Videos
Loading the player ...
- Offer Profile
- PROTECTING YOUR PRODUCTS … AN EASY GAME
We produce wrapping machines, thermo-shrinking ovens, sealers and case formers, strapping machines … but we also care for the environment. That’s why we also sell baling presses for cardboard, paper, plastinc, etc.
Closing the cycle.
Product Portfolio
Packaging
- Full range of mono- and multi-chamber baling presses for cardboard, paper, film, PET, aluminium, Tetrapak, cans and other products, bricketting presses for EPS, semi-automatic and fully automatic industrial compactors.
Packaging Lines
- We manufacture end of line packaging systems, from simple and manual to the most complex automated ones. We work closely with our customer to find the most suitable solutions for pallet wrapping of their products, including transport lines, weighing systems, top-lay waterproofing systems, strap application on pallets, handling of pallets loads.
-
Wrap even your most delicate products with stretch film
-
- Wrap with special stretch film even your most delicate products such as plants and flowers. Prepare your trolleys for transport, secured with a perfect wrapping.
-
Weight and Label
-
- Automatic packaging line including a carton sealer, 2 strapping automatic strapping machines, weighing system and label printing.
Roll conveyors controlled by photocells.
-
Form, seal, strap …
-
- Automatic packaging line. Case former, case sealer, side seal strapping machine.
Roll conveyors controlled by photocells.
-
Automatic Packaging Line with Rotax S5300
-
-
- Standard pallet dimensions 1200Ã1200 mm
- Motorized film pre-stretch with 1 or 2 motors
- Separate programming of top and bottom reinforcement wraps
- 托盘高度检测到光电管-标准h = 2100 mm; on request up to 3000 mm
- Arm rotation regulated by inverter from 4 to 15 rpm
- Sensor controlled rotation stop
- Variable speed of film carrier completely customizable
- Film carrier fall protection system
- Working cycles controlled by PLC Siemens S7-1200 and control panel KTP700
- Control panel with 10 password protected working cycles
- All motors controlled by inverter
- Tension 400V-50Hz
- Automatic cut system
-
Automatic Packaging Line with Spinny S2300
-
- Automatic packaging line with rotating table wrapping machine and automatic top sheet dispenser. Motorized pre-stretch.
- Pallet height detected by photocell
- Motorized film pre-stretch with 1 or 2 motors
- Variable speed of film carrier completely customizable
- Working cycles controlled by PLC Siemens S7-1200 and control panel KTP700
- 10 customizable working cycles
- All motors controlled by inverter
- Pallet dimensions 1200Ã1200 mm h=2400 mm
- Load capacity 2000 kg
- Tension 400V-50Hz
- Automatic film cut system
Wrapping Machines with Rotating Table
- Fully automatic or semi-automatic wrapping machines with rotating table, suitable for any packaging requirement.
Wrapping machines with rotating table represent a particular type of packaging machine. They are equipped with a platform on which the pallet is positioned which, rotating, allows the stretch film to wrap the entire pallet according to different work programs selectable by the control panel.
-
Semi-automatic Wrapping Machine with Rotating Table Facile
-
- Standard wrapping machine for pallet 800Ã1200 mm H=2100 mm
- Forklifting rotating table ø 1500 mm capacity 1200 kg
- Wrapping height detected by photocell
- Variable rotating speed from 6 to 12 rpm with gradual rotation start/stop
- Variable carriage speed from 3 to 5 m/min.
- Independent top and bottom reinforcement wraps
- Hinged column for transport
- Model zero.1 — Film carriage with mechanical brake for film tensioning
- Model zero.3 — Film carriage with electromagnetic brake for film tensioning
- Film carriage with motorized pre-stretch with ratio 100% – 150% – 200%
-
Semi-automatic Wrapping Machine Spinny S140 Plus / Advanced
-
- Semi-automatic wrapping machine with mechanical or electromagnetic film tensioning
- Mechanical brake (mod. PLUS) or electromagnetic brake (mod. ADVANCED) film tensioning
- Rotating table diameter 1500 mm load 1200 kg
- Distance between column and rotating table 500 mm
- Wrapping height up to 2100 mm detected by photocell
- Separate programming of top and bottom reinforcement wraps
- Table rotation regulated by variable frequency drive from 5 to 10 rpm
- Sensor controlled rotation stop
- Variable speed of film carrier completely customizable
- Independent top and bottom turns
- Film carrier fall protection system
- Electronic control panel with simple wrapping cycle, double wrapping cycle with top sheet, manual wrapping cycle
- Manual film carrier stop for reinforcement wrapping turns.
