross travel motors.

Compact twin hoist crab unit for Safe Working Loads of up to 120 t with articulated end carriage joints to ensure positive contact of all four wheels with the track and with two direct drive cross travel motors.

• SWL range 1 - 40 t.
• Minimum overall headroom dimensions.
• May be used where very little space is available above the crane.

In contrast to the type D unit, the cross member supporting the hoist between the end carriages is fitted with articulated joints. The hoist headroom is therefore reduced to a minimum. This is the option to use where very little space is available above the crane, as an alternative to type DQA, also a low headroom option.

• SWL了to 200 kg.
• Hook path up to 20 m.
• Mains connection 230 V / single-phase (standard power socket).

A standard power socket with230 Vsuffices for the power supply of the ABUCompact GMC. The GMC is particularly suited to mobile use due to its low weight. The GMC is available with single or double falls and is able to lift loads of up to 100 kg / 200 kg. The lifting speed is infinitely variable. Feasible hook paths reach lengths of up to20米/ 10 m.

• SWL了to 630 kg.
• Hook path up to 32 m.
• Lifting speed up to 20 m/min.

The ABUCompact GM2 is available with 1 or 2 falls. The GM2 lifts loads of up to320 kg / 630 kg. The hooks paths reach lengths of up to32 m / 16 m. Different lifting speeds are available depending on the load capacity.

• SWL了to 1250 kg.
• Hook path up to 50 m.
• Hoist limit switch with up to 4 shut-down points.

The ABUCompact GM4 is available with 1 or 2 falls. The GM4 lifts loads of up to 630 kg / 1.25 t. The hooks paths reach lengths of up to 50 m / 25 m. Different lifting speeds are available depending on the load capacity.

• In single or double fall design.
• SWL了to 1.25 alt. 2.5 t.
• Hook path up to 35 / 17.5 m.
• Extensive additional equipment available.

The ABUCompact GM6 is available with 1 or 2 falls. The GM6 lifts loads of up to1.25 t / 2.5 t. The hooks paths reach lengths of up to35 m / 17.5 m. Different lifting speeds are available depending on the load capacity.

• In single or double fall design.
• SWL了to 2 alt. 4 t.
• Hook path up to 32 / 16 m.
• Extensive additional equipment available.

The ABUCompact GM8 is available with 1 or 2 falls. The GM8 lifts loads of up to2 t / 4 t. The hooks paths reach lengths of up to 32 m / 16 m. Different lifting speeds are available depending on the load capacity. The ABUCompact GM8 features a 48V electronic control as standard.