• MATERIAL HANDLING21XX

    Videos
    Loading the player ...
    • Offer Profile
    • Zaber's extensive line of computer controlled motorized linear slides, miniature linear actuators, motorized rotary stages, motorized mirror mounts, goniometers and other devices, make automating sub-micron positioning applications quick, easy, and affordable.

      Zaber机动线性幻灯片,线性致动器and other products are easier to set up than competing devices. Multiple linear actuator or linear slide devices, as well as rotation stages, mirror mounts, and/or stepper motor controllers can be daisy-chained tao a single serial or USB port on any computer. No additional hardware or motor controllers are required.

      See how easy it is to install a Zaber linear actuator.

      This setup facilitates a low entry-level cost without sacrificing expandability. For example, you may purchase a single motorized linear slide to automate one axis of your application, then add additional linear actuators, linear slides, rotation stages, mirror mounts, stepper motors, etc to automate more axes as your time and budget permits.
    Product Portfolio

    • Linear Actuators

        • Motorized with Built-in Controllers and Motor Encoders

              • X-NA-E Series

              • Micro linear actuators with built-in controllers and motor encoders

                25 and 50 mm travel
                Up to 30 mm/s speed and up to 25 N thrust
                Built-in controller; daisy-chains with other Zaber products
                Built-in, 250 CPR, motor encoder provides slip/stall detection and recovery
                Designed to replace standard micrometer heads on manual translation stages
                Hardened ball-tip (removable so you can use the built-in threaded tip or a flat tip)

          • Motorized Linear Actuators with Built-in Controllers

              • X-NA Series

              • Micro linear actuators with built-in controllers

                25 and 50 mm travel
                Up to 30 mm/s speed and up to 25 N thrust
                Built-in controller; daisy-chains with other Zaber products
                Designed to replace standard micrometer heads on manual translation stages
                Hardened ball-tip (removable so you can use the built-in threaded tip or a flat tip)

              • T-NA Series

              • Micro linear actuators with built-in controllers

                25 and 50 mm travel
                Up to 8 mm/s speed and up to 50 N thrust
                Our most compact, precise and robust actuators with built-in controllers
                Built-in controller; daisy-chains data and power with other T-Series products
                Designed to replace standard micrometer heads on manual translation stages
                Hardened ball-tip (removable so you can use the built-in threaded tip or a flat tip)
                Custom versions available

            • Motorized Linear Actuators

                  • LAC Series

                  • Compact motorized linear actuators
                    Compact size: great for applications with limited space
                    10 mm travel
                    Resolution down to 0.024 µm
                    Multiple tip options included
                    Designed for use with an X-MCB1 controller or any 2-phase stepper motor controller

              • Linear Stages

                  • Motorized with Built-in Controllers and Linear Encoders

                      • X-LDQ-AE Series

                      • 高。d, precision linear motor stages with built-in controllers

                        Minimum incremental move of 50 nm
                        Integrated linear encoder provides high accuracy closed loop servo positioning
                        Up to 1.5 m/s speed and up to 2 g acceleration
                        75, 150, 300, 450, 600 and 1000 mm travel
                        Up to 2.5 µm accuracy over 1000 mm travel
                        Built-in controller; daisy-chains with other Zaber products
                        Zero backlash
                        One digital input and two digital outputs
                        Technical Article - Linear Motors: Overview and Selection Process

                      • X-LDM-AE Series

                      • Ultra precision linear motor stages with built-in controllers

                        High repeatability (80 nm) and accuracy (1 µm), with 25 nm minimum incremental move
                        Direct position measurement from 1 nm resolution linear encoder
                        Up to 1.2 m/s speed and up to 3.5 g acceleration
                        60, 110, 210 mm travel options
                        Built-in controller; daisy-chains with other Zaber products
                        Non-contact ironless linear motor for ultra precision, high dynamics and zero backlash
                        One digital input and two digital outputs
                        Mounts directly in XY
                        Technical Article - Linear Motors: Overview and Selection Process

                      • X-LDA-AE Series

                      • Miniature linear motor stages with built-in controllers

                        High repeatability (200 nm) and accuracy (1 µm), with 20 nm minimum incremental move
                        Direct position measurement from 1 nm resolution linear encoder
                        Up to 0.8 m/s speed and up to 4 g acceleration
                        25, 75, 150 mm travel options
                        Built-in controller; daisy-chains with other Zaber products
                        Non-contact ironless linear motor for high precision, high dynamics & zero backlash
                        One digital input and two digital outputs
                        Mounts directly in XY
                        Technical Article - Linear Motors: Overview and Selection Process

                      • X-LRT-AEC Series

                      • High-load, high accuracy linear stages with built-in controllers, linear encoders, and dust covers

                        100, 250, 500, 750, 1000 mm travel
                        20 µm full travel accuracy
                        300 kg load capacity
                        Built-in controller; daisy-chains with other Zaber products
                        Integrated linear encoders with 50 nm resolution provide slip/stall detection and position correction
                        Ball screw and lead screw configurations
                        Includes stainless steel dust covers

                      • X-LRQ-DEC Series

                      • High precision stages with built-in controllers and linear encoders and dust covers

                        75, 150, 300, 450, 600 mm travel
                        Up to 13 µm accuracy over 600 mm travel
                        100 kg load capacity
                        Up to 205 mm/s speed and up to 300 N thrust
                        Built-in controller; daisy-chains with other Zaber products
                        Integrated linear encoders with 50 nm resolution provide slip/stall detection and position correction
                        Inline and parallel drive configurations
                        Ball screw and lead screw configurations
                        Includes stainless steel dust cover
                        Custom versions available

                      • X-LRQ-DE Series

                      • High precision stages with built-in controllers and linear encoders

                        75, 150, 300, 450, 600 mm travel
                        Up to 13 µm accuracy over 600 mm travel
                        100 kg load capacity
                        Up to 205 mm/s speed and up to 300 N thrust
                        Built-in controller; daisy-chains with other Zaber products
                        Integrated linear encoders with 50 nm resolution provide slip/stall detection and position correction
                        Inline and parallel drive configurations
                        Ball screw and lead screw configurations
                        Custom versions available

                      • X-LRM-DE Series

                      • Miniature, steel, motorized linear stages with built-in controllers and linear encoders
                        Hardened steel construction and recirculating ball bearing guide provide exceptional stiffness and thermal stability
                        100, 150, 200 mm travel
                        Integrated linear encoders with 50 nm resolution provide slip/stall detection and position correction
                        15 µm accuracy over 200 mm
                        50 kg load capacity
                        Built-in controller, daisy chains with other Zaber products

                      • X-DMQ-AE Series

                      • Zaber's X-DMQ-AE Series devices are computer-controlled, direct-drive voice coil driven, linear stages with high acceleration and precision capabilities in a compact size. They are stand-alone units requiring only a standard 24 V or 48 V power supply.