- Tension 230V-50Hz
-
Semi-automatic Wrapping Machine Spinny S140-TP Plus / Advanced
-
- Semi-automatic wrapping machine with mechanical or electromagnetic brake
- Rotating table diameter 1650 mm load 2000 kg
- Mechanical brake (mod. PLUS) or electromagnetic brake (mod. ADVANCED) film tensioning
- Distance between column and rotating table 500 mm
- Wrapping height up to 2100 mm detected by photocell
- Separate programming of top and bottom reinforcement wraps
- Table rotation regulated by variable frequency drive from 5 to 10 rpm
- Sensor controlled rotation stop
- Variable speed of film carrier completely customizable
- Independent top and bottom turns
- Film carrier fall protection system
- Electronic control panel with simple wrapping cycle, double wrapping cycle with top sheet, manual wrapping cycle
- Manual film carrier stop for reinforcement wrapping turns.
- Tension 230V-50Hz
-
Semi-automatic Wrapping Machine Spinny S200
-
- Semi-automatic wrapping machine with electromagnetic tensioning
- Rotating table diameter 1500 mm load 1200 kg
- Distance between column and rotating table 500 mm
- Wrapping height up to 2100 mm detected by photocell
- Separate programming of top and bottom reinforcement wraps
- Table rotation regulated by variable frequency drive from 5 to 10 rpm
- Sensor controlled rotation stop
- Variable speed of film carrier completely customizable
- Independent top and bottom turns
- Film carrier fall protection system
- Electronic control panel with 10 password protected working cycles
- Manual film carrier stop for reinforcement wrapping turns.
- Tension 230V-50Hz
-
半自动包装机灌木林S200-TP
-
- Semi-automatic wrapping machine with electromagnetic film tensioning
- Rotating table diameter 1650 mm load 2000 kg
- Electromagnetic brake film tensioning
- Distance between column and rotating table 500 mm
- Wrapping height up to 2100 mm detected by photocell
- Separate programming of top and bottom reinforcement wraps
- Table rotation regulated by variable frequency drive from 5 to 10 rpm
- Sensor controlled rotation stop
- Variable speed of film carrier completely customizable
- Independent top and bottom turns
- Film carrier fall protection system
- Electronic control panel with 10 password protected working cycles
- Manual film carrier stop for reinforcement wrapping turns.
- Tension 230V-50Hz
-
Semi-automatic Wrapping Machine Spinny S250
-
- Semi-automatic wrapping machine with pre-stretch (mechanical)
- Rotating table diameter 1500 mm load 1200 kg
- Mechanical pre-stretch film tensioning
- Distance between column and rotating table 500 mm
- Wrapping height up to 2100 mm detected by photocell
- Separate programming of top and bottom reinforcement wraps
- Table rotation regulated by variable frequency drive from 4 to 12 rpm
- Sensor controlled rotation stop
- Variable speed of film carrier completely customizable
- Independent top and bottom turns
- Film carrier fall protection system
- Electronic control panel with 10 password protected working cycles
- Manual film carrier stop for reinforcement wrapping turns.
- Tension 230V-50Hz
-
Semi-automatic Wrapping Machine Spinny S250-TP
-
- Semi-automatic wrapping machine with pre-stretch (mechanical)
- Rotating table diameter 1650 mm load 2000 kg
- Mechanical pre-stretch film tensioning
- Distance between column and rotating table 500 mm
- Wrapping height up to 2100 mm detected by photocell
- Separate programming of top and bottom reinforcement wraps
- Table rotation regulated by variable frequency drive from 4 to 12 rpm
- Sensor controlled rotation stop
- Variable speed of film carrier completely customizable
- Independent top and bottom turns
- Film carrier fall protection system
- Electronic control panel with 10 password protected working cycles
- Manual film carrier stop for reinforcement wrapping turns.
