MIAS employs more than 400 staff members at four locations and, as an OEM, supplies stacker cranes and telescopic forks to customers all over the world. MIAS has a clear vision: providing general contractors and system integrators with the best possible support when it comes to load handling attachments and stacker cranes in intralogistics. From finding and developing a solution to production and implementation right through to service and maintenance.
MIAS is presenting its completely newly developed, modularly designed shuttle system, which is characterized by particularly high performance in terms of driving dynamics. Customers benefit from maximum energy density in the smallest space, a control concept optimally matched to the individual components, and open connectivity.
The basics:
- Designed for stacker cranes and cross-distribution trucks
- Load: Industrial, Euro, Chep, or GMA pallets up to 1,500 kg
- Suitable for deep-freeze warehouses
The highlights:
- Speed up to 2.7 m/s (loaded), lifting at 1.5 m/s
- Open interface design enables variable connection to a wide variety of ASRS control systems
- Minimized space requirement of the control technology allows more room for energy storage and thus a higher reach
- Height of the shuttle only 155 mm - optimal use of storage space possible
The newly developed AKL stacker crane for automatic small components warehouses has been designed and built in conformity with state-of-the-art criteria. It boasts maximum performance data and low operating costs. The AKL series is characterized by low weight, high efficiency, minimal approach dimensions and a special design that ensures optimum use of the storage space. By combining the AKL with tried-and-tested MIAS load handling attachments, it makes a major contribution to achieving the economic and functional targets of the automatic small components warehouse system.
Pallets have been an integral part of logistics for over 50 years, and they are the most commonly used load carrier in high rise storage facilities. MIAS has worked to ensure the reliable storage and retrieval of pallets in automated systems for decades now. Your required throughput determines the dynamics of the stacker crane, and therefore which specific load handling attachment from our diverse range needs to be used. Whatever your requirements – one or two load handling attachments, single or double-deep, with additional conveyor and inclination unit – the design is determined by you!
The new PAL 23 is designed for heights between 23 m and 30 m and reaches speeds of up to 240 m/min when traveling and 120 m/min when lifting.
Due to a weight reduction of up to 20 percent compared to the current series and a tapered mast design, PAL 23 scores especially in resource efficiency and reduced energy consumption.
A new type of rope drive with a large deflection pulley extends the service life of the components so that maintenance requirements are reduced. The bolted guide rail facilitates replacement and the pretensioned guide pulley enables easy and precise adjustment, which has a positive effect on running. The new development is designed for payloads of up to 1,500 kg for single-depth applications and 1,250 kg for double-depth applications. The acceleration values are between 0.5 m/s² and 1 m/s².
After the introduction of the PAL 23 units, the series will be successively extended to all configurations from 10 m to 45 m.
The gear drive is used for pallet stacker cranes that need to be high-powered over short distances. Extreme acceleration and braking combined with precise positioning are the strengths of the Turbo stacker crane.
Higher throughput thanks to acceleration of up to 3m/s2 and enhanced operational reliability with positive-locking power transmission. This technology also causes wheels and rails to wear less quickly, increasing their service life.
米娅是你的专家对塔式起重机冻结and refrigerated products. In recent years, MIAS has installed over 100 devices in environments with temperatures from -30°C to +5°C – including in Europe’s largest cold storage facility (40 m high).
The parts under the highest stress are manufactured from special steel that boasts a long service life even in the most extreme conditions. The compact design enables optimum approach dimensions and maximizes use of the available space. Specially insulated and heated control cabinets are used in the device, to prevent condensation inside the housing and ensure optimum availability.
Operational reliability becomes even more important when you are moving extreme weights and volumes.
With MIAS, a single tine can handle standard working loads of up to 40 tons, as already proven many times. But dynamics haven’t been forgotten. MIAS designs machines that have shifted 11 tones at 210 m/min, for example. In this high-performance environment, in particular, perfectly harmonized stacker cranes and load handling attachments are critical for success. And MIAS is your one-stop shop for both these items.
Used in distribution centers with an order-picking zone for transferring pallets onto chain conveyors.
Continually optimized and further developed by MIAS for over 25 years.
In distribution centers with order-picking zones, pallets often need to be transferred on tilted gravity conveyors.
Combined telescopic forks with inclination device from MIAS have been specially developed for these applications and adapted to satisfy ever more demanding requirements.
The shuttle efficiently stores palletized goods and products in consolidated channel storage systems. The shuttle is specially configured for your application.