                        At only 30 mm high, these miniature stages are excellent for applications where a low profile is required. The X-DMQ-AE's innovative design allows speeds up to 1400 mm/s and loads up to 10 kg. Like all of Zaber's products, the X-DMQ-AE Series is designed to be 'plug and play' and very easy to set up and operate.

                    • Motorized with Built-in Controllers and Motor Encoders

                        • X-LRT-EC Series

                        • High-load, closed-loop stages with built-in stepper motors, motor encoders, controllers, and dust covers
                          100, 250, 500, 750, 1000, 1500 mm travel
                          500 kg load capacity
                          High cantilever stiffness
                          Up to 700 mm/s speed and up to 1200 N thrust
                          Built-in controller; daisy-chains with other Zaber products
                          Built-in, 400 CPR, motor encoder provides slip/stall detection and recovery
                          Ball screw and lead screw configurations
                          Includes stainless steel dust covers

                        • X-LRQ-EC Series

                        • 内置步进电机闭环阶段,motor encoders, controllers, and dust covers
                          75, 150, 300, 450, 600 mm travel
                          100 kg load capacity
                          Up to 840 mm/s speed and up to 300 N thrust
                          Built-in controller; daisy-chains with other Zaber products
                          Integrated, 500 CPR, motor mounted encoder provides slip/stall detection and recovery
                          Inline and parallel drive configurations
                          Ball screw and lead screw configurations
                          Includes stainless steel dust cover
                          Custom versions available

                        • X-LRQ-E Series

                        • 内置步进电机闭环阶段,motor encoders, and controllers

                          75, 150, 300, 450, 600 mm travel
                          100 kg load capacity
                          Up to 840 mm/s speed and up to 300 N thrust
                          Built-in controller; daisy-chains with other Zaber products
                          Integrated, 500 CPR, motor mounted encoder provides slip/stall detection and recovery
                          Inline and parallel drive configurations
                          Ball screw and lead screw configurations
                          Custom versions available

                        • X-LSQ-E Series

                        • 内置步进电机闭环阶段,motor encoders, and controllers

                          75, 150, 300, 450 and 600 mm travel
                          20 kg load capacity
                          Up to 1 m/s speed and up to 100 N thrust
                          Encoder position feedback with slip/stall detection and automatic recovery
                          Built-in controller; daisy-chains with any other Zaber products
                          Custom versions available

                        • X-BLQ-E Series

                        • Closed-loop, belt-driven linear stages with built-in stepper motors, motor encoders, and controllers

                          70, 145, 295, 445, 595, 1045, 1495, 2095, 3000 mm travel
                          Up to 2.0 m/s speed, 20 N thrust, and 20 kg load capacity
                          Encoder position feedback with slip/stall detection and automatic recovery
                          Built-in controller; daisy-chains with any other Zaber products

                        • X-LRM-E Series

                        • Miniature, steel, motorized linear stages with built-in controllers and motor encoders
                          Hardened steel construction and integrated recirculating ball bearing guide provide exceptional stiffness and thermal stability
                          25, 50, 100, 150, 200 mm travel
                          Motor encoder position feedback with slip/stall detection and automatic recovery
                          Up to 8 µm accuracy and 50 nm resolution
                          50 kg load capacity
                          Built-in controller, daisy-chains with other Zaber products

                        • X-LSM-E Series

                        • Miniature motorized linear stages with built-in motor encoder and controllers
                          25, 50, 100, 150, 200 mm travel
                          10 kg load capacity
                          Up to 104 mm/s speed and up to 55 N thrust
                          Built-in controller; daisy-chains with other Zaber products
                          Integrated, 200 CPR, motor mounted encoder provides slip/stall detection and recovery
                          Custom versions available

                        • X-LHM-E Series

                        • Motorized linear stages with built-in controllers and motor encoders

                          25, 50, 100, 150, 200 mm travel
                          3 kg load capacity
                          Up to 65 mm/s speed and up to 25 N thrust
                          Our most affordable linear stage with built-in controller and motor encoder
                          Daisy-chains with other Zaber products

                        • X-LSQ-EC Series

                        • speed motorized linear stages with built-in controllers, motor encoders, and covers

                          Built-in controller or motor-only models
                          75, 150, 300, 450, 600 mm travel
                          Motor encoder option for slip/stall detection and automatic recovery

                        • X-BLQ-EC Series

                        • Motorized Linear Stages with Built-in Controllers and Covers

                          Belt drive for long travel and high speed
                          70, 145, 295, 445, 595, 1045, 1495, 2095, 3000 mm travel
                          Dust cover options to keep out moderate debris

                        • LC40B-KM01 Series

                        • Belt-driven T-slot extrusion compatible linear guides with built-in controllers and motor encoders

                          Proprietary design combining a profile linear bearing with T-slot extrusion
                          Recirculating ball bearings for high load and lifetime
                          Configurable length up to 3500 mm in 50 mm increments

                      • Motorized with Built-in Controllers

                          • X-LRT-C Series

                          • High-load, motorized linear stages with built-in controllers and dust covers
                            100, 250, 500, 750, 1000, 1500 mm travel
                            500 kg load capacity
                            High cantilever stiffness
                            Up to 700 mm/s speed and up to 1200 N thrust
                            Built-in controller; daisy-chains with other Zaber products
                            Ball screw and lead screw configurations
                            Includes stainless steel dust covers

                          • X-LSQ Series

                          • Motorized linear stages with built-in controllers

                            75, 150, 300, 450 and 600 mm travel
                            20 kg load capacity
                            Up to 1 m/s speed and up to 100 N thrust
                            Built-in controller; daisy-chains with other Zaber products
                            Custom versions available

                          • X-LRM Series

                          • Miniature, steel, motorized linear stages with built-in controllers

                            Hardened steel construction and integrated recirculating ball bearing guide provide exceptional stiffness and thermal stability
                            25, 50, 100, 150, 200 mm travel options
                            Up to 8 µm accuracy and 50 nm resolution
                            50 kg load capacity
                            Built-in controller, daisy-chains with other Zaber products

                          • X-LSM Series

                          • Miniature motorized linear stages with built-in controllers
                            25, 50, 100, 150 and 200 mm travel
                            10 kg load capacity
                            Up to 104 mm/s speed and up to 55 N thrust
                            Built-in controller; daisy-chains with other Zaber products
                            Custom versions available

                          • X-LHM系列

                          • Motorized linear stages with built-in controllers
                            25, 50, 100, 150, 200 mm travel options
                            3 kg load capacity
                            Up to 65 mm/s speed and up to 25 N thrust
                            Our most affordable linear stage with built-in controller
                            Daisy-chains with other Zaber products

                          • X-LSQ-C Series

                          • High-speed motorized linear stages with built-in controllers and covers

                            75, 150, 300, 450 and 600 mm travel
                            50 kg load capacity
                            Up to 1 m/s speed and up to 100 N thrust
                            Includes rigid cover

