导航 ：EXPO21XX>体液21XX>H01: Hydraulic Systems> MiniBooter液压药
miniBOOSTER Hydraulics
  • Offer Profile
  • MiniBooster®液压压力助推器通过将低系统压力变成20 - 5,000 bar的高压范围，提供了各种专用解决方案，可降低成本。

    我们拥有一系列全面的液压增强剂，覆盖了12个强度比，最高5,000 bar，并使用包括自来水在内的几乎所有介质流动到70 l/min。

    miniBOOSTER is ISO 9001 certified
产品介绍

  • 助推器，油

    • HC1

      • HC1versions：9不同的强化因素
      • pIN：20 – 200 bar (inlet pressure)
      • pH：800 bar最大
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • 安装：Inline tube
      • 配件：飞行员操作的垃圾箱可用

    • HC2

      • HC2版本：11不同的强化因素
      • pIN：20 – 200 bar (inlet pressure)
      • pH：800 bar maximum
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • 安装：Inline tube
      • 配件：飞行员操作的垃圾箱可用

    • HC2D

    • 最多是音量的2.5倍
      • HC2D版本：12 different intensification factors
      • pIN：20 – 200 bar (inlet pressure)
      • pH：800 bar最大
        (outlet pressure)
      • p返回：尽可能低（返回坦克的压力）
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • Mounting：内联管
      • Accessories：飞行员操作的垃圾箱可用

    • HC2pBooster Pump

      • HC2P版本：10 different intensification factors
      • pIN：0.4 bar vacuum to 2 bar in suction line (inlet pressure)
      • pH：800 bar最大
        (outlet pressure)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • Mounting：内联管
      • 旋转速度：至少1200分钟-1/最大3,000分钟1
      • Starting torque：最大限度。starting torque 0.14 Nm
      • power Consumption：87 W
      • Accessories：飞行员操作的垃圾箱可用

    • HC3

      • HC3版本：11不同的强化因素
      • pIN：20 – 200 bar (inlet pressure)
      • pH：500 bar maximum
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • 安装：NG6 (D03) stacking manifold system
      • 配件：飞行员操作的垃圾箱可用

    • HC3-C

      • HC3版本：11不同的强化因素
      • pIN：20 – 200 bar (inlet pressure)
      • pH：500 bar maximum
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • 安装：NG6 (D03) stacking manifold system

    • HC3-D

      • HC3- D versions:11不同的强化因素
      • pIN：20 – 200 bar (inlet pressure)
      • pH：500 bar maximum
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • 安装：Manifold system miniBOOSTER pattern
      • 配件：飞行员操作的垃圾箱可用

    • HC3-F

      • HC3- F versions：11不同的强化因素
      • pIN：20 – 200 bar (inlet pressure)
      • pH：500 bar maximum
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • 安装：Manifold system miniBOOSTER pattern
      • 配件：飞行员操作的垃圾箱可用

    • HC3-H

      • HC3- H版本：11不同的强化因素
      • pIN：20 – 200 bar (inlet pressure)
      • pH：500 bar maximum
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • 安装：NG6 (D03) stacking manifold system
      • 配件：飞行员操作的垃圾箱可用

    • HC3-i

      • HC3- I versions:11不同的强化因素
      • pIN：20 – 200 bar (inlet pressure)
      • pH：500 bar maximum
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • 安装：NG6 (D03) stacking manifold system
      • 配件：飞行员操作的垃圾箱可用

    • HC4

      • HC4版本：9不同的强化因素
      • pIN：20 – 200 bar (inlet pressure)
      • pH：800 bar maximum
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • 安装：Inline tube
      • 配件：飞行员操作的垃圾箱可用

    • HC5

      • HC5versions:11不同的强化因素
      • pIN：20 – 200 bar (inlet pressure)
      • pH：800 bar maximum
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • 安装：Inline tube
      • 配件：飞行员操作的Dumpvalves Incorporated
        High Pressure in two directions

