Navigation :EXPO21XX>FLUID 21XX>H06: Miniature hydraulics> miniBOOSTER Hydraulics
  • Offer Profile
  • miniBOOSTER® hydraulic pressure boosters offer a full range of dedicated solutions engineered to lower costs by turning low system pressure into high pressures ranges of 20 – 5,000 bar.

    We have a comprehensive range of hydraulic pressure intensifiers that cover 12 intensification ratios up to 5,000 bar and flows up to 70 l/min using almost any media including tap water.

    miniBOOSTER is ISO 9001 certified
Product Portfolio

  • Boosters, Oil

    • HC1

      • HC1 versions: 9 different intensification factors
      • PIN：20 - 200 bar（入口压力）
      • PH: 800 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
      • Mounting:内联管
      • 配件:Pilot operated dump valve available

    • HC2

      • HC2 versions:11 different intensification factors
      • PIN:20 – 200 bar (inlet pressure)
      • PH:800 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
      • Mounting:内联管
      • 配件:Pilot operated dump valve available

    • HC2D

    • Up to 2.5 times the volume
      • HC2D versions: 12 different intensification factors
      • PIN：20 - 200 bar（入口压力）
      • PH: 800 bar maximum
        （出口压力）
      • PRETURN: As low as possible (Return pressure to tank)
      • Intensification ratios：pH=
        (PIN- pReturn) i (Intensification)
      • Mounting: Inline tube
      • 配件：pilot operated dump valve available

    • HC2P Booster Pump

      • HC2P versions: 10 different intensification factors
      • PIN: 0.4 bar vacuum to 2 bar in suction line (inlet pressure)
      • PH: 800 bar maximum
        （出口压力）
      • Intensification ratios：pH=
        (PIN- pReturn) i (Intensification)
      • Mounting: Inline tube
      • Rotation speed: Minimum 1,200 min-1/ maximum 3,000 min-1
      • Starting torque： 最大限度。启动扭矩0.14 nm
      • Power Consumption: 87 W
      • 配件：pilot operated dump valve available

    • HC3

      • HC3 versions:11 different intensification factors
      • PIN:20 – 200 bar (inlet pressure)
      • PH:500 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
      • Mounting:NG6 (D03) stacking manifold system
      • 配件:Pilot operated dump valve available

    • HC3-C

      • HC3 versions:11 different intensification factors
      • PIN:20 – 200 bar (inlet pressure)
      • PH:500 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
      • Mounting:NG6 (D03) stacking manifold system

    • HC3-D

      • HC3 - D versions:11 different intensification factors
      • PIN:20 – 200 bar (inlet pressure)
      • PH:500 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
      • Mounting:歧管系统迷你吧模式
      • 配件:Pilot operated dump valve available

    • HC3-F

      • HC3 - F versions: 11 different intensification factors
      • PIN:20 – 200 bar (inlet pressure)
      • PH:500 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
      • Mounting:歧管系统迷你吧模式
      • 配件:Pilot operated dump valve available

    • HC3-H

      • HC3 - H versions:11 different intensification factors
      • PIN:20 – 200 bar (inlet pressure)
      • PH:500 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
      • Mounting:NG6 (D03) stacking manifold system
      • 配件:Pilot operated dump valve available

    • HC3-I

      • HC3-我版本：11 different intensification factors
      • PIN:20 – 200 bar (inlet pressure)
      • PH:500 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
      • Mounting:NG6 (D03) stacking manifold system
      • 配件:Pilot operated dump valve available

    • HC4

      • HC4 versions:9 different intensification factors
      • PIN:20 – 200 bar (inlet pressure)
      • PH:800 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
      • Mounting:内联管
      • 配件:Pilot operated dump valve available

    • HC5

      • HC5版本：11 different intensification factors
      • PIN:20 – 200 bar (inlet pressure)
      • PH:800 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
      • Mounting:内联管
      • 配件:Pilot operated dumpvalves incorporated
        高压在两个方向上

