The KAUP GmbH & Co. KG is the worldwide leading independent producer of forklift trucks attachments. Stationary attachments as well as container spreaders for forklifts and cranes also extend the KAUP product range.
Today the family run business, certified to DIN EN ISO 9001, is one of Europe's leading manufactures of attachments for forklift trucks. It's managed in the fourth generation by Holger Kaup. The company is active worldwide with twelve own subsidiaries, 19 independent representatives and a powerful export department at the company headquarters.
Visit us on:
KAUP集装箱叉车瓜拉ntee efficient handling for all container types. Whether it’s a top spreader, spreader for lateral or frontal pick-up, rigid design or telescopic - KAUP spreaders can be optimally configured for almost any application.
KAUP forklift trucks spreaders ensure maximum handling performance, providing an excellent view of the container corners. This enables the operator to position the spreader quickly and accurately.
For centering the view-optimized designed spreader during positioning on a free-standing container the KAUP Container Spreaders are equipped with folding flippers. Depending to the specific need the crane operator can fold them upwards or downwards.
集装箱从KAUP extr的范围emely diverse. But the individual data concerning type, mounting, details of load calculation, data about the transported containers and other technical specifications render Container Spreaders very complex. Therefore it is necessary to contact us directly to adapt container Spreaders to the particular application.
The Fork Positioner T160B - 'e-operated' is a so-called viable study. This attachment does not need even one drop of hydraulic oil. An absolute novelty!
The T160B - 'e-operated' can be used normally. Why? KAUP has been successful in implementing all known functions of a fork positioner electrically - electronically driven: 'e-operated'. In addition, the patented control system with an open interface opens up new communication options for the attachment and forklift truck. The Fork Positioner T160B - 'e-operated': an attachment 4.0.
让叉定位器T160B——“e-controlled' so special? It's not the drive. Because the attachment still uses hydraulic oil, the same as all other other well-known attachments. Rather, the control system of the fork positioner is surprising.
The new control system enables the control and adaption of the sideshift and fork adjusting functions electronically - 'e-controlled'. Thus the maximum permitted sideshift is always available so that the maximum possible load capacity can always be used. The Fork Positioner T160B - 'e-controlled': an attachment 4.0.
高度的灵活性和多功能性是再保险quired for material handling with construction machinery. Regardless if used in civil engineering, demolition, landscaping, recycling, waste management or in the forestry industry – the machines are used for various applications in order to achieve a high degree of productivity and operating efficiency. A wide range of attachments which are easy to mount and quickly dismount are a guarantee for efficient and flexible operation of construction machinery. Innovation, reliable technology, the high standard of quality of the attachments and excellent value for money, designs that allow easy and economical servicing and as good as one-hundred percent availability of replacement parts have made KAUP GmbH and Co. KG the leading European manufacturer of attachments for forklift trucks. Based on the sophisticated KAUP Modular Built System nearly every material handling task can be configured and using stateof-the art 3D CAD technology attachments are specifically matched to the requirements specified by the customer. But KAUP attachments are not only for forklift trucks. Nearly every kind of KAUP attachment is suitable for wheel loaders, skid-steer loaders, telescopic loaders or any other type of construction machine and a large part of the 40.000 units produced annually are mounted on construction machines. You can trust our proven ability to efficiently solve almost any material handling task.
的标准版equipp KAUP旋转器ed with a fork carriage. It can be rotated 360° endless, containers with a slip-in underlay can be turned for emptying. Standard forks with normal widths can be fixed by means of square stops, included in the delivery, which are bolted onto the lower carriage bar. Rotators can additionally be fitted with a lateral supporting plate, with a down-hold for boxes and crates without a slip-in underlay and with a wider fork carriage in order to meet the specifications of each particular application.