- Tension 230V-50Hz
-
Semi-automatic Wrapping Machine Spinny S300
-
- Semi-automatic wrapping machine with pre-stretch (motorized)
- Rotating table diameter 1500 mm load 1200 kg
- Motorized pre-stretch with 1 or 2 motors for film tensioning
- Distance between column and rotating table 500 mm
- Wrapping height up to 2100 mm detected by photocell
- Separate programming of top and bottom reinforcement wraps
- Table rotation regulated by variable frequency drive from 5 to 10 rpm
- Sensor controlled rotation stop
- Variable speed of film carrier completely customizable
- Independent top and bottom turns
- Film carrier fall protection system
- Electronic control panel with 10 password protected working cycles
- Manual film carrier stop for reinforcement wrapping turns.
- Tension 230V-50Hz
-
Semi-automatic Wrapping Machine Spinny S300-TP
-
- Semi-automatic wrapping machine with pre-stretch (motorized)
- Rotating table diameter 1650 mm load 2000 kg
- Motorized pre-stretch with 1 or 2 motors for film tensioning
- Distance between column and rotating table 500 mm
- Wrapping height up to 2100 mm detected by photocell
- Separate programming of top and bottom reinforcement wraps
- Table rotation regulated by variable frequency drive from 5 to 10 rpm
- Sensor controlled rotation stop
- Variable speed of film carrier completely customizable
- Independent top and bottom turns
- Film carrier fall protection system
- Electronic control panel with 10 password protected working cycles
- Manual film carrier stop for reinforcement wrapping turns.
- Tension 230V-50Hz
-
Semi-automatic Wrapping Machine Spinny S350 Touch Screen
-
- Semi-automatic wrapping machine with pre-stretch (motorized)
- Rotating table diameter 1500 mm load 1200 kg
- Motorized pre-stretch with 1 or 2 motors
- Distance between column and rotating table 500 mm
- Wrapping height up to 2100 mm detected by photocell
- Separate programming of top and bottom reinforcement wraps
- Table rotation regulated by variable frequency drive from 4 to 12 rpm
- Sensor controlled rotation stop
- Variable speed of film carrier completely customizable
- Independent top and bottom turns
- Film carrier fall protection system
- Touch screen control panel with 10 password protected working cycles
- Manual film carrier stop for reinforcement wrapping turns.
- Tension 230V-50Hz
-
Semi-automatic Wrapping Machine Spinny S350-TP Touch Screen
-
- Semi-automatic wrapping machine with pre-stretch (motorized)
- Rotating table diameter 1650 mm load 2000 kg
- Motorized pre-stretch with 1 or 2 motors
- Distance between column and rotating table 500 mm
- Wrapping height up to 2100 mm detected by photocell
- Separate programming of top and bottom reinforcement wraps
- Table rotation regulated by variable frequency drive from 4 to 12 rpm
- Sensor controlled rotation stop
- Variable speed of film carrier completely customizable
- Independent top and bottom turns
- Film carrier fall protection system
- Touch screen control panel with 10 password protected working cycles
- Manual film carrier stop for reinforcement wrapping turns.
- Tension 230V-50Hz
-
Semi-automatic Wrapping Machine Spinny S500 Touch Screen
-
- Semi-automatic wrapping machine with pre-stretch (motorized)
- Automatic cut&weld system
- Rotating table diameter 1650 mm load 2000 kg for pallet 1000Ã1200 mm
- Distance between column and rotating table 500 mm
- Wrapping height up to 2100 mm detected by photocell
- Separate programming of top and bottom reinforcement wraps
- Table rotation regulated by variable frequency drive from 5 to 15 rpm
- Sensor controlled rotation stop
- Variable speed of film carrier completely customizable
- Independent top and bottom turns
- Film carrier fall protection system
- Touch screen control panel with 10 password protected working cycles
- Manual film carrier stop for reinforcement wrapping turns.