    • HC6

      • HC6 versions:9 different intensification factors
      • PIN:20 – 200 bar (inlet pressure)
      • PH:800 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
      • Mounting:内联管
      • 配件:Pilot operated dump valve available

    • HC6D

      • HC6D versions:9 different intensification factors
      • PIN:20 – 200 bar (inlet pressure)
      • PH:800 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
      • Mounting:内联管
      • 配件:Pilot operated dump valve available

    • HC7

      • HC7 versions:5 different intensification factors
      • PIN:20 – 200 bar (inlet pressure)
      • PH:2000 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
      • Mounting:内联管
      • 配件:Pilot operated dump valve incorporated

    • HC8

      • HC8 versions:5 different intensification factors
      • PIN:20 – 200 bar (inlet pressure)
      • PH:2,000 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
      • Mounting:内联管
      • 配件:Pilot operated dump valve incorporated Pressure gauge/transducer connection available

    • HC9

      • HC9版本：1个强化因子
      • PIN:20 – 200 bar (inlet pressure)
      • PH:5,000 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
      • Mounting:内联管
      • 配件:Pilot operated dump valve available

  • 不锈钢助推器

    • HC2W

      • HC2W versions:11 different intensification factors
      • PIN:Inlet pressure 20-200 bar
      • PH:800 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
      • Mounting:内联管
      • 配件:Pilot operated dump valve available

    • HC4W

      • HC4W版本：9 different intensification factors
      • PIN:Inlet pressure 20-200 bar
      • PH:800 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
      • Mounting:内联管
      • 配件:Pilot operated dump valve available

    • HC7W

      • HC7W versions:5 different intensification factors
      • PIN:20 – 200 bar (inlet pressure)
      • PH:2,000 bar maximum for
        media > 5 cSt (mm2/s)
      • PH:1,000 bar maximum for
        media < 5 cSt (mm2/s)
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
      • Mounting:内联管
      • 配件:Pilot operated dump valve incorporated

    • HC8W

      • HC8W versions:5 different intensification factors
      • PIN:Inlet pressure 20-200 bar
      • PH:2,000 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
      • Mounting:内联管
      • 配件:Pilot operated dump valve incorporated
        Pressure gauge/transducer connection available

  • 助推器，双媒体

    • HC2D2

      • HC2D2 versions:9 different intensification factors
      • PIN:20 – 200 bar (inlet pressure)
      • PH:800 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
        The intensification ratio is related to the inlet pressure at media 2,
        the values in the table are measured at 1 bar on media 2
      • Drain connections:最大限度。5条
      • Mounting: Inline tube

    • HC6D2

      • HC6D2 versions:9 different intensification factors
      • PIN:20 – 200 bar (inlet pressure)
      • PH:800 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
        The intensification ratio is related to the inlet pressure at media 2,
        the values in the table are measured at 1 bar on media 2
      • Drain connections:最大限度。10 bar
      • Mounting: Inline tube

    • HC6D2W

      • HC6D2W versions:9 different intensification factors
      • PIN:20 – 200 bar (inlet pressure)
      • PH:800 bar maximum
        （出口压力）
      • PRETURN:As low as possible (Return pressure to tank)
      • Intensification ratios:PH=
        (PIN- pReturn) i (Intensification)
        The intensification ratio is related to the inlet pressure at media 2, the values in the table are measured at 1 bar on media 2
      • Drain connections:最大限度。10 bar
      • Mounting:内联管

  • Intensifier Systems

    • M-HC6 (up to 500 bar)

    • The M-HC6 is a complete, ready-to-install, high-flow and high-pressure intensifier system. The system is based on the miniBOOSTER HC6 intensifier and includes an integral high-flow bypass and isolation valves.
      • PIN= 20–350 bar
        (Inlet pressure)
      • PH= 500 bar
        (Outlet pressure)
      • Q= 100 l/min
      • Weight:23 kg