                        • Motorized with Built-in Linear Encoders

                            • LRQ-DEC Series

                            • High precision linear stages with built-in linear encoders and dust covers

                              75, 150, 300, 450, 600 mm travel
                              Up to 13 µm accuracy over 600 mm travel
                              100 kg load capacity
                              Up to 205 mm/s speed and up to 300 N thrust
                              Integrated linear encoders with 50 nm resolution provide slip/stall detection and position correction
                              Inline and parallel drive configurations
                              Ball screw and lead screw configurations
                              Includes stainless steel dust cover
                              Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                              Custom versions available

                            • LRQ-DE Series

                            • High precision linear stages with built-in linear encoders
                              75, 150, 300, 450, 600 mm travel
                              Up to 13 µm accuracy over 600 mm travel
                              100 kg load capacity
                              Up to 205 mm/s speed and up to 300 N thrust
                              Integrated linear encoders with 50 nm resolution provide slip/stall detection and position correction
                              Inline and parallel drive configurations
                              Ball screw and lead screw configurations
                              Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                              Custom versions available

                          • 机动内置电机编码器

                              • LRT-EC Series

                              • High-load motorized linear stages with built-in motor encoders and dust covers

                                100, 250, 500, 750, 1000, 1500 mm travel
                                500 kg load capacity
                                High cantilever stiffness
                                Up to 360 mm/s speed and up to 1200 N thrust
                                Built-in, 400 CPR, motor encoder provides slip/stall detection and recovery
                                Ball screw and lead screw configurations
                                Includes stainless steel dust covers

                              • LRQ-EC Series

                              • Motorized linear stages with built-in motor encoders and dust covers

                              • LRQ-E Series

                              • Motorized linear stages with built-in motor encoders
                                75, 150, 300, 450, 600 mm travel
                                100 kg load capacity
                                Up to 840 mm/s speed and up to 300 N thrust
                                Encoder position feedback with slip/stall detection and automatic recovery
                                Inline and parallel drive configurations
                                Ball screw and lead screw configurations
                                Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                Custom versions available

                              • LSQ-E Series

                              • High-speed motorized linear stages with built-in motor encoders
                                75, 150, 300, 450 and 600 mm travel
                                20 kg load capacity
                                Up to 1 m/s speed and up to 100 N thrust
                                Encoder position feedback with slip/stall detection and automatic recovery
                                Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                Custom versions available

                              • LRM-E Series

                              • Miniature, steel motorized linear stages with built-in motor encoders
                                Hardened steel construction and integrated recirculating ball bearing guide provide exceptional stiffness and thermal stability
                                25, 50, 100, 150, 200 mm travel
                                Up to 8 µm accuracy and 50 nm resolution
                                Encoder position feedback with slip/stall detection and automatic recovery
                                50 kg load capacity
                                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                              • LSM-E Series

                              • Miniature motorized linear stages with built-in motor encoders
                                25, 50, 100, 150 and 200 mm travel
                                10 kg load capacity
                                Encoder position feedback with slip/stall detection and automatic recovery
                                Multiple LSM-E stages can be assembled in XY or XYZ configurations without additional hardware
                                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                Custom versions available

                              • LHM-E Series

                              • Economy motorized linear stage with built-in motor encoders
                                3 kg load capacity
                                Up to 65 mm/s speed; 25 N peak thrust
                                50 N⋅cm cantilever load
                                Encoder position feedback with slip/stall detection and automatic recovery
                                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                              • LSQ-EC Series

                              • High-speed motorized linear stages with built-in motor encoders and covers

                                75, 150, 300, 450 and 600 mm travel
                                Up to 1 m/s speed and up to 100 N thrust
                                50 kg load capacity
                                Includes rigid cover
                                Encoder position feedback with slip/stall detection and automatic recovery

                              • LC40B-KM02 Series

                              • Belt-driven T-slot extrusion compatible linear guides with built-in stepper motors and motor encoders

                                Up to 3500 mm travel length, available in 50 mm increments
                                Compatible with most 40 mm T-slot extrusion framing systems and accessories
                                Includes NEMA 23 stepper motor with built-in encoder
                                Recirculating ball bearing carriage for high load and lifetime

                            • Motorized

                                • LRT-C Series

                                • High-load motorized linear stages with dust covers
                                  100, 250, 500, 750, 1000, 1500 mm travel
                                  500 kg load capacity
                                  High cantilever stiffness
                                  Up to 360 mm/s speed and up to 1200 N thrust
                                  Ball screw and lead screw configurations
                                  Includes stainless steel dust covers

                                • LSQ Series

                                • Motorized linear stages
                                  75, 150, 300, 450 and 600 mm travel
                                  20 kg load capacity
                                  Up to 1 m/s speed and up to 100 N thrust
                                  Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                  Custom versions available

                                • LRM Series

                                • Miniature, steel motorized linear stages
                                  Hardened steel construction and integrated recirculating ball bearing guide provide exceptional stiffness and thermal stability
                                  25, 50, 100, 150, 200 mm travel
                                  Up to 8 µm accuracy and 50 nm resolution
                                  50 kg load capacity
                                  Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                                • LSM Series

                                • Miniature motorized linear stages
                                  25, 50, 100, 150 and 200 mm travel
                                  10 kg load capacity and up to 104 mm/s speed
                                  Very low profile at only 21 mm stage height
                                  Can be mounted in XY and XYZ configurations
                                  Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                  Custom versions available

                                • LHM Series

                                • Economy m3 kg load capacity
                                  Up to 65 mm/s speed; 25 N peak thrust
                                  50 N⋅cm cantilever load
                                  Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                  otorized linear stage

                                • LSA Series

                                • Micro motorized linear stages10 or 25 mm travel
                                  Up to 10 mm/s speed and up to 3.5 kg thrust
                                  Fits into the most restrictive spaces
                                  Mounts directly in XY (requires AB106 angle bracket for Z axis/vertical mounting)
                                  Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                              • Non-motorized

                                  • TSB Series

                                  • Translation stages
                                    25, 28, 50 and 60 mm travel
                                    10 kg load capacity
                                    Available with a micrometer head
                                    Stages without a manual micrometer require a X-NA, T-NA08, T-LA, or an NA11

                                  • LC40 Series

                                  • T-slot extrusion compatible linear guides

                                    Up to 3500 mm travel length, available in 50 mm increments
                                    Recirculating ball bearing carriage for high load and lifetime
                                    Optional integrated belt drive

                                • Vertical Stages

                                    • Motorized Vertical Stages with Built-in Controllers

                                        • X-LDM-AEZ

                                        • Ultra precision vertical stages with built-in controllers

                                          40 mm or 60 mm travel
                                          Passive, user adjustable magnetic counterbalance for payloads up to 55 N
                                          High repeatability (80 nm) and accuracy (1 µm), with 25 nm minimum incremental move
                                          Direct position measurement from 1 nm resolution linear encoder

