Videos
Loading the player ...
  • Offer Profile
  • Epson Factory Automation是机器人技术和全方位服务提供商从制造到销售的先驱,包括支持。自1980年我们的机器人推出以来,我们一直是自动化领域的领先提供商之一。

    我们的机器人系统的特点是例外precision, speed, reliability and durability.
产品介绍
  • 爱普生机器人

  • Modern automation solutions must meet a few simple requirements: as fast as possible, as small as possible, as inexpensive as possible. Epson offers you a wide range of unique high-speed and high-precision industrial robots.
      • 新的爱普生机器人

          • The new Epson N Series

          • 紧凑的莱克阀门e no other 6 axis robot. Maximum efficiency over the smallest footprint. Extremely manoeuvrable due to inwardly orientated second axis.

            设计:垂直铰接的手臂
            负载容量:2,5公斤
            Range: P point* 450 mm
            Repeatability: + / – 0.02 mm

            High output, low space requirement

            新的Epson N系列6 Axis机器人可以轻松地到达其工作单元的每个点 - 即使在真正局促的地方。原因:具有全新折叠臂的革命性运动学几何形状。

            新的N系列涵盖了一个动作场,您通常需要一个具有明显更长臂长度的6轴机器人。

            Extremely manoeuvrable due to inwardly orientated second axis

            经典的6轴机器人在外部方向上起作用:手臂必须完全伸展以重新定位。这会花费时间和时间。

            In the new Epson N series, the second axis is oriented inwards, thus moving the centre of rotation downwards. This means the second axle shaft can travel through the zero position. To put it more bluntly: The second axis "hops" from one side to the other. This manoeuvrability over a very small footprint is unheard of until now, and leads to highly efficient work processes.


          • Epson的新智能双臂机器人

          • The dual arm robot from Epson can carry out varying tasks almost autonomously using its arm geometry based on human physiology and wide-ranging integral sensors such as cameras, force sensors and acceleration meters. Even tasks which to date have been difficult to automate can now be performance by a robot.


        • Spider Robots - The Epson Robot Revolution

        • Thanks to its unique construction, the Epson Spider robot is not only extremely compact and incredibly fast. It also uses the maximum working range of its arm lengths 100% without the otherwise usual dead zone of classical SCARA robots!

          极度紧凑,灵活且非常适合狭窄的生产单元

          Epson Spider是Scara机器人的新物种。这些4轴机器人设计为在水平飞机上工作的人手臂工作,非常适合快速采摘应用程序和组装过程。
          Apart from that, the Spider combines all advantages of the high-performance Epson SCARA robots. Among them are outstanding cycle times and joining properties, high insertion forces and rigidities, superb repeatability and an excellent deadload–payload ratio.

          这是第一个也是唯一具有完美圆柱形包膜的圣嘉机器人。Thanks to that, the impressively productive spider can reach all positions of its area of activity (100%) and also convinces with short cycle times

            • Epson Spider RS3

            • Cylindrical Workspace

              Payload: 1/3 kg
              Reach: 350 mm

            • Epson Spider RS4

            • 更多的手臂力量

              有效载荷:1/4公斤
              Reach: 550 mm

              The Epson Spider RS4 has more “arm strength” and a wider operating range than its little brother RS3. As a result, the Epson Spider RS4 is able to carry heavier loads and is optimally suited for applications with a larger envelope.

              Epson Spider是Scara机器人的新物种。这些4轴机器人设计为在水平飞机上工作的人手臂工作,非常适合快速采摘应用程序和组装过程。
              Apart from that, the Spider combines all advantages of the high-performance Epson SCARA robots. Among them are outstanding cycle times and joining properties, high insertion forces and rigidities, superb repeatability and an excellent deadload–payload ratio.

              这是第一个也是唯一具有完美圆柱形包膜的圣嘉机器人。因此,令人印象深刻的生产性蜘蛛可以达到其活动领域的所有位置(100%),并且还可以说服周期时间短。

          • 圣嘉机器人

          • 下一代圣灵机器人
            Compact, high Speed, high Precision and wide Variety

            不再想到您的下一个圣嘉机器人,因为Epson机器人可以比以往任何时候都更有选择的力量。有300个型号的尺寸可从175 - 1.000毫米覆盖范围,有效载荷高达20kg,Washdown型号和清洁室型号,很可能Epson具有应用程序所需的型号和配置。

              • Epson SCARA G1

              • 我们的迷你 - 紧凑的力量

                Payload: 0.5/1 kg
                Reach: 175 /225 mm

                在大多数狭窄空间中的任务解决方案:the Epson G1 series — developed as a micromanipulator, transfer unit or high-performance feeder for larger robots. Designed for work where a hundredth of a millimetre matters, such as for electronic manufacturing or precision-mechanical work processes. Ultralight due to its high-strength aluminium design and at the same time compact and powerful.

              • Epson SCARA G3

              • It's all about the curve

                Payload: 1/3 kg
                Reach: 250 /300/ 350 mm

                A high percentage of all assembly work is performed in the same arm position. Therefore, Epson SCARA-G3 are available with a left-curved first arm (sine) or a right-curved first arm (cosine). The patented arm geometry allows considerably reduced movement cycle times, since time-consuming swivelling to change arm positions is obsolete in most cases. The G3 is also available with a straight arm. The devices are particularly suitable for use in confined spaces as they are common in medical engineering and automated component manufacture, for example.