    • M-HC6D

    • M-HC6D是一个完整的，现成的，高流量和高压增强器系统。该系统基于MiniBooter HC6D增强剂，并包括一个积分的高流量旁路和隔离阀。
      • PIN= 20–350 bar（入口压力）
        PH= 500 bar (Outlet pressure)
        Q= 100 l/min
        Weight: 32,3 kg

    • M-HC7 (up to 800 bar)

    • The miniBOOSTER M-HC7 Portable Intensifier System is a rugged unit designed for demanding industrial applications. The M-HC7 can be used with any low pressure (20 to 200 bar) power source providing a minimum flow of 2 lpm. Output pressure as high as 800 bar. Reliability is a primary design consideration. The M-HC7 is equipped with a 10-micron filter and a visual filter condition indicator. Service life is extended and down-time avoided.

    • M-HC7 (up to 2,000 bar)

    • The miniBOOSTER M-HC7 Portable Intensifier System is a rugged unit designed for demanding industrial applications. The M-HC7 can be used with any low pressure (20 to 200 bar) power source providing a minimum flow of 2 lpm. Output pressure as high as 2000 bar. Reliability is a primary design consideration. The M-HC7 is equipped with a 10-micron filter and a visual filter condition indicator. Service life is extended and down-time avoided.

  • 配件- Filters

      • In-Line Filter

      • Description
        The hydraulic in-line filter provides protection in hydraulic systems up to 350 bar.

      • High Pressure T-filter

      • Description
        该过滤器可在高达800 bar的液压系统中提供保护。

      • T-filter

      • Description
        This T-filter provides protection in hydraulic systems up to 350 bar.

      • Filter Housing

      • Description
        This in-line filter provides protection in hydraulic systems up to 200 bar.

      • NG6 Filter

      • Description
        This filter provides protection for NG6 block systems up to 200 bar.

  • 配件- Valve Housing

      • CV1

      • Description
        The CV1 is a cartridge style directional valve which can be directly mounted to the miniBOOSTER. It is made for use with cartridges conforming to the C-10-4 standard. Both manual operated and solenoid operated valves are available.

      • CV2 – with PRV

      • Description
        The CV2 incorporates a Pressure Reducing Valve (PRV) to control inlet pressure to the miniBOOSTER and an option of orifices to reduce inlet flow to the maximum allowed for the intensification ratio selected.

      • CV3 – with Control Valve & PRV

      • CV3结合了减压阀（PRV），以控制到MiniBooster的入口压力，可选的孔口可将入口流量减少到所选的强度比的最大值，以及一个4/3的控制阀，以直接在前进，垃圾场中直接流动。和中立位置。

      • CV4 – with Filter & PRV

      • The CV4 incorporates a 10 micron filter element to protect the miniBOOSTER, a Pressure Reducing Valve (PRV) to control inlet pressure to the miniBOOSTER and an optinal orifice to reduce inlet flow to the maximum allowed for the intensification ratio selected. Check valves protect the filter from backflow during the dump cycle.

      • CV5 – with Sequence Valve

      • CV5结合了一个序列阀，该序列允许圆柱体的快速向前移动，通过指导全入口流直接通过小型焦点直至达到设定的压力。此后，序列阀打开，助推器开始振荡。当达到高压侧H上的最终压力H时，该设备将自动失速。

  • 配件- Power Packs, other

      • Hydraulic Power Pack PP-HC7-12XX series

      • Pressure up to 3,000 bar.
        The PP-HC7 series offers a compact high pressure pump in a rugged steel frame. Reliability is our primary design consideration which is why the units are equipped with 2 off 10 micron filters with a visual indicator and an hour meter for planned maintenance.