                                        • X-LDA-AEZ

                                        • High precision vertical stages with built-in controllers

                                          20 mm or 25 mm travel
                                          Passive, user adjustable magnetic counterbalance for payloads up to 16 N
                                          High repeatability (200 nm) and accuracy (1.5 µm), with 20 nm minimum incremental move
                                          Direct position measurement from 1 nm resolution linear encoder Up to 0.7 m/s speed and up to 2.5 g acceleration

                                        • X-VSR-E

                                        • Vertical lift stages with built-in controllers and motor encoders

                                          20 mm travel
                                          Up to 48 mm/s speed and up to 200 N thrust
                                          10 kg load capacity

                                        • X-VSR Series

                                        • Vertical lift stages with built-in controllers

                                          20 mm or 40 mm travel
                                          Up to 48 mm/s speed and up to 200 N thrust
                                          10 kg load capacity
                                          55 or 85 mm retracted height
                                          Built-in controller; daisy-chains with other Zaber products

                                      • Motorized Vertical Stages

                                          • LDM-AEZ

                                          • Ultra precision vertical stages

                                            40 mm or 60 mm travel
                                            Passive, user adjustable magnetic counterbalance for payloads up to 55 N
                                            High repeatability (80 nm) and accuracy (1 µm), with 25 nm minimum incremental move
                                            Direct position measurement from 1 nm resolution linear encoder
                                            Up to 0.8 m/s speed and up to 1.6 g acceleration

                                          • LDA-AEZ

                                          • High precision vertical stages

                                            20 mm or 25 mm travel
                                            Passive, user adjustable magnetic counterbalance for payloads up to 16 N
                                            High repeatability (200 nm) and accuracy (1.5 µm), with 12 nm minimum incremental move
                                            Direct position measurement from 1 nm resolution linear encoder
                                            Up to 0.7 m/s speed and up to 2.5 g acceleration

                                          • VSR-E

                                          • Vertical lift stage with built-in motor encoders

                                            20 mm travel
                                            Up to 55 mm/s speed and up to 200 N thrust
                                            10 kg load capacity
                                            73 mm retracted height

                                          • VSR

                                          • Vertical lift stage

                                            20 mm or 40 mm travel
                                            20 mm or 40 mm of travel
                                            Up to 55 mm/s speed and up to 200 N thrust
                                            10 kg load capacity

                                        • Rotary Stages

                                            • Motorized with Built-in Controllers and Direct Reading Encoders

                                                • X-RST-DE Series

                                                • High precision motorized rotary stages with built-in controllers and direct encoders

                                                  Speed up to 24 �/s and torque up to 10 Nµm
                                                  Direct reading encoder for position correction; stage accuracy to 0.01�
                                                  50 kg centered load capacity
                                                  50.8 mm (2 inch) aperture with kinematic mounting options for repeatability of assembly

                                                • X-RST-AE Series

                                                • High precision motorized rotary stages with built-in controllers and direct encoders

                                                  Speed up to 60�/s and torque up to 70 Nµm
                                                  300 kg centered load capacity
                                                  101.6 mm (4") aperture
                                                  Direct reading encoder for position correction; stage accuracy to 0.008�

                                              • Motorized with Built-in Controllers and Motor Encoders

                                                  • X-RST-E Series

                                                  • High load motorized rotary stages with built-in controllers and motor encoders

                                                  • X-RSB-E系列

                                                  • 高。d motorized rotary stages with built-in controllers and motor encoders
                                                    Continuous 360� rotation stage
                                                    Speeds up to 300 rpm
                                                    50.8 mm aperture
                                                    Built-in controller; daisy-chains with other Zaber products
                                                    Multiple motor configurations
                                                    Encoder position feedback with slip/stall detection and automatic recovery

                                                  • X-RSW-E Series

                                                  • Motorized rotary stages with built-in controllers and motor encoders
                                                    Worm gear driven for continuous rotation
                                                    Two lens holders allow for use as a polarizer mount
                                                    Speed up to 75 rpm and torque up to 2.25 N⋅m
                                                    Encoder position feedback with slip/stall detection and automatic recovery
                                                    Built-in controller; daisy-chains with other Zaber products
                                                    Multiple X-Series products in a daisy-chain can share a single power supply
                                                    Custom versions available

                                                  • X-RSM-E Series

                                                  • Motorized rotation stages with built-in controllers and motor encoders
                                                    21 mm total height
                                                    0.02� repeatability
                                                    4 mm aperture
                                                    50 N load capacity
                                                    Worm gear driven for continuous rotation
                                                    Built-in controller; daisy-chains with other Zaber products
                                                    Encoder position feedback with slip/stall detection and automatic recovery

                                                • Motorized with Built-in Controllers

                                                    • X-RST Series

                                                    • High load motorized rotary stages with built-in controllers
                                                      50.8 mm (2 inch) aperture with kinematic mounting options for repeatability of assembly
                                                      50 kg centered load capacity
                                                      Speed up to 24 �/s and torque up to 10 N⋅m
                                                      Built-in controller; daisy-chains with other Zaber products
                                                      Multiple X-Series products in a daisy-chain can share a single power supply
                                                      Custom versions available

                                                    • X-RSB Series

                                                    • 高。d motorized rotary stages with built-in controllers
                                                      Continuous 360� rotation stage
                                                      Speeds up to 300 rpm
                                                      50.8 mm aperture
                                                      Built-in controller; daisy-chains with other Zaber products
                                                      Multiple motor configurations

                                                    • X-RSW Series

                                                    • Motorized rotary stages with built-in controllers
                                                      Worm gear driven for continuous rotation
                                                      Two lens holders allow for use as a polarizer mount
                                                      Speed up to 75 rpm and torque up to 2.25 N⋅m
                                                      20 kg centered load capacity
                                                      Built-in controller; daisy-chains with other Zaber products
                                                      Multiple X-Series products in a daisy-chain can share a single power supply
                                                      Custom versions available

                                                    • X-RSM Series

                                                    • Motorized rotary stages with built-in controllers
                                                      21 mm total height
                                                      0.02� repeatability
                                                      4 mm aperture
                                                      50 N load capacity
                                                      Worm gear driven for continuous rotation
                                                      Built-in controller; daisy-chains with other Zaber products

                                                  • Motorized with Built-in Direct Reading Encoders

                                                      • RST-DE Series

                                                      • High precision motorized rotation stages with built-in direct reading encoders
                                                        Direct reading encoder for position correction; stage accuracy to 0.01�
                                                        Continuous 360� rotation stage
                                                        50.8 mm (2 inch) aperture with kinematic mounting options for repeatability of assembly
                                                        50 kg centered load capacity
                                                        Speed up to 24 �/s and torque up to 10 N⋅m
                                                        Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                        Custom versions available

                                                      • X-RST-AE Series

                                                      • High precision motorized rotary stages with built-in controllers and direct encoders

                                                        Speed up to 60�/s and torque up to 70 Nµm
                                                        300 kg centered load capacity
                                                        101.6 mm (4") aperture
                                                        Direct reading encoder for position correction; stage accuracy to 0.008�

                                                    • 机动内置电机编码器

                                                        • RST-E Series

                                                        • High load motorized rotation stages with built-in motor encoders

                                                          Encoder position feedback with slip/stall detection and automatic recovery
                                                          Continuous 360� rotation stage
                                                          50.8 mm (2 inch) aperture with kinematic mounting options for repeatability of assembly
                                                          50 kg centered load capacity
                                                          Speed up to 24 �/s and torque up to 10 N⋅m
                                                          Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                          Custom versions available

                                                        • RSB-E Series

                                                        • 高。d motorized rotation stages with built-in motor encoders
                                                          Continuous 360� rotation stage
                                                          Speeds up to 300 rpm
                                                          50.8 mm aperture
                                                          Multiple motor configurations
                                                          Encoder position feedback with slip/stall detection and automatic recovery
                                                          Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                                                        • RSW-E Series

                                                        • Motorized rotation stages with built-in motor encoders
                                                          Worm gear driven for continuous rotation
                                                          Two lens holders allow for use as a polarizer mount
                                                          Speed up to 75 rpm and torque up to 225 N⋅cm
                                                          Encoder position feedback with slip/stall detection and automatic recovery
                                                          23 mm aperture
                                                          Designed for use with an X-MCB1 controller, or can be used with any 2-phase stepper motor controller
                                                          Custom versions available

                                                        • RSM-E Series

                                                        • Motorized rotation stages with built-in motor encoders
                                                          21 mm total height
                                                          0.02� repeatability
                                                          4 mm aperture
                                                          50 N load capacity
                                                          Worm gear driven for continuous rotation
                                                          Encoder position feedback with slip/stall detection and automatic recovery
                                                          Designed for use with a X-MCB1 controller or can be used with any 2-phase stepper motor controller

                                                      • Motorized

                                                          • RST系列

                                                          • High load motorized rotation stages
                                                            Continuous 360� rotation stage
                                                            50.8 mm (2 inch) aperture with kinematic mounting options for repeatability of assembly
                                                            50 kg centered load capacity
                                                            Speed up to 24 �/s and torque up to 10 N⋅m
                                                            Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                                                          • RSB Series

                                                          • 高。d motorized rotation stages
                                                            Continuous 360� rotation stage
                                                            Speeds up to 300 rpm
                                                            50.8 mm aperture
                                                            Multiple motor configurations
                                                            Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                                                          • RSW Series

                                                          • Motorized rotation stages
                                                            Worm gear driven for continuous rotation
                                                            Two lens holders allow for use as a polarizer mount
                                                            Speed up to 75 rpm and torque up to 225 N⋅cm
                                                            23 mm aperture
                                                            Designed for use with a X-MCB1 controller or can be used with any 2-phase stepper motor controller
                                                            Custom versions available

                                                          • RSM Series

                                                          • Motorized rotation stages
                                                            21 mm total height
                                                            0.02� repeatability
                                                            4 mm aperture
                                                            50 N load capacity
                                                            Worm gear driven for continuous rotation
                                                            Designed for use with a X-MCB1 controller or can be used with any 2-phase stepper motor controller

                                                        • Stepper Motors

                                                            • X-NMS-E Series

                                                            • Stepper motors with built-in controllers and motor encoders
                                                              NEMA 17 stepper motor with built-in controller
                                                              Up to 25,600 microsteps per revolution
                                                              每分钟2650转的速度和30 N⋅厘米扭矩
                                                              Home sensor and small magnet included, optional magnetic away sensor
                                                              Daisy-chains data and power with X-series products
                                                              Custom versions available

                                                            • X-NMS Series

                                                            • Stepper motors with built-in controllers
                                                              NEMA 17 stepper motor with built-in controller
                                                              Up to 25,600 microsteps per revolution
                                                              每分钟2650转的速度和30 N⋅厘米扭矩
                                                              Home sensor and small magnet included, optional magnetic away sensor
                                                              Daisy-chains data and power with X-series products
                                                              Custom versions available

                                                            • NMS Series

                                                            • Stepper motors

                                                              Standard NEMA frame stepper motors
                                                              NEMA size 08 to 23 stepper motors offer a range of size and torque
                                                              Up to 3000 rpm speed and 1.8 Nµm torque
                                                              HS02 home sensor and magnet included
                                                              Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper motor controller
                                                              With AutoDetect, the X-MCC controller configures its settings automatically for the connected peripheral

                                                            • NMS-E Series

                                                            • Stepper motors with encoders

                                                              NEMA size 08 to 23 stepper motors offer a range of size and torque
                                                              Up to 3000 rpm speed and 1.8 Nµm torque
                                                              HS02 home sensor and magnet included
                                                              Built-in encoders provide slip/stall detection and recovery
                                                              Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper motor controller
                                                              With AutoDetect, the X-MCC controller configures its settings automatically for the connected peripheral

                                                          • Optical Mounts

                                                              • X-FWR-E Series

                                                              • Motorized filter wheels with built-in controllers and motor encoders
                                                                Interchangeable filter holders for 25 mm optics (10 positions) or 32 mm optics (7 positions)
                                                                Smooth, high speed filter changes; Adjacent filter change time of 57 ms (10 position wheel)
                                                                Built-in controller; daisy-chains with other Zaber products
                                                                Mounting provided for optical cage systems and C-mount components

                                                              • T-MM Series

                                                              • Motorized mirror mounts with built-in controllers
                                                                Two-axis kinematic mount with +/-5� range
                                                                Repeatability down to 0.015�
                                                                Holds 2" (50 mm) optics; adaptors available for C-Mount, 1" (25 mm), and 1/2" (12.5 mm) optics
                                                                Built-in controller; daisy-chains data and power with other T-Series products

                                                            • Gimbal Stages

                                                                • X-G-RST-DE Series

                                                                • High precision motorized gimbals with built-in controllers and direct encoders

                                                                  360� continuous travel on both azimuth and elevation axes
                                                                  Speed up to 24�/s; max torque 10 Nµm; max payload 15 kg
                                                                  Direct reading encoder for slip/stall detection and position correction
                                                                  300 and 500 mm width frame options

                                                                • X-GSM-E Series

                                                                • High load motorized gimbals with built-in controllers and motor encoders

                                                                  360� continuous travel on both azimuth and elevation axes
                                                                  Speed up to 24�/s; max torque 10 Nµm; max payload 15 kg
                                                                  Encoder position feedback with slip/stall detection and automatic recovery
                                                                  300 and 500 mm width frame options

                                                              • Goniometers

                                                                  • X-GSM-E Series

                                                                  • Motorized goniometers with built-in controllers and motor encoders
                                                                    40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                    30 N load capacity
                                                                    Low profile, small footprint
                                                                    Built-in controller; daisy-chains with other Zaber products
                                                                    Encoder position feedback with slip/stall detection and automatic recovery

