获取广泛的自主移动机器人组合s (AMRs) provides companies with end-to-end picking solutions in fulfillment and distribution centers, just-in-time material delivery solutions in manufacturing facilities, and automation of manual material movement in any facility.
Visit us on:
Preparing to operate with fewer people has forced manufacturers to embrace many of the values of lean manufacturing including removing non-value added activities, establishing pull within the manufacturing process, and creating flow between steps of the manufacturing process. This enables manufacturers to remove some of the wastes of lean manufacturing including wastes in transportation, motion, waiting, and skills.
AMRs can automate transport of work-in-progress materials between production lines or work cells, including sub-assemblies produced in various production stages. As products progress in the assembly process they can be transported to testing and quality control areas, with any defects being sent to repair or back to the line by AMRs as well. Finished goods can be transported to packout, and then on to storage or directly to shipping. AMRs can also support the on-demand replenishment of floorstock materials and transport waste materials out of the production areas to ensure staging areas are free and clear of trash and recyclables.
FetchCart are simple, flexible, rolling warehouse carts that can be used with or without CartConnect robots.
FetchCarts feature adjustable middle shelves to support various bins, totes, and boxes in each picking and batch picking applications, as well as replenishment and manufacturing work-in-progress material movement.
Get up and running in just hours and modify workflows on-demand with FetchCore, our enterprise cloud-based software. Track, analyze, and optimize robot performance with detailed metrics as well as annotate, update, and share your facility maps all from the same portal.
Included with the FetchCore software suite is the WorkFlow Builder app, which allows you to program complex robot tasks by dragging and dropping graphical blocks. These block represent a variety of robot actions, such as moving to multiple locations, picking up or dropping off carts, or initiating a workflow when a trigger is activated by the user. WorkFlow Builder allow you to create and change workflows from anywhere with just a few clicks, with no programming required.
Collaborative, autonomous mobile robots were designed to work around people, and safety should not be compromised at the expense of efficiency.
All Fetch Robotics AMRs comes equipped with some of the most advanced safety features in the industry. 2D LiDAR scanners with 25m range enable mapping, localization, obstacle avoidance, as well as object detection. Multiple 3D depth cameras allow for superior robot vision to avoid both ground-based and overhanging dynamic obstacles, including forklifts, pallet jacks, and people.
When these sensors are combined with our onboard safety software, the result is the first industrial AMR systems, (inclusive of both the robot base and top module) that conform to both the newly released ANSI / RIA R15.08 safety standard for mobile robots as well as as CE mark requirements.
Get up and running in just hours and modify workflows on-demand with FetchCore, our enterprise cloud-based software. Track, analyze, and optimize robot performance with detailed metrics as well as annotate, update, and share your facility maps all from the same portal.
Included with the FetchCore software suite is the WorkFlow Builder app, which allows you to program complex robot tasks by dragging and dropping graphical blocks. These block represent a variety of robot actions, such as moving to multiple locations, picking up or dropping off carts, or initiating a workflow when a trigger is activated by the user. WorkFlow Builder allow you to create and change workflows from anywhere with just a few clicks, with no programming required.
Coordinating activity between your workforce, facility, and robots has never been easier. Start automating right out of the box and create customized tasks with FetchCore WorkFlow Builder.
Quickly setup handheld devices such as scanners, tablets, and even smartphones to initiate robot workflows from anywhere in your facility.
Robots can also communicate with motor conveyor lines and ASRSs, as well as proximity, pressure, photo-electric and other various sensors to automatically initiate workflows.
For complete human and robot orchestration, FetchCore can be fully integrated with your WMS, WES, or MES to optimize your resources for maximum efficiency.
Get up and running in just hours and modify workflows on-demand with FetchCore, our enterprise cloud-based software. Track, analyze, and optimize robot performance with detailed metrics as well as annotate, update, and share your facility maps all from the same portal.
Included with the FetchCore software suite is the WorkFlow Builder app, which allows you to program complex robot tasks by dragging and dropping graphical blocks. These block represent a variety of robot actions, such as moving to multiple locations, picking up or dropping off carts, or initiating a workflow when a trigger is activated by the user. WorkFlow Builder allow you to create and change workflows from anywhere with just a few clicks, with no programming required.
Collaborative, autonomous mobile robots were designed to work around people, and safety should not be compromised at the expense of efficiency.
All Fetch Robotics AMRs comes equipped with some of the most advanced safety features in the industry. 2D LiDAR scanners with 25m range enable mapping, localization, obstacle avoidance, as well as object detection. Multiple 3D depth cameras allow for superior robot vision to avoid both ground-based and overhanging dynamic obstacles, including forklifts, pallet jacks, and people.
When these sensors are combined with our onboard safety software, the result is the first industrial AMR systems, (inclusive of both the robot base and top module) that conform to both the newly released ANSI / RIA R15.08 safety standard for mobile robots as well as as CE mark requirements.
Conveyor systems have dramatically increased industrial efficiency for years; however, these fixed assets are hard to adapt to today’s ever-changing material transport requirements. The Fetch RollerTop solution brings adaptability and increases automation in conveyor driven environments. With adjustable height and autonomous navigation, the RollerTops can pilot their way to conveyor and/or ASRS ends to load and unload totes and bins, so your employees can work on tasks that need human decision making instead of loading and unloading manually.
FetchCore has native support for the SICK TDC Gateway, which enables coordination of conveyor-to-conveyor handoffs.
可选生病TDC(单独出售)及rked industrial I/O device that serves as a bridge between the Fetch Cloud Robotics Platform and other industrial equipment such as conveyors, doors, and air showers. Automate hand-offs between RollerTop robots and active powered conveyors by connecting a TDC to any conveyor controller.
Autonomous docking
Precision markers and our Precision Alignment feature in FetchCore guarantee repeatable millimeter-level precision for reliable conveyor-to-conveyor interactions.
Get up and running in just hours and modify workflows on-demand with FetchCore, our enterprise cloud-based software. Track, analyze, and optimize robot performance with detailed metrics as well as annotate, update, and share your facility maps all from the same portal.
Included with the FetchCore software suite is the WorkFlow Builder app, which allows you to program complex robot tasks by dragging and dropping graphical blocks. These block represent a variety of robot actions, such as moving to multiple locations, picking up or dropping off carts, or initiating a workflow when a trigger is activated by the user. WorkFlow Builder allow you to create and change workflows from anywhere with just a few clicks, with no programming required.
生病的远程信息处理数据收集器(该俱乐部nal, sold separately) is a networked industrial I/O device that serves as a bridge between the FetchCore and other industrial equipment such as conveyors, doors, and air showers. Automate hand-offs between Fetch RollerTop robots and active powered conveyors by connecting a SICK TDC to any conveyor controller.
Coordinating activity between your workforce, facility, and robots has never been easier. Start automating right out of the box and create customized tasks with FetchCore WorkFlow Builder. Quickly setup handheld devices such as scanners, tablets, and even smartphones to initiate robot workflows from anywhere in your facility.
Robots can also communicate with motor conveyor lines and ASRSs, as well as proximity, pressure, photo-electric and other various sensors to automatically initiate workflows.
For complete human and robot orchestration, FetchCore can be fully integrated with your WMS, WES, or MES to optimize your resources for maximum efficiency.