- Rope reduction of the film
- Tension 230V-50Hz
-
Automatic Wrapping Machine Spinny S500 InLine
-
- Automatic wrapping machine with pre-stretch (motorized)
- Pallet height detected by photocell
- Motorized film pre-stretch with 1 or 2 motors
- Variable speed of film carrier completely customizable
- Working cycles controlled by PLC Siemens S7-1200 and control panel KTP700
- 10 customizable working cycles
- All motors controlled by inverter
- Pallet dimensions 1200Ã1200 mm h=2400 mm
- Load capacity 2000 kg
- Tension 400V-50Hz
- Automatic film cut system
-
Automatic Wrapping Machine Spinny S2300
-
- Automatic wrapping machine with pre-stretch (motorized)
- Pallet height detected by photocell
- Motorized film pre-stretch with 1 or 2 motors
- Variable speed of film carrier completely customizable
- Working cycles controlled by PLC Siemens S7-1200 and control panel KTP700
- 10 customizable working cycles
- All motors controlled by inverter
- Pallet dimensions 1200Ã1200 mm h=2400 mm
- Load capacity 2000 kg
- Tension 400V-50Hz
- Automatic film cut system
Wrapping Machines with Rotating Arm
- Designed for heavy or very big products, the wrapping machines with rotating arm are the best solution. Fully automatic or semi-automatic, they allow the wrapping of your products without the need of placing them on a rotating platform: is the arm of the machine itself that rotate around the pallet.
Best use of these kind of machines is also if you need to wrap unstable pallets.
-
Semi-automatic Wrapping Machine Rotax S3200
-
- Semi-automatic wrapping machine with electromagnetic brake
- Standard pallet dimension 1200Ã1200 mm
- Electromagnetic brake film tensioning
- Separate programming of top and bottom reinforcement wraps
- 托盘高度检测到光电管-标准h = 2100 mm; optional up to 3000 mm
- Arm rotation regulated by variable frequency drive from 4 to 15 rpm
- Sensor controlled rotation stop
- Variable speed of film carrier completely customizable
- Film carrier fall protection system
- Control panel with 10 password protected working cycles
- Tension 400V-50Hz
-
Semi-automatic Wrapping Machine Rotax S3200-XL
-
-
- Pallet dimensions up to 3000Ã1250 mm
- Electromagnetic brake film tensioning
- Separate programming of top and bottom reinforcement wraps
- 托盘高度检测到光电管-标准h = 2100 mm; optional up to 3000 mm
- Arm rotation regulated by variable frequency drive from 4 to 15 rpm
- Sensor controlled rotation stop
- Variable speed of film carrier completely customizable
- Film carrier fall protection system
- Control panel with 10 password protected working cycles
- Tension 400V-50Hz
-
Semi-automatic Wrapping Machine Rotax S3300
-
- Semi-automatic wrapping machine with pre-stretch (motorized)
- Standard pallet dimension 1200Ã1200 mm
- Motorized pre-stretch with 1 or 2 motors
- Separate programming of top and bottom reinforcement wraps
- 托盘高度检测到光电管-标准h = 2100 mm; optional up to 3000 mm
- Arm rotation regulated by variable frequency drive from 4 to 15 rpm
- Sensor controlled rotation stop
- Variable speed of film carrier completely customizable
- Film carrier fall protection system
- Control panel with 10 password protected working cycles
- Tension 400V-50Hz
-
Semi-automatic Wrapping Machine Rotax S3300-XL
-
- Semi-automatic wrapping machine with pre-stretch (motorized)
- Pallet dimensions up to 2800Ã200 mm
- Motorized pre-stretch with 1 or 2 motors
- Separate programming of top and bottom reinforcement wraps
- 托盘高度检测到光电管-标准h = 2100 mm; optional up to 3000 mm
- Arm rotation regulated by variable frequency drive from 4 to 10 rpm
- Sensor controlled rotation stop
- Variable speed of film carrier completely customizable
- Film carrier fall protection system
- Control panel with 10 password protected working cycles
- Tension 400V-50Hz
-
Automatic Wrapping Machine Rotax S5300
-
- Automatic wrapping machine with pre-stretch (motorized)
- Standard pallet dimensions 1200Ã1200 mm
- Motorized film pre-stretch with 1 or 2 motors
- Separate programming of top and bottom reinforcement wraps
- 托盘高度检测到光电管-标准h = 2100 mm; on request up to 3000 mm
- Arm rotation regulated by inverter from 4 to 15 rpm
- Sensor controlled rotation stop
- Variable speed of film carrier completely customizable
- Film carrier fall protection system
- Working cycles controlled by PLC Siemens S7-1200 and control panel KTP700
- Control panel with 10 password protected working cycles
- All motors controlled by inverter
- Tension 400V-50Hz
- Automatic cut system
-
Automatic Wrapping Machine Rotax S5500
-
- Automatic wrapping machine with motorised pre-stretch
- Specially designed for extra-large pallets
- Motorized film pre-stretch with 1 or 2 motors
- Separate programming of top and bottom reinforcement wraps
- 托盘高度检测到光电管-标准h = 2100 mm; on request up to 3000 mm
- Arm rotation regulated by inverter from 4 to 15 rpm
- Sensor controlled rotation stop
- Variable speed of film carrier completely customizable
- Film carrier fall protection system
- Working cycles controlled by PLC Siemens S7-1200 and control panel KTP700
- Control panel with 10 password protected working cycles
- All motors controlled by inverter
- Tension 400V-50Hz
- Automatic cut system
Robot Wrapping Machines
- Wrapping machines perfect for every packaging needs.