                                                                  • X-GSM Series

                                                                  • Motorized goniometers with built-in controllers
                                                                    40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                    30 N load capacity
                                                                    Low profile, small footprint
                                                                    Built-in controller; daisy-chains with other Zaber products

                                                                  • GSM Series

                                                                  • Motorized goniometers
                                                                    40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                    30 N load capacity
                                                                    Low profile, small footprint
                                                                    Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                                                                  • GSM-E Series

                                                                  • Motorized goniometers with built-in motor encoders
                                                                    40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                    30 N load capacity
                                                                    Low profile, small footprint
                                                                    Encoder position feedback with slip/stall detection and automatic recovery
                                                                    Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                                                                • Grippers

                                                                    • X-GLP-E Series

                                                                    • Parallel grippers with built-in motor encoders and controllers
                                                                      40 mm travel
                                                                      Grips and measures different sized objects without programming
                                                                      Position feedback from motor encoder
                                                                      Maintains grip even if power is lost
                                                                      Built-in controller
                                                                      Daisy-chains with other X-Series products to share a single power supply
                                                                      Includes removable finger blanks

                                                                    • GLP-E Series

                                                                    • Parallel grippers with motor encoders
                                                                      40 mm travel
                                                                      Measures size of gripped part with motor encoder
                                                                      Maintains grip even if power is lost
                                                                      Includes removable finger blanks
                                                                      Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                                                                  • Vacuum Devices

                                                                      • High Vacuum Devices with Built-in Controllers

                                                                          • X-LRQ-SV2 Series

                                                                          • High vacuum motorized linear stages with built-in controllers
                                                                            Vacuum compatible to 10-6 Torr
                                                                            75, 150, 300, 450, 600 mm travel
                                                                            100 kg load capacity
                                                                            Up to 205 mm/s speed and up to 100 N thrust
                                                                            Built-in controller; daisy-chains with other Zaber products
                                                                            Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                            Custom versions available

                                                                          • X-LSM-SV2 Series

                                                                          • High vacuum miniature motorized linear stages with built-in controllers
                                                                            Vacuum compatible to 10-6 Torr
                                                                            25, 50, 100, 150, 200 mm travel
                                                                            10 kg load capacity
                                                                            Up to 100 mm/s speed and up to 35 N thrust
                                                                            Built-in controller; daisy-chains with other Zaber products
                                                                            Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                            Custom versions available

                                                                          • X-VSR-SV2 Series

                                                                          • 高真空垂直阶段with built-in controllers
                                                                            Vacuum compatible to 10-6 Torr
                                                                            20 mm or 40 mm travel
                                                                            Up to 48 mm/s speed and up to 200 N thrust
                                                                            10 kg load capacity
                                                                            55 or 85 mm retracted height
                                                                            Built-in controller; daisy-chains with other Zaber products
                                                                            Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)

                                                                          • X-RSW-SV2 Series

                                                                          • High vacuum motorized rotary stages with built-in controllers
                                                                            Vacuum compatible to 10-6 Torr
                                                                            Worm gear driven for continuous rotation
                                                                            20 kg load capacity
                                                                            Speed up to 100 �/s and torque up to 100 N⋅cm
                                                                            Integrated stepper motor controller and motor driver allows for easy-to-use control
                                                                            Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)

                                                                          • X-RSM-SV2 Series

                                                                          • High vacuum light load rotary stages with built-in controllers

                                                                            Vacuum compatible to 10-6 Torr
                                                                            21 mm total height
                                                                            0.02� repeatability
                                                                            4 mm aperture
                                                                            Worm gear driven for continuous rotation
                                                                            Integrated stepper motor controller and motor driver allows for easy-to-use control
                                                                            Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)

                                                                          • X-GSM-SV2 Series

                                                                          • High vacuum motorized goniometers with built-in controllers
                                                                            Vacuum compatible to 10-6 Torr
                                                                            40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                            Built-in controller; daisy-chains with other Zaber products
                                                                            Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)

                                                                          • X-NA-SV2 Series

                                                                          • High vacuum micro linear actuators with built-in controllers

                                                                            Vacuum compatible to 10-6 Torr
                                                                            25 and 50 mm travel
                                                                            Up to 30 mm/s speed and up to 25 N thrust
                                                                            Our most compact, precise and robust actuator

                                                                        • High Vacuum Devices with Stand-alone Controllers

                                                                            • LRQ-V2 Series

                                                                            • High vacuum motorized linear stages
                                                                              Vacuum compatible to 10-6 Torr
                                                                              75, 150, 300, 450, 600 mm travel
                                                                              100 kg load capacity
                                                                              Up to 205 mm/s speed and up to 100 N thrust
                                                                              Only 7 feedthrough wires required to control these units
                                                                              Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                                                                            • LSM-V2 Series

                                                                            • High vacuum miniature motorized linear stages

                                                                              Vacuum compatible to 10-6 Torr
                                                                              25, 50, 100, 150, 200 mm travel
                                                                              10 kg load capacity
                                                                              Up to 100 mm/s speed and up to 35 N thrust
                                                                              Only 7 feedthrough wires required to control these units
                                                                              Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                              Custom versions available

                                                                            • GSM-V2 Series

                                                                            • High vacuum motorized goniometers
                                                                              Vacuum compatible to 10-6 Torr
                                                                              40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                              Only 7 feedthrough wires required to control these units
                                                                              Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                                                                            • VSR-V2 Series

                                                                            • 高真空垂直阶段
                                                                              Vacuum compatible to 10-6 Torr
                                                                              20 mm or 40 mm travel
                                                                              Up to 48 mm/s speed and up to 200 N thrust
                                                                              10 kg load capacity
                                                                              55 or 85 mm retracted height
                                                                              Only 7 feedthrough wires required to control these units
                                                                              Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                                                                            • RSW-V2 Series

                                                                            • High vacuum motorized rotary stages
                                                                              Vacuum compatible to 10-6 Torr
                                                                              Worm gear driven for continuous rotation
                                                                              20 kg load capacity
                                                                              Speed up to 100 �/s and torque up to 100 N⋅cm
                                                                              Only 7 feedthrough wires required to control these units
                                                                              Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                                                                            • RSM-V2 Series

                                                                            • High vacuum light load rotary stages
                                                                              Vacuum compatible to 10-6 Torr
                                                                              21 mm total height
                                                                              0.02� repeatability
                                                                              4 mm aperture
                                                                              Worm gear driven for continuous rotation
                                                                              Only 7 feedthrough wires required to control these units
                                                                              Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                                                                          • Low Vacuum Devices with Built-in Controllers

                                                                              • X-LRQ-SV1 Series

                                                                              • Low vacuum motorized linear stages with built-in controllers
                                                                                Vacuum compatible to 10-3 Torr
                                                                                75, 150, 300, 450, 600 mm travel
                                                                                100 kg load capacity
                                                                                Up to 205 mm/s speed and up to 100 N thrust
                                                                                Built-in controller; daisy-chains with other Zaber products
                                                                                Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                                Custom versions available