    • HC6

      • HC6版本：9不同的强化因素
      • pIN：20 – 200 bar (inlet pressure)
      • pH：800 bar maximum
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • 安装：Inline tube
      • 配件：飞行员操作的垃圾箱可用

    • HC6D

      • HC6D版本：9不同的强化因素
      • pIN：20 – 200 bar (inlet pressure)
      • pH：800 bar maximum
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • 安装：Inline tube
      • 配件：飞行员操作的垃圾箱可用

    • HC7

      • HC7版本：5个不同的强化因素
      • pIN：20 – 200 bar (inlet pressure)
      • pH：2000 bar最大值
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • 安装：Inline tube
      • 配件：飞行员操作的垃圾阀合并

    • HC8

      • HC8版本：5个不同的强化因素
      • pIN：20 – 200 bar (inlet pressure)
      • pH：2,000 bar maximum
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • 安装：Inline tube
      • 配件：飞行员操作的垃圾箱掺入压力表/传感器连接可用

    • HC9

      • HC9version:1 intensification factor
      • pIN：20 – 200 bar (inlet pressure)
      • pH：5,000 bar maximum
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • 安装：Inline tube
      • 配件：飞行员操作的垃圾箱可用

  • Stainless Boosters

    • HC2W

      • HC2Wversions:11不同的强化因素
      • pIN：入口压力20-200 bar
      • pH：800 bar maximum
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • 安装：Inline tube
      • 配件：飞行员操作的垃圾箱可用

    • HC4W

      • HC4W versions:9不同的强化因素
      • pIN：入口压力20-200 bar
      • pH：800 bar maximum
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • 安装：Inline tube
      • 配件：飞行员操作的垃圾箱可用

    • HC7W

      • HC7W版本：5个不同的强化因素
      • pIN：20 – 200 bar (inlet pressure)
      • pH：最大2,000栏
        media > 5 cSt (mm2/s）
      • pH：最大1,000栏
        media < 5 cSt (mm2/s）
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • 安装：Inline tube
      • 配件：飞行员操作的垃圾阀合并

    • HC8W

      • HC8W versions:5个不同的强化因素
      • pIN：入口压力20-200 bar
      • pH：2,000 bar maximum
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
      • 安装：Inline tube
      • 配件：飞行员操作的垃圾阀合并
        pressure gauge/transducer connection available

  • Boosters, Dual Media

    • HC2D2

      • HC2D2版本：9不同的强化因素
      • pIN：20 – 200 bar (inlet pressure)
      • pH：800 bar maximum
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
        强度比与媒体2的入口压力有关，
        the values in the table are measured at 1 bar on media 2
      • Drain connections:最大限度。5 bar
      • Mounting：内联管

    • HC6D2

      • HC6D2版本：9不同的强化因素
      • pIN：20 – 200 bar (inlet pressure)
      • pH：800 bar maximum
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
        强度比与媒体2的入口压力有关，
        the values in the table are measured at 1 bar on media 2
      • Drain connections:最大限度。10条
      • Mounting：内联管

    • HC6D2W

      • HC6D2W版本：9不同的强化因素
      • pIN：20 – 200 bar (inlet pressure)
      • pH：800 bar maximum
        (outlet pressure)
      • p返回：As low as possible (Return pressure to tank)
      • 强度比：pH=
        (PIN– P返回）我（强化）
        强度比与媒体2的入口压力有关，the values in the table are measured at 1 bar on media 2
      • Drain connections:最大限度。10条
      • 安装：Inline tube

  • 增强器系统

    • M-HC6 (up to 500 bar)

    • M-HC6是一个完整的，现成的，高流量和高压增强器系统。该系统基于MiniBooter HC6增强剂，并包括一个积分的高流量旁路和隔离阀。
      • pIN= 20–350 bar
        （入口压力）
      • pH=500 bar
        (Outlet pressure)
      • 问=100 L/min
      • 重量：23 kg