              • Epson SCARA G6

              • The new efficiency level

                Payload: 3/6 kg
                触及:450 /550 /650毫米

                G6系列的新设计提供了非常紧凑的尺寸的最大工作信封。机器人可以用手臂长度执行任务。通常需要600毫米时550毫米。G6系列是需要最高精度高速的应用理想的解决方案,例如机械和电气零件的生产,采摘应用程序,配备小零件,给药和喂食。

              • 爱普生SCARA G10

              • Fast and strong

                有效载荷:5/10公斤
                Reach: 650 / 850 mm

                Ultrafast speed and higher payload? A combination that Epson SCARA robots of the G10 series can perfectly handle due to the high arm rigidity. G10 are fast in every sense of the word — for assembly and configuration as well as for handling with multi-grippers. They use all their advantages particularly in applications such as the assembly of heavy parts, packaging and palletising as well as loading and unloading. Since there are no tubes, the design is very compact.

              • Epson SCARA G20

              • Long arm with high strength

                Payload: 10/20 kg
                Reach: 850 /1000 mm

                Manipulators of the G20 series are particularly suitable for high payloads such as heavy parts or packaging units (up to 20 kg). Since the arm of the G20 is up to 1,000 mm long, the work envelope is large. Due to the high moment of inertia of the U joint, heavy loads can be handled fast and reliably without any vibration of the robot arm as is the case for many models with a similar arm length.

            • Controllers

                • Epson RC180

                • Works According to Instruction

                  Epson RC180可用于圣贺机器人和6轴机器人。此外,设计为模块化系统的选件单元提供了进一步的接口和技术模块。

                  RC180的基本区域仅比A4片略大,因此非常小但功能非常强大。小型智能价值之一主要是为从网络操作而设计的。它特别灵活,因为紧凑型从控制器可用于圣aca和6轴机器人。

                • Epson RC700-A

                • Open control concept for a wide range of applications

                  Compact, powerful and as flexible as you need to meet your demands, the new RC700-A controller is a universal prodigy, just as capable as a stand-alone or part of an integrated system. If it's extended to create a multi-manipulator controller, the RC700-A can control several robots and various peripherals in a complex system.

                  The RC700-A controller can be expanded with a variety of image processing systems to meet your requirements. It's also designed for the new generation of robots featuring Epson's QMEMS sensor technology.
                • Epson RC90

                • RC90:一个可能性的世界,在一个很小的空间中

                  RC90是其在市场上性能类中最紧凑,最轻巧的控制器之一。小型,聪明且价值非常好,主要是为从属网络操作而设计的。串行接口RS-232C,26/14标准I/O和以太网端口已安装。此外,用于与外部设备进行通信的扩展卡并将集成到现场总线网络中可以根据您的要求灵活地扩展系统,成本非常低。

              • Epson Vision Systems

              • For Robots with eye contact
                在机器人和图像处理之间以毫秒为单位的通信是Epson图像处理系统的基本原理。您可以将Epson Smart Vision软件连接到固定或移动摄像机,或者在6.0版中使用框架抓取卡片,其中包含其他功能。

                The innovative software for image processing

                得益于与Epson RC+开发接口的联合编程环境,连接机器人和视觉系统时不会浪费时间。通过简单的命令和图形对象的直观界面,可以通过简单的参数化来解决需要灵活自动化的任务。

                功能和优势

                • Communication in milliseconds between robot and image processing
                • 通过集成到RC+开发环境来减少开发时间
                • Easy and comfortable Drag & Drop programming without additional complex editors
                • Detection of parts even in varying lighting conditions thanks to various tools like blob analysis, geometric and polar search, and many more.

                  • SOFTWARE EPSON VISION GUIDE 7.0

                  • Create vision sequences with a few clicks of a mouse. Epson vision guide 7.0 supports high resolution cameras.

                    Simple, reliable and powerful

                    The Epson vision Guide 7.0 for the Epson universal controller RC700-A assure with already proven - and new features:

                    • Simulationof image processing
                    • 赶上机器人运动期间的记录和评估高速
                    • 缺陷检查for checking specifications and samples
                    • Supportfor high resolution cameras(2 mp/ 5 mp) andcolour cameras

                    High-performance image processing system - matched to your application

                    EPSON COMPACT VISION (CV1) --This compact system is particularly suitable for customers who do not always use a computer for image processing.

                    Epson紧凑型视觉(CV2) -For requirements such as short cycle times and an extremely high camera resolution (more than 1.3 MP).

                    Epson PC Vision(PV1) -该解决方案适用于需要很短的周期时间和极高的相机分辨率(超过1.3 MP)的客户。

                      • Epson紧凑型视觉(CV1)

                      • Flexible and compact, without PC

                        • 非常适合不总是使用计算机进行图像处理的客户。
                        • Combine with up to 8 standard or high-resolution USB cameras, permanent or mobile installation.
                        • Objects in various focal lengths, integrated or with offset lens.
                        • Outstanding price/performance ratio.
                      • Epson compact vision (CV2)

                      • 高处理器速度,没有PC

                        • 处理图像不需要计算机。
                        • For requirements such as short cycle times and an extremely high camera resolution (more than 1.3 MP).
                        • 最多可与4台GIGE摄像机和2台USB摄像机(手机或固定)结合使用。
                        • Option of high-speed communication via Giga-Ethernet.
                        • Two variants: CV2-S and CV2-H for particularly high speeds.
                      • Exceptionally powerful, PC-supported

                        • Requires the provision of a computer for image processing.
                        • 对于诸如周期时间和极高的相机分辨率(超过1.3 MP)之类的要求。
                        • Combine with up to 8 GigE cameras, mobile or stationary.
                        • Option of high-speed communication via GigaEthernet.