Within the framework of the KAUP modular built system Rotators belong to the group of rotating combinations. Additionally they can be equipped with a sideshift function which supplements the Rotator with a “lateral shift”
Sideshifters are the most common attachments encountered on forklift trucks. Depending on the capacity of the truck Sideshifters allow lateral shift of the load from ± 100 up to ± 160 mm. This saves time and increases manoeuvrability. With the so called Container Sideshifter even larger lateral sideshift stroke is possible.
KAUP has two different versions of Sideshifters in their product range - hook-on version and integrated version.
KAUP Sideshifters can be combined with numerous other KAUP attachments and thus considerable increase the application possibilities.
Many requirements and different widths of fork carriages require an unlimited number of variations. The KAUP High-Performance Sideshifter type T151P2 supplies this variation. In addition, all sideshifter components such as housings, pistons and brackets are identical in design as those used in other KAUP attachments with additional sideshift function. This optimises maintenance and simplifies repairs.
KAUP, as leading manufacturer of attachments, has a comprehensive range of attachments for Reach Trucks. The Sideshifter for Reach Trucks 2T151P2 is the right choice when palletised goods must be shifted laterally on a regular basis. The Sideshifter optimises in-plant material handling.
The KAUP Container Sideshifter T151P-C simplifies loading and unloading of containers. This attachment with increased sideshift stroke makes it possible to reach beyond the chassis width of the forklift truck and place loads close to the container wall.
KAUP提供完整的Sideshift计划强度grated Sideshifters and as integrated Sideshifters with increased lost load centre.
KAUP Multiple Sideshifters considerably rationalise the operation of every forklift truck as with this attachment two, three, four or even five transport units can be picked up at the same time.
One basic sideshifter shifts the complete Multiple Sideshifter with load units laterally. The two, three, four or five additional fork carriages can be shifted simultaneously or individually by hydraulic function. Accordingly the load can be shifted together or apart without problems.
The Double Sideshifter T252B is a part of the KAUP Multiple Sideshifter product range. This attachment extends the operation of every forklift truck as the Double Sideshifter can simultaneously pick up two transport units.
The Triple Sideshifter T253B is a part of the KAUP Multiple Sideshifter product range. This attachment extends the operation of every forklift truck as the Triple Sideshifter can simultaneously pick up two transport units next to each other.
L = Pallet handling lengthwise / Q = Pallet handling crosswise. / L / Q = Pallet handling lengthwise and crosswise.
The Triple Sideshifter T253B-3 is a part of the KAUP Multiple Sideshifter product range. This attachment extends the operation of every forklift truck as the Triple Sideshifter can simultaneously pick up three transport units next to each other.
The demands on material handling tasks are increasingly more complex. KAUP Fork Positioners accommodate these requirements, as they increase the flexibility and profitability with more handling capacity of every forklift truck.
Especially when the width of the load changes constantly. For this reason Fork Positioners are the most frequent attachment found on forklift trucks after sideshifters. And KAUP offers a large variety of Fork Positioners - suitable for every transportation and operational task.
KAUP Fork Positioners are also, in some cases, available as integrated version with even better residual capacity.
The Fork Positioner T156 is the starter series of KAUP Fork Positioners. This attachment with excellent price-performance ratio is designed with hydraulic parallel movement with two cylinders and is based on the P4-Sideshifter.
Simply designed and therefore extremely economical, the KAUP Fork Positioner T163SN has absolutely symmetrical fork adjustment with synchronism via roller chain. This range is based on the Sideshifter T151-P2 rangewith corresponding capacities.
DThe KAUP Fork Positioner, type 2T163S, a specially innovative attachment. Innovative because it combines best visibility and a very compact, low construction height with a large sideshift stroke and extremely robust drive technology inclusive of double roller chains. This attachment is therefore outstanding for loading and unloading containers, for handling narrow loads and loads with low entry height.
The KAUP Fork Positioner T160 offers an excellent view to the fork tips and the load as well as a favourable lost load centre. Therefore the achievable residual capacity is very good. The qualities of this attachment are particularly effective when different sizes of loads are regularly transported or different kinds of transportation are used - for example in logistics.