    • M-HC6D

    • The M-HC6D is a complete, ready-to-install, high-flow and high-pressure intensifier system. The system is based on the miniBOOSTER HC6D intensifier and includes an integral high-flow bypass and isolation valves.
      • pIN= 20–350 bar（入口压力）
        pH= 500 bar（出口压力）
        问=100 L/min
        重量：32,3公斤

    • M-HC7（最多800 bar）

    • The miniBOOSTER M-HC7 Portable Intensifier System is a rugged unit designed for demanding industrial applications. The M-HC7 can be used with any low pressure (20 to 200 bar) power source providing a minimum flow of 2 lpm. Output pressure as high as 800 bar. Reliability is a primary design consideration. The M-HC7 is equipped with a 10-micron filter and a visual filter condition indicator. Service life is extended and down-time avoided.

    • M-HC7 (up to 2,000 bar)

    • The miniBOOSTER M-HC7 Portable Intensifier System is a rugged unit designed for demanding industrial applications. The M-HC7 can be used with any low pressure (20 to 200 bar) power source providing a minimum flow of 2 lpm. Output pressure as high as 2000 bar. Reliability is a primary design consideration. The M-HC7 is equipped with a 10-micron filter and a visual filter condition indicator. Service life is extended and down-time avoided.

  • 配件 - 过滤器

      • 在线过滤器

      • Description
        液压内过滤器可在最高350 bar的液压系统中提供保护。

      • High Pressure T-filter

      • Description
        This filter provides protection in hydraulic systems up to 800 bar.

      • T-filter

      • Description
        This T-filter provides protection in hydraulic systems up to 350 bar.

      • 过滤器外壳

      • Description
        该在线过滤器可在最高200 bar的液压系统中提供保护。

      • NG6过滤器

      • Description
        This filter provides protection for NG6 block systems up to 200 bar.

  • 配件 - 阀门

      • CV1

      • Description
        The CV1 is a cartridge style directional valve which can be directly mounted to the miniBOOSTER. It is made for use with cartridges conforming to the C-10-4 standard. Both manual operated and solenoid operated valves are available.

      • CV2 - 与PRV

      • Description
        CV2结合了一个减压阀（PRV），以控制到小型焦点的入口压力，并选择了孔口的选项，以减少入口流量到所选的强度比的最大值。

      • CV3 – with Control Valve & PRV

      • The CV3 incorporates a Pressure Reducing Valve (PRV) to control inlet pressure to the miniBOOSTER, an optional orifice to reduce inlet flow to the maximum allowed for the intensification ratio selected, and a 4/3 Control Valve to direct flow in the forward, dump, and neutral positions.

      • CV4 - 带有过滤器和PRV

      • CV4结合了10微米过滤器元件，以保护小型植物，一个减压阀（PRV），以控制到小型焦点的入口压力和一个光孔，以将入口流量减少到所选强度比的最大值。检查阀在转储周期中保护过滤器免受回流。

      • CV5 – with Sequence Valve

      • The CV5 incorporates a sequence valve which allows fast forward movement of a cylinder, by directing the full inlet flow to pass directly through the miniBOOSTER until the set pressure has been reached. Hereafter the sequence valve opens and the booster starts oscillating. The unit will automatically stall when end pressure on high pressure side H is reached.

  • 配件 - 电源包，其他

      • 液压电源包PP-HC7-12XX系列

      • 压力高达3,000 bar。
        The PP-HC7 series offers a compact high pressure pump in a rugged steel frame. Reliability is our primary design consideration which is why the units are equipped with 2 off 10 micron filters with a visual indicator and an hour meter for planned maintenance.

      • Hydraulic Power Pack PP-HC7-12XXPV Tower

      • 压力高达2,000 bar
        PP-HC7塔系列提供了一个紧凑的高的总统sure pump in a rugged steel frame. Reliability is our primary design consideration which is why the units are equipped with a Pilot controlled Check Valve which leads return oil directly to the tank with a minimum pressure drop, plus 2 off 10 micron filters with a visual indicator and an hour meter for sheduled maintenance.