The self-propelled wrapping machines (Robot) are battery powered and can be used anywhere by everybody, as they are very easy to use and can wrap pallets of any dimension without moving them to other places.
-
-
-
Self-propelled Wrapping Robot Oscar
-
- Standard machine, maximum wrapping height 2100 mm
- Dimensions WxLxH: 690x1060x2100 mm
- Footprint of 1000mm from pallet during wrapping
- Minimum pallet dimensions: 600mm x 600mm
- Autonomy per charge: 320 pallets (W800x1200xH1500) with mechanical brake
- Full charge cycle time of 8 hours (battery charger on
- board)
- Motion signal lamp and sound signal at the start and end of the cycle
- Column height H: 2100mm
- Weight 250Kg
- Pallet height detected by photocell
- Moving speed adjustment up to 1,5 m/sec with gradual start / stop
- Adjustment of the film carriage speed from 3 to 5 m/min.
- Independent top and bottom reinforcement wraps
- 上升和下降电影马车的速度ustment
- Film tension adjustment
- Middle reinforcement with height and number of wraps adjustment
- Manual movement by directional steering wheel buttons
- Hinged column for transport
- Side and back forklift housing
- Model V.1 — Film carrier with mechanical brake for film tensioning
- Model V.3 — Film carrier with electromagnetic brake for film tensioning
- Model V.5 — Film carrier with motorized pre-stretch 150% standard (100%, 200%, 250% on request)
Thermo-shrinking Ovens
- The thermo-shrink oven TS/32 by EFFE3ti is available in two versions: Gas and Electric. Both versions guarantee a perfect thermo-shrink process for the protection of your products from water and dust.
The Gas version is equipped with a patented system of insulated chamber, that reduce heat dispersion and energy consumption
-
Gas Powered Thermo-shrinking Oven for Pallets TS 32/G
-
- Natural Gas powered Thermo shrinking oven, an efficient and innovative system to stabilize your pallet with thermo shrinking film.
The patented chamber closure system, allows significant energy savings and lower heating time.
The low operating cost, makes the GAS type the most appreciated for its efficiency and its perfect thermo shrinking results.
The TS32/G model, provided with catalytic panels, does not emit harmful gases during the working cycle.
-
Electric Thermo-shrink Oven for Pallets TS 32/E
-
-
- Power supply 400 V, 50 Hz (three phases+N+T)
- Installed power 48 kW
- Electric power / 40 kW
- Heating time approx. 30 min.
- Working temperature with film 120μ 200°C +/-5%
- Standard pallet dimensions L=1200; W=1200; H=1500
- Production 20 pallets/h
- Electrical consumption 20 pallets / 30 kW
Sealers and Case Erectors
- EFFE3ti distributes automatic and semi-automatic case erectors and case sealers with adhesive tape. Easy to use and stand-alone machines or complex forming and sealing fully automatic lines that are designed to fit the needs of every single customer.