The KAUP integrated Fork Positioner T160BI is an economical integrated Fork Positioner with excellent view to the fork tips and load. Compared to hook-on attachments in the T160 range this Fork Positioner has an even better, higher residual capacity.
The KAUP integrated Fork Positioner T160ITW is an economical integrated Fork Positioner with excellent view to the fork tips and load. Compared to hook-on attachments in the T160 range this Fork Positioner in Terminal-West version has an even better, higher residual capacity.
The KAUP hook-on Fork Positioner T160Z (A) is an economical Fork Positioner with welded on or screwed on forks offering an excellent view to the fork tips and load. Therefore the achievable residual capacities are very good.The qualities of the range of T160Z (A) Fork Positioners are particularly effective when different sizes of loads are regularly transported or different kinds of transportation are used - for example in logistics.
The integrated KAUP Fork Positioner T160IZ(A) is an economical integrated Fork Positioner with welded on or screwed on forks offering an excellent view to the fork tips and load. Compared to hook-on attachments in the T160Z(A) range this Fork Positioner has an even better, higher residual capacity.
The KAUP hook-on Fork Positioner T466 has been specially designed with optimised visibility and residual capacity. This attachment is manufactured from well proven components and is suitable for moderately heavy duty tasks. The qualities of the range of T466 Fork Positioners are particularly effective when different sizes of loads are regularly transported or different kinds of transportation are used - for example in logistics.
The KAUP integrated Fork Positioner T466BI has been specially designed with optimised visibility and residual capacity. Compared to hook-on Fork Positioners in the T466 range with even better, higher residual capacities this attachment is manufactured from well proven components and is suitable for moderately heavy duty tasks. The qualities of the range of T466BI Fork Positioners are particularly effective when different sizes of loads are regularly transported or different kinds of transportation are used - for example in logistics.
The KAUP hook-on Fork Positioner T466Z(A) has been specially designed with optimised visibility and residual capacity. This attachment is manufactured from well proven components and is suitable for moderately heavy duty tasks. The qualities of the range of T466Z(A) Fork Positioners are particularly effective when different sizes of loads are regularly transported or different kinds of transportation are used - for example in logistics.
The KAUP integrated Fork Positioner T466BIZ (A) has been specially designed with optimised visibility and residual capacity. Compared to hook-on Fork Positioners in the T466 range with even better, higher residual capacities this attachment is manufactured from well proven components and is suitable for moderately heavy duty tasks. The qualities of the range of T466BIZ (A) Fork Positioners are particularly effective when different sizes of loads are regularly transported or different kinds of transportation are used - for example in logistics.
KAUP, as leading manufacturer of attachments, also has a comprehensive range of attachments for Reach Trucks. The Fork Positioner type T466ZH is one of them.
Individual details regarding wheel arms and ground clearance as well as the possible width of the attachment and other technical details make Reach Trucks very complex. Therefore it is advisable to contact our specialists directly for an individual consultation regarding our attachments and accessories for Reach Trucks.
KAUP, as leading manufacturer of attachments, also has a comprehensive range of attachments for Reach Trucks. The Fork Positioner type T160B is one of them. Individual details regarding wheel arms and ground clearance as well as the possible width of the attachment and other technical details make Reach Trucks very complex. Therefore it is advisable to contact our specialists directly for an individual consultation regarding our attachments and accessories for Reach Trucks.
KAUP, as leading manufacturer of attachments, also has a comprehensive range of attachments for Reach Trucks. The Fork Positioner type T160BZ is one of them. Individual details regarding wheel arms and ground clearance as well as the possible width of the attachment and other technical details make Reach Trucks very complex. Therefore it is advisable to contact our specialists directly for an individual consultation regarding our attachments and accessories for Reach Trucks.
The robust KAUP Fork Positioner T410Z is the alternative to Fork Positioner T466B when a large opening range is required on a small construction width. This attachment is ideal for heavy duty operation and is supplied without forks. Numerous individual configurations are possible.