                                                                              • X-LSM-SV1 Series

                                                                              • Low vacuum miniature motorized linear stages with built-in controllers
                                                                                Vacuum compatible to 10-3 Torr
                                                                                25, 50, 100, 150, 200 mm travel
                                                                                10 kg load capacity
                                                                                Up to 100 mm/s speed and up to 35 N thrust
                                                                                Built-in controller; daisy-chains with other Zaber products
                                                                                Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                                Custom versions available

                                                                              • X-VSR-SV1 Series

                                                                              • Low vacuum vertical stages with built-in controllers
                                                                                Vacuum compatible to 10-3 Torr
                                                                                20 mm or 40 mm travel
                                                                                Up to 48 mm/s speed and up to 200 N thrust
                                                                                10 kg load capacity
                                                                                55 or 85 mm retracted height
                                                                                Built-in controller; daisy-chains with other Zaber products
                                                                                Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)

                                                                              • X-RSW-SV1 Series

                                                                              • Low vacuum motorized rotary stages with built-in controllers
                                                                                Vacuum compatible to 10-3 Torr
                                                                                Worm gear driven for continuous rotation
                                                                                20 kg load capacity
                                                                                Speed up to 100 �/s and torque up to 100 N⋅cm
                                                                                Integrated stepper motor controller and motor driver allows for easy-to-use control
                                                                                Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)

                                                                              • X-RSM-SV1 Series

                                                                              • Low vacuum light load rotary stages with built-in controllers
                                                                                Vacuum compatible to 10-3 Torr
                                                                                21 mm total height
                                                                                0.02� repeatability
                                                                                4 mm aperture
                                                                                Worm gear driven for continuous rotation
                                                                                Integrated stepper motor controller and motor driver allows for easy-to-use control
                                                                                Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)

                                                                              • X-GSM-SV1 Series

                                                                              • Low vacuum motorized goniometers with built-in controllers

                                                                                Vacuum compatible to 10-3 Torr
                                                                                40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                                Built-in controller; daisy-chains with other Zaber products
                                                                                Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)

                                                                              • X-NA-SV1

                                                                              • Low vacuum micro linear actuators with built-in controllers

                                                                                Vacuum compatible to 10-3 Torr
                                                                                25 and 50 mm travel
                                                                                Up to 30 mm/s speed and up to 25 N thrust
                                                                                Hardened ball-tip (removable so you can use the built-in threaded tip or a flat tip))

                                                                            • Low Vacuum Devices with Stand-alone Controllers

                                                                                • LRQ-V1 Series

                                                                                • Low vacuum motorized linear stages
                                                                                  Vacuum compatible to 10-3 Torr
                                                                                  75, 150, 300, 450, 600 mm travel
                                                                                  100 kg load capacity
                                                                                  Up to 205 mm/s speed and up to 100 N thrust
                                                                                  Only 7 feedthrough wires required to control these units
                                                                                  Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                                                                                • LSM-V1 Series

                                                                                • Low vacuum miniature motorized linear stages
                                                                                  Vacuum compatible to 10-3 Torr
                                                                                  25, 50, 100, 150, 200 mm travel
                                                                                  10 kg load capacity
                                                                                  Up to 100 mm/s speed and up to 35 N thrust
                                                                                  Only 7 feedthrough wires required to control these units
                                                                                  Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                                  Custom versions available

                                                                                • LSA-V1 Series

                                                                                • Low vacuum micro motorized linear stages
                                                                                  Vacuum compatible to 10-3 Torr
                                                                                  10 or 25 mm travel
                                                                                  Up to 10 mm/s speed and up to 35 N thrust
                                                                                  Fits into the most restrictive spaces
                                                                                  Mounts directly in XY (requires AB106 angle bracket for Z axis/vertical mounting)
                                                                                  Only 7 feedthrough wires required to control these units
                                                                                  Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                                                                                • VSR-V1 Series

                                                                                • Low vacuum vertical stages
                                                                                  Vacuum compatible to 10-3 Torr
                                                                                  20 mm or 40 mm travel
                                                                                  Up to 48 mm/s speed and up to 200 N thrust
                                                                                  10 kg load capacity
                                                                                  55 or 85 mm retracted height
                                                                                  Only 7 feedthrough wires required to control these units
                                                                                  Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                                                                                • RSW-V1 Series

                                                                                • Low vacuum motorized rotary stages
                                                                                  Vacuum compatible to 10-3 Torr
                                                                                  Worm gear driven for continuous rotation
                                                                                  20 kg load capacity
                                                                                  Speed up to 100 �/s and torque up to 100 N⋅cm
                                                                                  Only 7 feedthrough wires required to control these units
                                                                                  Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                                                                                • RSM-V1 Series

                                                                                • Low vacuum light load rotary stages
                                                                                  Vacuum compatible to 10-3 Torr
                                                                                  21 mm total height
                                                                                  0.02� repeatability
                                                                                  4 mm aperture
                                                                                  Worm gear driven for continuous rotation
                                                                                  Only 7 feedthrough wires required to control these units
                                                                                  Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                                                                                • GSM-V1 Series

                                                                                • Low vacuum motorized goniometers
                                                                                  Vacuum compatible to 10-3 Torr
                                                                                  40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                                  Only 7 feedthrough wires required to control these units
                                                                                  Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller

                                                                              • Non-motorized

                                                                                    • TSB-V Series

                                                                                    • Low vacuum translation stages
                                                                                      Vacuum compatible to 10-3 Torr
                                                                                      28 and 60 mm travel
                                                                                      10 kg load capacity
                                                                                      Requires a T-NA-SV1 actuator to drive it

                                                                                • Micromanipulators

                                                                                      • M-LSM Series

                                                                                      • Motorized micromanipulators
                                                                                        Adjustable probe holder
                                                                                        Up to 14 mm/s speed and 15 N thrust
                                                                                        Plug and play controllers and Joystick included
                                                                                        25 mm travel XYZ with resolution finer than 0.05 µm
                                                                                        Programmable or joystick-activated 4th virtual axis to allow approach along probe angle

                                                                                  • XY, XYZ & Gantry Systems

                                                                                      • XY Series

                                                                                      • Two-axis stages with built-in controllers13 mm up to 1000 mm travel per axis
                                                                                        Built-in controllers
                                                                                        Several units daisy-chain to a single serial port
                                                                                        Machinist's Square (SQ3) included free with all XY and XYZ systems
                                                                                        Available in various speed / resolution options
                                                                                        Custom versions available

                                                                                      • XYZ Series

                                                                                      • Three-axis stages with built-in controllers
                                                                                        13 mm up to 450 mm travel per axis
                                                                                        Built-in controllers
                                                                                        Several units daisy-chain to a single serial port
                                                                                        Machinist's Square (SQ3) included free with all XY and XYZ systems
                                                                                        Available in various speed / resolution options
                                                                                        Custom versions available