-
Semiautomatic Case Erector EFFE-056
-
- TECHNICAL DATA
- Weight: 102 Kg
- Productivity: 600-800 boxes/hour
- Service temperature: + 5° C to + 35° C
- Overall plan dimensions: 1220Ã820 mm
- Air consumption per box cycle: 2.1 nl
- Pneumatic power supply: 6 bar
- Bed height (working height): 650 mm
-
Automatic Case Erector EFFE 56 – 58 – 608
-
- TECHNICAL DATA
-
Semiautomatic Sealing Machine Tape 34 – 346
-
- TECHNICAL DATA
- Weight: 160 Kg (TAPE34R) – 180 Kg (TAPE346R)
- Standard tape heads: TU2 (TAPE34R) – TU3 (TAPE346R)
- Box transfer speed: 24 metres per minute
- Electrical power supply: Three-phase 400V – 50 Hz / single-phase (upon request)
- Service temperature: + 5° C to + 35° C
- Electrical protection level: IP 55
- Installed power: 0,22 Kw
- Air consumption per box cycle: 8 nl (TAPE34R) – 6 nl (TAPE346R)
- Plan dimensions: 963Ã1390 (TAPE34R) – 1099Ã1390 (TAPE346R)
-
Semiautomatic Sealing Machine Tape 50 – 65 – 80
-
- TECHNICAL DATA
- Weight: 135 Kg (GT50) – 150 Kg (GT65) – 175 Kg (GT80)
- Box transfer speed: 24 metres per minute
- Electrical power supply: Three-phase 400V – 50 Hz / single-phase (upon request)
- Service temperature: from + 5° C to + 35° C
- Electrical protection level: IP 54
- Installed power: 0,22 kW
-
Semiautomatic Sealing Machine Tape 34R – 346R
-
- TECHINICAL DATA
- Weight: 160 Kg (TAPE34R) – 180 Kg (TAPE346R)
- Standard tape heads: TU2 (TAPE34R) – TU3 (TAPE346R)
- Box transfer speed: 24 metres per minute
- Electrical power supply: Three-phase 400V – 50 Hz / single-phase (upon request)
- Service temperature: + 5° C to + 35° C
- Electrical protection level: IP 55
- Installed power: 0,22 Kw
- Air consumption per box cycle: 8 nl (TAPE34R) – 6 nl (TAPE346R)
- Plan dimensions: 963Ã1390 (TAPE34R) – 1099Ã1390 (TAPE346R)
-
Automatic Sealing Machine with Flap Closer Tape 56F – 608F
-
- TECHNICAL DATA
- Weight: 270 Kg / 595 lb
- Standard tape heads: TU2 (TAPE56F) – TU3 (TAPE608F)
- Box transfer speed: 30 metres per minute (TAPE56F) – 24 metres per minute (TAPE608F)
- Electrical power supply: Three-phase 400V – 50 Hz / single-phase (upon request)
- Service temperature: from + 5° C to + 35° C
- Electrical protection level: IP 55
- Installed power: 0,25 kW
- Air consumption per box cycle: 2,5 nl
- Plan dimensions: 1010Ã1520 mm (TAPE56F) – 1160Ã1955 mm (TAPE608F)
Automatic and Semi-automatic Strapping Machines
- Full range of specific products for fully automatic, semi-automatic or manual strapping with PET or PP.
Tensioners, clamps, combined strapping tools, battery powered strapping machines, accessories, automatic strapping machines, stainless steel machines, application-specific machines.
-
Manual Strapping and Accessories
-
- The most economic and valuable tools for strapping. Full range of manual strapping machines, also battery operated, with PET, PP or iron strap. Accessories and consumables.
-
Semi-automatic Strapping Machines
-
- The semi-automatic strapping machines are the most economic and versatile solution in horizontal, vertical and for pallet version.
Available in many models, they are sturdy and reliable, occupy little space and are mobile thanks to the tilting wheels.
Semiautomatic strapping machines are ideal for low productions.
-
Automatic Strapping Machines
-
- Automatic strapping machines with horizontal or vertical strapping head at the best price. Also available in stainless steel.
-
Full-Auto Strapping Machines
-
- Fully automatic strapping machines for automatic packaging lines, with belt or roll conveyors, available with horizontal or vertical strapping head or stainless steel construction. Perfect for any type of application where the automation is important.