The KAUP hook-on Fork Positioner T411Z is a robust attachment for exceptionally heavy duty operation - ideal for uneven surfaces. Spreading forces induced, for example when handling coils (several) cable drums, rolls or wire coils, can readily be supported due to the large overlap of sectional profiles between fork guide and clamp body. Speedy working cycles and millimetre accurate positioning of the transport load is possible.
The KAUP hook-on Fork Positioner T411BZ is a robust attachment with large opening ranges for exceptionally heavy duty operation - ideal for uneven surfaces. The construction of this Fork Positioner predestines it for handling long loads and steel girders and especially for heavy duty operation in, for example, concrete plants.
The KAUP integrated Fork Positioner T411BZI is a robust attachment with very large opening ranges suitable for exceptionally heavy duty operation - ideal for uneven surfaces. The construction gives an optimal view to the fork tips. The residual capacity is, due to the integration in the mast of the forklift truck, higher than the T411BZ range.
The KAUP hook-on Fork Positioner with Round Forks T411ZR is a robust attachment for exceptionally heavy duty operation - ideal for uneven surfaces. Spreading forces induced, for example when handling coils (several) cable drums, rolls or wire coils, can readily be supported due to the large overlap of sectional profiles between fork guide and clamp body. Speedy working cycles and millimetre accurate positioning of the transport load is possible between the forks or with the round forks.
This attachment combines the advantages of two KAUP series: Rotators and Fork Positioners. With the 1000-fold proven basic components of the KAUP modular system the result is a robust device with numerous different application possibilities.
The design is, in principle, the same as the normal T456BZ version, the foundry version of this attachment range is suitable for applications with extremely high working temperatures as found, for example, in steel works. Compared to the T456BZ, the KAUP Rotating Fork Positioner T456ZG has a closed front plate and basic plate as well as heat resistant coated hydraulic pipes.
KAUP Multi Pallet Handlers significantly rationalise in-plant transportation and are in operation world wide in all branches of industry. They are put into operation where several pallets or other loads are transported simultaneously; therefore KAUP Multi Pallet Handlers contribute to efficient and economical logistics. The construction consisting of KAUP T-profiles, C-profiles and, depending on the model, round profiles ensures highest stability even under tough working conditions, long operation with extended intervals between servicing and a minimum of required maintenance.
The newly designed Double Pallet Handler range T429C set new standards for Multi Pallet Handlers in lost load centre, residual capacity and visibility through and over the attachments to the fork tips and load. The practice orientated solid construction from T-profiles and C-profiles ensures highest stability and long operating hours with extended intervals between servicing and a minimum of required maintenance. At the same time the new Double Pallet Handler consumes 20% less energy.
The simple construction of KAUP Triple Pallet Handler T429B-1-2-3 with innovated visibility improved design ensures a clear view through and over the attachment to the fork tips and load. The practice orientated construction from T-profiles and C-profiles ensures highest stability and long operating hours with extended intervals between servicing and a minimum of required maintenance even in heavy duty operation. The excellent residual capacity compared to similar models increases the productivity of this Multi Pallet Handler even more.
The KAUP Sixfold Pallet Handler T429-4-6 can transport up to six pallets at the same time and makes speedy loading of lorries or wagons from the side possible as well as loading and unloading double deep storage racks. The innovative visibility improved design makes this attachment the lightest in its class with comparable capacity. T-profiles and C-profiles ensure highest stability and long operating hours with extended intervals between servicing and a minimum of required maintenance even in heavy duty operation.
The KAUP Four / Eight Pallet Handler type T419-2-4/T419-4-8-L can transport up to eight pallets at the same time and speeds up loading and unloading of trucks, wagons and storage racks considerably. The innovative visibility improved design ensures a good view to the fork tips and load. The practice orientated construction from T-profiles and C-profiles ensures highest stability and long operating hours with extended intervals between servicing and a minimum of required maintenance.