      • 液压电源包PP-HC7-12XXPV塔

      • Pressure up to 2,000 bar
        PP-HC7塔系列在坚固的钢制框架中提供紧凑的高压泵。可靠性是我们的主要设计考虑因素，这就是为什么单元配备了一个飞行员控制的止回阀，该校准阀可将油直接带到油箱中，并以最小的压降下降，再加上2个带有视觉指示器的10微米过滤器和一个小时仪表，用于脱落的维护。。

      • Adapter Kits

        • Manifold Adapter Kit
        • Adapter plates
        • 坚果和支架

      • POV-2000 Pilot Operated Check Valve

      • POV-2000是一个高压飞行员操作的止回阀，旨在与高压气缸一起使用，能够以最小的压力损失返回大量的油。
        The unit contains a screen that will protect the valve from dirt from high pressure side. The unit is weighing only 2.5 k

  • Applications

  • How does miniBOOSTER work?
    miniBOOSTER’s are oscillating boosters. They automatically intensify system pressure giving a higher outlet pressure and will compensate for oil loss on the high pressure side. This function of the miniBOOSTER is based on our patented system.

    • Mobile Applications

    • miniBOOSTER is commonly used to supply high pressure to attachments where small cylinders and high force are required.
      The miniBOOSTER can utilise the low pressure vehicle hydraulic system to supply high pressure to operate high pressure tools, compared to using expensive high pressure pumps with flexible hoses.

      Well-proven applications:
      • Mini demolition tools
      • Pile drivers
      • Tools in man lifts

    • Offshore Applications

    • miniBOOSTER is commonly used in casing tongs and ROV tools where the compact size, and the reliability are essential. An increasing number of sub-systems are requiring high pressure 350–800 bar.
      miniBOOSTER offers a well proven solution which can be installed directly where high pressure is needed.

      Well-proven applications:
      • Wellhead Control Panels
      • Casing Tongs
      • Rough Necks
      • ROV tools (Cutting, crimping, bolt tensioners)
      • Blowout preventors
      • Downhole Safety valves

    • Hydraulic Power Pack Applications

    • miniBOOSTER is commonly used in Power Packs generating high pressure and noise free operation. Power Packs equipped with miniBOOSTERs are capable of supplying high flow and pressure up to 3,000 bar. Keeping system cost and noise level very low (64 dBa) miniBOOSTER adds great value to your Power Pack.
      Well-proven Applications:
      • Bolt Tensioners
      • 螺母拆分器
      • Torque Wrenches
      • Railroad Tools
      • Test Stands
      • 救援工具
      • Workholding

    • Railroad Applications

    • miniBOOSTER is commonly used in railroad maintenance work, offering an inexpensive and reliable way of obtaining 700 bar high pressure.
      Based on existing hydraulic power sources providing 120–160 bar miniBOOSTER generates the high pressure for: Pulling/pushing tracks apart for welding, lifting the tracks and bending the rails.

      Well-proven applications:
      • Rail Road Stretchers
      • 切割工具
      • Power Packs
      • Crimping Tools

    • Rescue Applications

    • miniBOOSTER通常用于救援车辆公关oviding 350 to 630 bar for cutting spreading and lifting tools. The miniBOOSTER pressure intensifier can be mounted on the PTO of any rescue vehicle providing a reliable, fast and quiet High-Pressure source to existing rescue tools.
      Next generation rescue tools
      通过整合miniBOOSTER液压intensifier in the rescue tool, you can increase the supplied low pressure, to 700 bar or more, and benefit from higher force on your tool and a slimmer tool body.
      Cutting through the next generation of safe cars, protected with composite filled metal tubes, will be piece of cake. The rescue personnel will enjoy working with the super flexible, low pressure hoses (< 200 bar) which additionally will provide less risk of hose burst and potential high pressure oil injection injuries. The advantage counts less hassle, carrying the heavy petrol driven power pack, to the place of accident. On top of that the rescue operation will be almost noise free, creating less stress for the victim and rescue personnel.

    • Workholding Applications

    • miniBOOSTER is commonly used to operate clamps and support cylinders in workholding systems. Low machine tool hydraulic pressure is used to produce a high pressure supply saving both energy and space.

      Well-proven applications:
      • 夹具和支撑缸
      • Rail clamping on machine centres
      • Unclamping of spindle heads
      • Rotating knives and clamps on turning machines