-
Strapping Machines for Corrugated Cardboard
-
- Specially designed strapping machines for corrugated cardboard
-
Strapping Machines for Magazines and Newspapers
-
- Special strapping machines for magazines and newspapers
Business Logistic
- Full range of mono- and multi-chamber baling presses for cardboard, paper, film, PET, aluminium, Tetrapak, cans and other products, bricketting presses for EPS, semi-aSutomatic and fully automatic industrial compactors.
Baling presses for paper, cardboard, film, …
- Automatic and semi-automatic baling presses for paper, cardboard, plastic, film, cans, PET, Tetrapak etc.
-
BaleTainer – Automatic Baling Press
-
- MAIN FEATURES
- Power supply: 400 V – 50 Hz
- Pressing force: 600 kN
- Pressure: 180 t/m3
- Weight: 6000 – 8000 kg
- Bale weight: up to 400 kg (3 slices)
- Automatic wire binding
-
BP3 – Single chamber press 3t
-
- MAIN FEATURES
- Power supply: 230 V – 50 Hz
- Power: 0,75 kW
- Pressing force: 27 kN
- Travel: 580 mm
- Weight: 275 kg
- Filling opening: 700Ã4500 mm
- Cycle timing: 27 sec.
- Bale weight: 30 kg
- Bale dimensions: 700 x 500 x 500 mm (inside the chamber)
- Strapping with two twines
-
BP6 – Single chamber press 6t
-
- MAIN FEATURES
- Power supply: 230 V – 50 Hz
- Power: 2,2 kW
- Pressing force: 40 kN
- Travel: 670 mm
- Weight: 470 kg
- Filling opening: 800Ã500 mm
- Cycle timing: 29 sec.
- Bale weight: 60 kg
- Bale dimensions: 800 x 700 x 600 mm (inside the chamber)
- Strap 13 mm
-
BP10 – Single chamber press 10t
-
- MAIN FEATURES
- Power supply: 400 V – 50 Hz
- Power: 2,2 kW
- Pressing force: 100 kN
- Travel: 700 mm
- Filling opening: 800Ã500 mm
- Bale weight: 80 kg
- Bale dimensions: 800 x 700 x 600 mm
- Strap 13 mm
-
BP4 – Single baling press 4t
-
- MAIN FEATURES BP4
- Power supply: 400 V – 50 Hz
- Power: 2,2 kW
- Pressing force: 40 kN
- Travel: 670 mm
- Weight: 390 kg
- Filling opening: 700Ã500 mm
- Cycle time: 43 sec.
- Bale dimensions: 700 x 700 x 500 mm (inside the chamber)
- Strap binding 9/13 mm
-
BP18 – Single Chamber Press 18t
-
- MAIN FEATURES
- Power supply: 400 V – 50 Hz
- Power: 4 kW
- Pressing force: 180 kN
- Travel: 890 mm
- Weight: 1400 kg
- Filling opening: 1190Ã555 mm
- Cycle time: 34 sec.
- Bale weight: 250 kg
- Bale dimensions: 1200 x 800 x 800 mm
- QuickDoor
- Mechanical ejection of the bale
- Strapping with four wires
-
BP28 – Single Chamber Press 28t
-
- Bales up to 320kg
YOUR BENEFITS
- direct marketing of valuable substance bales
- volume reduced by up to 90%
- high proceeds for bales
- saving of storage and transport costs
- durable, easy to operate, reliable
-
BP53 – Single Chamber Press 53t
-
- MAIN FEATURES BP 53
- Power supply: 400 V – 50 Hz
- Power: 4 kW
- Pressing force: 580 kN
- Travel: 890 mm
- Weight: 2130 kg
- Filling opening: 1192Ã575 mm
- Cycle time: 32 sec.
- Bale weight: 400 kg
- Bale dimensions: 1200 x 1100 x 800 mm
-
PP1208 – Single Chamber Press 58t/70t
-
- MAIN FEATURES PP 1208
- Power supply: 400 V – 50 Hz
- Power: 4 kW
- Pressing force: 580 kN
- Travel: 890 mm
- Weight: 2600 kg
- Filling opening: 1190Ã570 mm
- Cycle time: 37 sec.