                                                                                      • GANTRY Series

                                                                                      • XY and XYZ Gantry Systems and Kits

                                                                                        User configurable; select from a wide variety of linear stage options to design the XY or XYZ gantry system that best suits your application requirements
                                                                                        LSQ-E Linear Stages: 150 to 600 mm travel; up to 30 kg max payload
                                                                                        LRT-EC Linear Stages: 500 to 1500 mm travel; up to 100 kg max payload
                                                                                        LC40 Linear Stages: 100 to 3500 mm travel; up to 50 kg max payload
                                                                                        Included X-MCC controller for up to three axes of coordinated motion, including tandem X-axis stages driven in parallel with lockstep synchronization to provide a superior stiffness and positional control
                                                                                        Multiple options for risers, stage orientations, cable guides, or optional Z/theta axes

                                                                                    • Automated Microscopes

                                                                                        • MVR Series

                                                                                        • Motorized inverted microscopes

                                                                                          Motorized XY movement, focus, and filter cube changes allow fully automated whole slide imaging and well plate scanning
                                                                                          Linear motor focus stage provides 20 nm minimum incremental move, 200 nm repeatability and zero backlash
                                                                                          Available with XY stage travel up to 305 mm
                                                                                          6-position motorized filter cube turret (X-FCR) accepts Zeiss �push & click� style filter cubes
                                                                                          Innovative quick-change objective system allows the objective to be changed in seconds and supports any objective thread

                                                                                        • X-LCA4 Serie

                                                                                        • 4-channel LED controllers

                                                                                          LED functions can be controlled via Zaber console or µmanager open source microscopy software
                                                                                          Drives 4 LEDs at up to 3 A per LED with extremely stable output
                                                                                          Each LED channel can be controlled independently through a USB connection that can be daisy chained with any Zaber X-Series devices

                                                                                        • X-FCR Series

                                                                                        • Motorized filter cube turrets

                                                                                          Holds up to 6 Zeiss push & click type filter cubes
                                                                                          Motorized turret with built-in controller allows filter cube changes in 350 ms
                                                                                          Daisy-chains with other Zaber devices for control through a single USB connection

                                                                                        • MKR Series

                                                                                        • Microscope cores

                                                                                          Modular microscope core includes X-FCR motorized filter cube turret and X-LDA linear motor focus stage Innovative quick-change objective system allows the objective to be changed in seconds and supports any objective thread Filter cube turret accepts six Zeiss "push & click" style filter cubes

                                                                                        • MLR Series

                                                                                        • Microscope reflected light illuminators

                                                                                          3 LED lamp channels, with customizable lamp combinations
                                                                                          Provides excitation for common fluorophores including DAPI, GFP, Cy3, FITC, TRITC, TxRed, Cy5 (MLR3B)

                                                                                        • MLT Series

                                                                                        • Microscope transmitted light illuminators

                                                                                          Single high intensity white LED lamp provides broad spectrum illumination
                                                                                          Includes long working distance condenser with adjustable aperture stop
                                                                                          Allows brightfield and phase contrast observation modes

                                                                                      • Motorized Microscope Stages

                                                                                          • X-ADR-AE Series

                                                                                          • Linear motor XY microscope stages with built-in controllers and linear encoders

                                                                                            130 x 100 mm or 250 x 100 mm travel options
                                                                                            1 nm resolution linear encoders provide 5 µm accuracy, 500 nm repeatability, and 50 nm minimum incremental move Ultra quiet linear motors provide 750 mm/s top speed and are maintenance free

                                                                                          • X-ASR-E Series

                                                                                          • Motorized XY microscope stages with built-in controllers and motor encoders

                                                                                            50 mm up to 305 mm travel per axis
                                                                                            Up to 12 µm accuracy; 2 µm repeatability; 85 mm/s speed
                                                                                            Easily adjustable non-contact hall sensor limit switches
                                                                                            Supported by µmanager and MetaMorph� Microscopy Automation & Image Analysis Software

                                                                                          • X-ASR Series

                                                                                          • Motorized XY microscope stages with built-in controllers

                                                                                            50 mm up to 305 mm travel per axis
                                                                                            Up to 12 µm accuracy; 2 µm repeatability; 85 mm/s speed
                                                                                            Easily adjustable non-contact hall sensor limit switches
                                                                                            Supported by µmanager and MetaMorph� Microscopy Automation & Image Analysis Software

                                                                                          • ASR-E Series

                                                                                          • Closed-loop motorized XY scanning stages with built-in motor encoders

                                                                                            50 mm up to 305 mm travel per axis
                                                                                            Easily adjustable non-contact hall sensor limit switches
                                                                                            Up to 12 µm accuracy; 2 µm repeatability; 85 mm/s speed
                                                                                            Supported by µmanager and MetaMorph® Microscopy Automation & Image Analysis Software
                                                                                            Custom versions available

                                                                                          • ASR Series

                                                                                          • Motorized XY microscope stages

                                                                                            50 mm up to 305 mm travel per axis
                                                                                            Easily adjustable non-contact hall sensor limit switches
                                                                                            Up to 12 µm accuracy; 2 µm repeatability; 85 mm/s speed
                                                                                            Supported by µmanager and MetaMorph® Microscopy Automation & Image Analysis Software
                                                                                            Custom versions available

                                                                                        • Controllers & Joysticks

                                                                                            • X-MCC Series

                                                                                            • Multi-axis universal motor controllers

                                                                                              Universal drive allows control of 1, 2, 3, or 4 axes, including bipolar stepper motors, linear motors, or voice coil motors with up to 6 Arms (10 A peak) per phase
                                                                                              Allows different control modes, including independent axis control with trapezoidal velocity profiles or interpolated multi-axis control with line, arc, or circle primitives
                                                                                              Uses AutoDetect to identify and configure attached Zaber AutoDetect peripherals
                                                                                              高。d single-ended quadrature encoder input and 3 limit switch inputs per axis
                                                                                              4 isolated digital inputs, 4 isolated digital outputs, 4 analog inputs, and 1 analog output
                                                                                              Multiple communications options: RS-232 and USB

                                                                                            • X-MCA Series

                                                                                            • Stepper Motor Controllers

                                                                                              Controls any bipolar stepper motor or actuator with high resolution using an integrated 1.0 Arms (1.4 A peak) per phase driver with customizable micro-stepping
                                                                                              Intuitive ASCII protocol simplifies complex automation tasks
                                                                                              Designed for easy mounting to panels, breadboards, lab benches, DIN rails and enclosures
                                                                                              Support linear and motor encoders for closed-loop control

                                                                                            • X-JOY3 Series

                                                                                            • Programmable 3-axis joystick

                                                                                              Controls up to three axes, each with programmable sensitivity and velocity profile
                                                                                              Compact bench-top design for manual control with or without a computer
                                                                                              Eight programmable keys for functions like storing and recalling positions
                                                                                              Intuitive ASCII protocol simplifies complex automation tasks
                                                                                              Custom versions available
                                                                                              Technical Article - Manual Control Using a Joystick