众所周知的组合KAUP多Pallet Handler with a Pantograph T149Z creates an attachment with a multitude of application possibilities. It makes speedy loading of lorries or wagons from the side possible as well as loading and unloading double deep storage racks. As with all other KAUP Multi Pallet Handlers, the Double Pallet Handler with Pantograph type T429C/T149Z has a durable and reliable construction with a minimum of required maintenance with maximum operation.
众所周知的组合KAUP多Pallet Handler with a Pantograph T149Z creates an attachment with a multitude of application possibilities. It makes speedy loading of lorries or wagons from the side possible as well as loading and unloading double deep storage racks. As with all other KAUP Multi Pallet Handlers, the Triple Pallet Handler with Pantograph type T429B-1-2-3/T149Z has a durable and reliable construction with a minimum of required maintenance with maximum operation.
The Rotators of KAUP are the right choice to turn load, to empty container, to tip recumbent load on a palette or to put up a recumbent load. Driven by four possible oil engines and three differently big snail gears running in the oil bath, these attachments can be equipped with fork carriage as well as forks. In addition, they are the base for numerous rotating attachment combination.
Beside the normal versions of his Rotators KAUP also has special variations for the fishing economy and for foundries on offer.
With the Ladle Tipper of KAUP different foundry ladles can be taken up, be transported as well be emptied to the left, on the right and forwards.
The KAUP Rotator 360° endless T351 is the entrance in the world of the rotating attachments.
According to application case and customer wish the gear can be positioned at two different places. Differing lost loads and residual capacities are the results.
在铸造实现KAUP旋转器360° endless T351 is also available in two fishing implementation. These attachments are adapted to the demands of this operational area with special sea-water resistant paint, galvanised screws, flanges and fork carriages (according to implementation) as well as with silicone to close drillings and drill holes sealed. But also for tannings this device is suitable.
The KAUP Rotator 360° endless T351 is also available in a foundry implementation. This attachment is adapted to the demands of this operational area with a closed fork carriage plate and a closed base plate as well as heat-resistant covered hydraulic tubes. Otherwise this rotator resembles the T351.
As opposed to the entrance models of the rotating attachments the KAUP Rotator 360° endless T391 owns a sideshift. It allows an even more exact work with the device.
According to application case and customer wish the gear can be positioned at two different places. Differing lost loads and residual capacities are the results.
The KAUP Rotator 360° endless T391 is also available in a foundry implementation. This attachment is adapted to the demands of this operational area with a closed fork carriage plate and a closed base plate as well as heat-resistant covered hydraulic tubes. Otherwise this rotator resembles the T391.
在铸造实现KAUP旋转器360° endless T391 is also avialable in two fishing implementation. These attachments are adapted to the demands of this operational area with special sea-water resistant paint, galvanised screws, flanges and fork carriages (according to implementation) as well as drill holes sealed with silicon.
For extra heavy cases: the KAUP Rotator 360° endless from 10T351. It owns an especially high torque and can use also heavy loads easily as carriages for example.
The KAUP Casting Device for Foundry Ladles T360G can be used to empty ladles to the left, on the right and forwards. For it the attachment is hung up directly in the fork carriage.
With the KAUP Ladle Tipper T360 underrun ladles can be taken up, be transported and be tipped to a side partially or completely. The construction of this attachment permits exact, selective emptying of the pouring good.
The Fork Clamps of KAUP can be used to the transport of palletised good as well as for clamp works.
With different slip-on clamp arms these attachments become special clamps to transport, for example, stones or barrels with few handles.
Combined with other attachments of KAUP the application possibilities of the fork clamps still increase once more.
The variously applicable Fork Clamp T411 is the base for all clamps of KAUP. Therefore, this attachment particularly suitable for hard use can be adapted very well to the individual demands. No matter, whether different hook-on fork cross sections for divergent charges, changed hook-on fork forms or the combination with other attachments: KAUP makes it possible.