- Bale weight: 400 kg
- Bale dimensions: 1200 x 1100 x 800 mm
- Strap binding
-
MK700 – Multi-chamber Press 6t
-
- MAIN FEATURES MK 700
- Power supply: 400 V – 50 Hz
- Power: 2,2 kW
- Pressing force: 60 kN
- Travel: 700 mm
- Weight: 780 kg
- Filling opening: 710Ã490 mm
- Cycle time: 32 sec.
- Bale weight: 40 kg
- Bale dimensions: 700 x 700 x 500 mm
- Strap binding
-
MK1100 – Multi-chamber Press 20t
-
- MAIN FEATURES MK 1100
- Power supply: 400 V – 50 Hz
- Power: 4 kW
- Pressing force: 200 kN
- Travel: 700 mm
- Weight: 1680 kg
- Filling opening: 1100Ã700 mm
- Cycle time: 33 sec.
- Bale weight: 250 kg
- Bale dimensions: 1130 x 730 x 800 mm
- Strap binding
-
FP200 – Drum Press
-
-
- Power supply: 400 V – 50 Hz
- Power: 4 kW
- Class: IP54
- Pressing force: 300 kN
- 体重:1645公斤
- Cycle time: approx. 77 sec.
- Drum dimensions (litres): 200 l
-
MT240 / MT120 / MT360 – Residual Waste Press
-
-
- Power supply: 230 V – 50 Hz
- Power: 0,37 kW
- Class: IP54
- Weight: approx. 150 kg
- Dimensions: 1200 x 800 x 2065 mm
- Bin dimensions (litres): 120 / 240 / 360 l
-
RC1100 and RC660/770 – Roll Container Press
-
-
- Power supply: 230 V – 50 Hz
- Installed power: 1,5 kW
- Class: IP54
- Weight: ca. 450 kg (440 kg RC 660/770)
- Dimensions: 1583 x 1348 x 1703 mm
- Container dimensions (litres): 1100 – 770 – 660
Briquetting presses for EPS, cans, …
- Briquetting presses for EPS, PET, aluminium, cans, etc.
-
CutCompact – Briquetting press for EPS
-
- MAIN FEATURES
- Power supply: 400 V – 50 Hz
- Power: 8,5 kW
- Class: IP54
- Pressing force: 250 kN
- Weight: 2000 kg
- Dimensions: 3360 x 1595 x 1755 mm
- Filling opening: 456 mm
- Briquette dimensions: 84 x 92 mm
-
Brikpress – Briquetting Press
-
- MAIN FEATURES standard machine
Packaging Solutions
-
The Strength of Stainless Steel
-
- Some industrial sectors provide for the processing of products and also their final packaging in damp and / or corrosive environments or even in cold rooms where temperatures reach many degrees below zero. In these extreme cases we must rely on special machines, able to resist these hostile environments.
-
Light or Unstable Products?
-
- They are a must-have our wrapping machines with integrated press, motorized or pneumatic, that are able to perfectly wrap all types of products, even the most light or unstable!
Available with rotating arm or table and in semi-automatic or fully automatic version.
-
Two in One
-
- Special wrapping machines with double rotating table and single film carrier.
-
Pack and Know the Weight
-
- Semi-automatic or automatic wrapping machines with integrated weighing system.
Printer to be combined for labeling.
-
Perfect Packing for Door and Windows
-
- Wrapping machines with stabilization system for door and windows packing.
Also with bubble wrap applicator!
-
Do You Need to Move it?
-
- It may happen that you have the need to move the wrapping machine from one position to another in your workplace. EFFE3ti manufactures rotary table wrapping machines with forklift slots for easy transport of the machine without having to dismantle it.
-
Load it with a Forklift
-
- Thousands of semi-automatic wrapping machines with open table for forklift entry used worldwide.
Available in every version and with all the optionals. Even in stainless steel or galvanised.
-
Wrap Delicate Products Like Flowers
-
- We produce special wrapping machines for metal trolleys with flowers or plants. Available in semi-automatic version with rotating or fully automatic table or table.
-
形式,密封,表带和交付
-