      • 适配器套件

        • 歧管适配器套件
        • Adapter plates
        • Nuts and brackets

      • pOV-2000 Pilot Operated Check Valve

      • The POV-2000 is a high pressure pilot operated check valve designed for use with high pressure cylinders, being able to return high volume of oil with minimum pressure loss.
        The unit contains a screen that will protect the valve from dirt from high pressure side. The unit is weighing only 2.5 k

  • 申请

  • How does miniBOOSTER work?
    MiniBooster的振动助推器。它们会自动加剧系统压力，从而带来更高的出口压力，并将补偿高压侧的油损失。MiniBooter的此功能基于我们的专利系统。

    • Mobile Applications

    • miniBOOSTER is commonly used to supply high pressure to attachments where small cylinders and high force are required.
      The miniBOOSTER can utilise the low pressure vehicle hydraulic system to supply high pressure to operate high pressure tools, compared to using expensive high pressure pumps with flexible hoses.

      经过良好的应用：
      • Mini demolition tools
      • pile drivers
      • 人工升降机的工具

    • Offshore Applications

    • MiniBooter通常用于紧凑尺寸的套管和ROV工具中，可靠性至关重要。越来越多的子系统需要高压350–800 bar。
      miniBOOSTER offers a well proven solution which can be installed directly where high pressure is needed.

      经过良好的应用：
      • 井口控制面板
      • Casing Tongs
      • Rough Necks
      • ROV工具（切割，压接，螺栓张紧器）
      • Blowout preventors
      • 井下安全阀

    • 液压电源包应用

    • miniBOOSTER is commonly used in Power Packs generating high pressure and noise free operation. Power Packs equipped with miniBOOSTERs are capable of supplying high flow and pressure up to 3,000 bar. Keeping system cost and noise level very low (64 dBa) miniBOOSTER adds great value to your Power Pack.
      经过良好的应用：
      • 螺栓张紧器
      • Nut Splitters
      • 扭矩扳手
      • 铁路工具
      • Test Stands
      • Rescue Tools
      • 工人

    • 铁路申请

    • MiniBooter通常用于铁路维护工作，提供了一种廉价且可靠的方法来获得700 bar高压。
      根据现有的液压电源，提供120-160 bar MiniBooster的液压电源会产生高压：拉/推动轨道分开以进行焊接，抬起轨道并弯曲轨道。

      经过良好的应用：
      • Rail Road Stretchers
      • Cutting Tools
      • 电源包
      • 压接工具

    • Rescue Applications

    • miniBOOSTER通常用于救援车辆公关oviding 350 to 630 bar for cutting spreading and lifting tools. The miniBOOSTER pressure intensifier can be mounted on the PTO of any rescue vehicle providing a reliable, fast and quiet High-Pressure source to existing rescue tools.
      下一代救援工具
      通过将小型级液压增强剂集成在救援工具中，您可以将提供的低压增加到700 bar或更多，并受益于工具上的较高力和较薄的工具主体。
      Cutting through the next generation of safe cars, protected with composite filled metal tubes, will be piece of cake. The rescue personnel will enjoy working with the super flexible, low pressure hoses (< 200 bar) which additionally will provide less risk of hose burst and potential high pressure oil injection injuries. The advantage counts less hassle, carrying the heavy petrol driven power pack, to the place of accident. On top of that the rescue operation will be almost noise free, creating less stress for the victim and rescue personnel.

    • 工人申请

    • MiniBooster通常用于操作夹具和支撑钳子在劳动系统中。低机床液压压力用于产生高压供应既节省能量和空间。

      经过良好的应用：
      • Clamp and support cylinders on pallets
      • Rail clamping on machine centres
      • 纺锤头的脱离
      • 旋转刀和夹具在转弯机上