The KAUP Harbour Clamp T411AH is a variation of the fork clamp. Particularly two things make this attachment special: On the one hand on about 2/3 of the hook-on fork length also in the hook-on fork width to rejuvenated sharpened hook-on forks (knife hook-on forks) to be able to take up standing transport property also close together. And on the other hand the parts protected against starting-up damages of the fork clamp - cylinder and side racketeer's unity.
Flexibility is the motto of the KAUP Fork Clamp with Turnable Forks T411D. This clamp is a very universally applicable attachment, because the carrying part of the hook-on forks is turnable by ± 90°. Therefore, the rotary hook-on fork clamp can be used for hook-on fork works as well as the clamps by bale, boxes and cardboards. If the carrying part are turned only around by 45°, besides, the transport of barrels or other cylindrical bodies is easily possible.
In order to increase the application possibilities of Fork Clamps KAUP can supply suitable slip-on clamping arms for nearly every application.
Regardless if for transportation of pallets or grate boxes or to clamp different types of loads: KAUP attachments become even more flexible with a large range of clamping arms.
underslung version with vulcollan lining
KAUP Block Arms T102UVP are the right choice to pick up packets of blocks and bricks. The underslung Block Arms are simply slipped on the carrying part of the existing forks and secured.
underslung Block & Brick Arms
KAUP underslung Block & Brick Arms T102UH are designed with mechano-hydraulic equilibration with different coatings which compensate irregular contours so that the load can be clamped optimally.
slip-on version with vulcollan linings
KAUP underslung Block arms T102VP are designed to clamp and transport packets of building blocks. If required the height of the arms can be doubled.
When cylindrical drums - regardless if steel, plastic or other - stored vertically or horizontally - need only be handled occasionally KAUP Rotating Roll Arms T106A are the right choice.
KAUP Rotating Roll Arms T106AH 90° are used when cylindrical loads are only occasionally picked up and tilted or turned.
Cylindrical loads can be picked up and turned by 180° and completely emptied with KAUP Rotating Roll Arms T106AH 180°.
For KAUP ranges T160 (from 6T), T410Z, T411, T411Z,, T411ZR, T411D, T412, T413, T414, T415, T406, T466 (from 6T) Attachment is available for operation in explosion hazardous areas.
Specification:
The KAUP Load Backrest T479 has been designed to secure and stabilize loads transported with all kinds of KAUP Fork Positioners and Clamps.
Qualities:
Special attachments from our long-standing partner, B&B Attachments (B&B), can now also be purchased directly from KAUP. BlockMaster, LayerMaster and PowerMount complement the KAUP product range with their unique individual product features.
B&B is the leading specialist for material handling solutions in the UK and Ireland and has been successfully selling KAUP attachments for over 40 years.
The building materials industry is a demanding one. Handling the various products in production and on the construction site can be very time-consuming and expensive. B&B Attachments has adapted to meet the special requirements of this industry with the BlockMaster range.
The BlockMaster range has been developed to withstand the tough conditions of the brick and block industry. It offers a complete range of specialist clamps for the building materials industry. BlockMaster is optimised for maximum productivity in palletless handling of brick, block, flag and kerb products.
The LayerMaster from B&B Attachments is a layer picking device. It offers the warehouse and logistics industry the innovative solution for both single layer picking and pallet load splitting.
In a warehouse or distribution centre, picking typically accounts for about 25 per cent of total labour costs. The LayerMaster can handle orders of more than 1,000 cartons per hour. By comparison, manual picking can handle a maximum of 100-250 cartons per hour. Combining a LayerMaster with a forklift truck, allows single or multiple layers of products to be picked and mixed pallets to be assembled quickly, safely, and efficiently with a minimum of manual labour.
PowerMount is a quick release system which provides a faster, easier and safer way to interchange forklift attachments. Attachments can now be safely engaged and disengaged by the driver in 60 - 90 seconds, making your forklift fleet more flexible and cost-effective.