Modular system for the individual selection of components such as sensors, electronics and controllers.
The MIAS Miniload telescopic fork is the ideal load handling attachment for the single-deep storage of containers of the same size in single-space or multi-space shelves.
The optimized overall size enables a low shelf width and a very small distance between the shelves.
The double-deep MIAS Miniload telescopic fork is particularly well suited to double-deep storage of containers in small components warehouses with narrow aisle clearance.
Operation: Three extending components enable a container to be placed either single-deep or double-deep in the storage compartment.
Due to the low cross-section height, a minimum distance between the containers in the shelves, and therefore a maximum number of containers in the warehouse, is achieved.
Telescopic forks with lateral belt conveyor can be used to store and retrieve containers and cartons up to a maximum weight of 100 kg, up to five levels deep, in shelf compartments.
Our positive-locking drive concept enables high dynamic values to be achieved.
The telescopic fork can also be used in combination with a laterally mounted belt conveyor to create driven conveyor systems at the storage and retrieval location.
Exact positioning of the load is ensured by the alignment and centering of the load via flaps on the load handling device.
These combined telescopic forks can be used to store and retrieve containers weighing up to 140 kg, single-deep or double-deep, in shelf compartments. Our positive-locking drive concept enables high dynamic values to be achieved.
The telescopic fork can also be used in combination with a belt conveyor to create driven conveyance systems at the storage and retrieval location. Finally, the additional load capacity on the double-deep version ensures the exact positioning and alignment of the load.
Cartons pose particular challenges when it comes to automatic load handling: from highly diverse conditions and sizes to practically undefinable tolerances. But here too, MIAS has a solution!
With the Viper X series you have a firm grip on every type of carton. Thanks to the individually configurable number of gripper fingers, up to four loads can be stored one behind the other in a single storage compartment.
A MIAS solution for moving extremely heavy loads weighing 1,500 to 7,000 kg. Designed for use in a challenging environment, often with a high level of pollution.
Whether you want to shift a simple steel plate or a gear for wind turbines – this is exactly what MIAS telescopic forks from the heavy-duty range are designed for.
The MIAS Super heavy-duty telescopic fork is the king among high rise storage facilities. It transports loads weighing 30 tons or more with ease, on just ONE tine. Thanks to its robust design, it is extremely low maintenance and reliable.
Operation: Perfect for high rise storage facilities in the steel industry.
In automotive production, chassis and vehicle bodies always have to be transferred from one production line to the next as they move through the various production steps.
Here, reliable and precise handling of the components is absolutely essential – and this is a particular strength of the MIAS eccentric-stroke telescopic fork.
It is not without good reason that automotive manufacturers around the world put their trust in our telescopic forks.
Like all machines and systems, the mechanical and moving components of intralogistical parts also suffer wear.
MIAS comes up with innovative solutions in retrofit projects, to make your system high-performing, efficient, future-proof and highly available once more.
Is your storage system showing its age? As an expert in stacker cranes, with targeted modernization we can optimize existing systems at low cost regardless of the manufacturer, and make them fit for the future. Refitting is carried out in the shortest possible time, ensuring you a smooth transition without significant downtime. What’s more, you will once again be able to obtain spare parts for your system.
MIAS analyzes the actual condition of the equipment, draws up a retrofit quotation for replacing or reconditioning the components that require it, and flags up possible potential for optimization.
With most systems, use of the ARATEC system makes it possible to increase throughput and minimize wear.
The complete MIAS portfolio also includes a professional after sales service.
Every day, we work to impress our customers and partners with our service. Our performance is what makes customers recommend MIAS to others, strengthening our market position for the long term.
… extends the life of your system.
Qualified, experienced and committed MIAS engineers are specialists in the maintenance of both in-house and third-party systems, and ensure long-term and efficient operation. We strive to ensure lasting high availability and value retention.
According to the BGV (German institution for statutory accident insurance and prevention), stacker crane systems must undergo an annual inspection in accordance with the UVV (German accident prevention regulations). This aims to ensure the safety of both people and machinery. We will be happy to monitor the timely performance of this inspection.
Our portfolio also includes optional inspections of ladders, arresters and fall prevention PPE.
我们建议运动分析冷杉t step for assessing the potential of a retrofit project to optimize your system. This establishes the potential of the ARATEC positioning system to increase throughput and minimize wear, and therefore determines its cost effi-ciency