LMI pumps are used to inject precise quantities of a chemical product in a treatment process.
PD Series metering pump is the new standard in water treatment, includes an improved drive design, all new electronics, and proven FASTPRIMEÂ liquid ends.
Mechanically Actuated Diaphragm Electromagnetic Pump
Mechanically Actuated Diaphragm Electromagnetic Pump
Mechanically Actuated Diaphragm Electromagnetic Pump
紧凑的G系列包括三个模型nd lightweight dosing pumps, and can handle a very wide range of flow rates. These pumps are recommended for low discharge pressures: G Series models are multi-purpose dosing pumps and can handle all known reagents. They are designed for continuous service day in and day out and can run dry without any damage to the pump.
The PTFE diaphragm is directly linked onto the moving parts of the mechanism (the slide and the variable eccentric). This technology allows G Series dosing pumps to cope with high suction head conditions.
G Series dosing pumps offer a wide choice of liquid end materials which are compatible with most chemical substances - such as: polypropylene (PP), PVDF, stainless steel, high viscosity, fluorinated liquids, slurries...
The GA series is the most compact and efficient model of the Milton Roy series G.
The GM series is made of metal. These pumps are offering a wide range of applications with up to 3 identical or different liquid ends.
The GB series is also made of metal with a housing made of cast aluminum.
The A & B models of the mROY dosing pumps are hydraulically operated diaphragm pumps for precise injection of chemical substances.
MAXROY dosing pumps are especially designed for pumping specific products, including viscous products.
Primeroyal series pumps combine robust, field-proven technology, flexible design, and chemical delivery accuracy, making these metering pumps suitable for a large number of industrial processes. The pumps feature a variable eccentric drive that enables precise control of the pump delivery rate while meeting or exceeding industry standards for steady-state accuracy and repeatability.
Air operated double diaphragm pumps (AODD) are operated by compressed air or nitrogen.Thus, the AODD pumps are perfectly suited to be used in a wide variety of industries.
The operation of an air operated double diaphram pump (short: AODD pump) creates a pulsating flow caused by the oscillating movement of the diaphragm. By installing an active pulsation dampener the pulsation can be easily reduced resulting in a constant flow rate for a safe process.
VDA agitators are fitted with a high-efficiency marine propeller. It's direct power drive offers simplicity. These mixers are designed to work 24 hours per day, seven days a week. The VDA is a multipurpose mixer due to a simple but efficient impeller and high speed, allowing for a powerful jet and rapid dissolution of powders.
VRP agitators are equipped with a gear reducer and a solid shaft, designed to run 24/7. It's a simple design with removable turbine blades (it's position can be adjusted along the shaft).
VRH搅拌机都配有低足迹齿轮再保险ducer, with several models life lubricated, they are designed to run 24/7.
For the same pumping flow rate, we note an energy saving of over 70% - the cost effective reduction is excellent. The blade mounting is simplified and safer.
IMA mini is designed for industrial applications in particular. The Impulse-Measuring-Analysis unit is an all-inclusive device offering an enormous variety of features as well as an intuitive menu-driven handling and a robust housing while providing a very attractive price-performance-ration.
Are you searching for a way to measure one or even more parameters within your process in order to automate and optimize your process? You just came to the right place! Our extensive portfolio of "Measuring & Control Technology" includes probably every product you may need for the task "water treatment" (process water, industrial water, wastewater, drinking water, ...).
PID controller (optionally as 1-channel or 2-channel controller) with intuitive user interface, display and SD memory card for recording of measured data + alarms.
pid控制器,特别是电感(contactless) conductivity measurements, with SD memory card for documentation of measured values and alarms.
Our analogue controllers measure the actual value, compare the measured value to a pre-set target value, and consequently control the associated dosing systems until the desired value has been reached.
Our basic controller is a measuring and control device for conductivity or pH-measurements with less features than our all-inclusive high-end device Universal Controller, but thus more cost-effective. It can be used for automatic control of a dosing pump or alternatively as a display device with 0/4 ... 20 mA output signal for a higher-level PLC.
The measurement converter Signoscript is a measuring and display device with 4 ... 20 mA output signal for a higher-level PLC.
A significant industry trend of the past few years is the automatically controlled dosing of the chemicals based on specific measuring parameters – manually pre-set, static dosing belongs to the past.
Our measuring and control technology products are here to automate your process by measuring a pH and/or conductivity value within your tank or basin, and subsequently control the dosing pump just as needed via a controller.
Our dosing boxes offer numerous safety advantages for operation:
Pinch valves are used to control the flow of abrasive, corrosive and fibrous fluids and provide a leak-proof seal when closed.
They provide a leak-proof seal in use with liquids, viscous media such as suspensions, granules, pastes, powders, dust, ...
Our dosing tanks are made of high-quality plastic (PE) and are resistant to almost all common chemicals, UV-stable for use in outdoor area and food-safe. They have a liter scale and a special bridge for the installation of agitators or dosing pumps. Tanks are available in numerous sizes from 60 ... 3,000 liter.
In addition to plain dosing or storage tanks for liquids that you need to be dosed into your process, we are happy to offer pre-assembled, ready-to-use dosing skids. The following options are just a few examples of the various possibilities:
Storage tanks or preparation processes often require a slow, fast or even continuous mixing. Upon request we can pre-install mixers onto the appropriate dosing or storage tanks, reinforce the dosing tanks's top with mounting plates, install wave breakers for an optimal mixing result if necessary, and equip the tanks with (optical + electronic) level indicators, drain ball-valves and much more.
Our containment bunds are seamlessly made of high quality plastic (PE) and have a high load bearing capacity. They are resistant to almost all common chemicals and are UV-stable and suitable for outdoor application. Most of the pallets have a DIBt approval (German Institute for Construction). The spill containment pallets consist of a collecting space and, optionally, a high load-bearing grate in the bath height (grates can be removed). Available in standard pallet sizes up to 2000 x 1200 mm.
Customized solutions, perfectly fit to your specific needs, are our daily business: we are able to design a complete and ready-to-use package unit including dosing equipment, assembled onto a panel, maybe supported by a stainless steel base frame, readily assembled with the matching sump/containment pallets.