Knife gate valves, Check valves, Dampers, Gates for Associated industry. Chemical Industry, Mining Valves, Solid pumping management, Food industry, Water treatment, Dams, Power plants, Thermal power stations, Energy generation.
Check valves WAFER swing or tilting disc (can be manufactured with flanges on request). One‐piece cast body which provides easy evacuation of solid particles contained in the fluid. Face‐to‐face dimension in accordance with CMO standard. It has an arrow on the body indicating the flow direction. Can be supplied with auxiliary spring to obtain faster sealing. For high water loads or large valve diameters hydraulic damping systems can be incorporated which reduce the valve’s impact in the sealing. The R check valve allows the fluid to flow through in one direction, it is opened by the fluid passing through and it closes due to the weight of the disc and the return of the fluid.
Gas valve, with square or rectangular damper design.
Unidirectional guillotine damper.
Various seat and packing materials available.
Face‐to‐face distance in accordance with CMO standard.
Gas valve, with round damper design.
Unidirectional guillotine damper.
Various seat and packing materials available.
Face‐to‐face distance in accordance with CMO standard.
This guillotine damper valve is suitable to work with a large range of airs and gases.
Dámper mariposa distribuidor 3v para montaje entrebridas estanqueidad relativa.
Cuerpo y disco mecanosoldado en función del diámetro.
El grado de estanqueidad de esta válvula es del 99%.
Materiales de fabricación: acero S275JR, acero HII, acero 16MO3, diferentes gamas de aceros inoxidables (aisi 304, 316, 310 …).
En función de la aplicación.
Round damper butterfly valve, with bidirectional design.
专为气力输送的空气或气体t different temperatures.
Option of manufacturing “WAFER” type or with bored flanges.
Watertight integrity between 97% and 99%.
From DN 80 up to DN 3000 (larger sizes on request). Check with C.M.O. for the general dimensions of a specific damper butterfly.
Round damper butterfly valve, with bidirectional design.
专为气力输送的空气或气体t different temperatures.
Option of manufacturing “WAFER” type or with bored flanges.
Watertight integrity between 97% and 99%.
Damper de mariposa de doble clapeta con ventilador, puede ser con bridas o wafer.
Esta válvula está diseñada, con el fin de crear una cámara estanca en el interior de la doble clapeta, por medio de la presión del ventilador, consiguiendo así la estanqueidad del 100 % de lado a lado de la clapeta.
Cuerpo y disco en fundición o mecanosoldado en función del diámetro.
El grado de estanqueidad de esta válvula es del 100%.
Materiales de fabricación: acero S275JR, acero HII, acero 16MO3, diferentes gamas de aceros inoxidables (aisi 304, 316, 310 …). En función de la aplicación.
The louver damper is composed of various blades which each turn on the central shaft. The ends are joined to the pipes via flanges. Normally, the louver damper is supplied as one piece, except in those applications in which the dimensions of the equipment require special transport.
Construction
The body of the PL damper is machine welded and can be made of different materials. The standard construction sizes range from 150×150 mm (minimum) to 3000×3000 mm although larger sizes are available on request. The blades are made flat, with reinforcing ribs and are supported on two semi‐shafts. The flat blade system is sufficiently rigid for the working pressures of these valves and they do not produce significant load losses.
The PL dampers have two types of seals. Depending on the application you can choose between: Swing‐thru (97% seal), for environments with high dust concentrations, the metal/metal seal (99% seal) and the step‐seat joint for other applications that require greater watertight integrity, reaching 100% with air chamber sealing.
The SC damper is composed of a blade which turns on a shaft located on one side (like a gate). The ends are joined to the pipes via flanges. Normally, the SC damper is supplied as one piece, except in those applications in which the dimensions of the equipmentrequire special transport.
The body of the SC damper is machine welded and can be made of different materials. The standard construction sizes range from 150×150 mm (minimum) to 3000×3000 mm although larger sizes are available on request. The blade is made flat, with reinforcing ribs and is supported on two semi‐shafts. The flat blade system is sufficiently rigid for the working pressures of these valves and they do not produce significant load losses.
Gas valve, with square or rectangular single-bladed tamper design.
Butterfly type tamper, unidirectional.
Multiple sealing and packing materials available.
Distance between faces according to CMO standard.
This butterfly valve is suitable for working with a wide range of air and gases.
It is especially indicated as an insulation element to allow inspections, maintenance and repairs of ducts.
MAINLY USED IN:
Cement plants - Steel plants - Power plants.
Chemical plants - Energy sector.
From 125 x 125 to 3000 x 3000 (larger dimensions on request).
To find out the general dimensions of a specific pipe, please consult CMO
The standard maximum working pressure is 0.5 kg/cm 2 , for higher pressures on request.
Lugged knife gate valve, manufactured with one piece monoblock body, supported gate with guides for back flows.
Knife gate valve unidirectional wafer design. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure drop and include various seat and packing materials available. Face to face dimension in accordance with CMO standard. An arrow is marked on the body indicating the flow direction. This knife gate valve is suitable for liquids that contain a maximum of 5% suspended solids. If it is used for dry solids in gravity feed applications it should be installed with the arrow on the body pointing in the opposite direction to the flow.
这把刀闸阀适用于液体contain a maximum of 5% suspended solids. The valve it is used for dry solids in gravity feed applications it should be installed with the arrow on the body pointing in the opposite direction to the flow. Designed for applications such as:
Paper Industry, Mining, Silo emptying, Chemical plants, Bumping Food, Industry Sewage treatment.
Standard manufacturing sizes: From DN50 up to DN1400
– DN 50-250 = 10 bar – DN 300-400 = 6 bar – DN 450 = 5 bar
– DN 500-600 = 4 bar – DN 700-1600 = 2 bar
Bidirectional wafer-design knife gate valve. One-piece cast body. Provides high flow rates with low pressure drop. Various seat and packing materials available. Face-to-face dimension in accordance with CMO standard.
Knife Gate Valve uni-directional, Wafer style. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops.
Paper Industry
MiningChemical
BumpingFood
IndustryWater treatment
DN50 a DN2000
bigger diameters under request.
Knife Gate Valve, Wafer style, bidirectional knife gate valve. Cast body, composed by two bolted parts, with inside sliding guides to provide a smooth operation. High flow rates with low pressure drops. Several seat and packing materials available.
Square or rectangular shaped knife gate valve.
Welded construction manufacturing.
Various seat and packing materials available.
Unidirectional flanged knife gate valve (bidirectional option to order), designed for high pressure applications, with self‐cleaning seal.Single piece die‐cast body with screwed‐down bonnet and wedges to guarantee the seal. Provides high flow rates with low pressure drop. Various seal and packing materials available.
The gate valve is suitable for working with clean liquids or liquids with a concentration of solids:
Drying plants, Paper industry, Water Treatment, Chemical Plants
Food sector, Mining, Oil extraction, Sludge.
DN50 a DN2000
Larger sizes to order.
PN 2,5 to PN 100
Each valve is designed according to work conditions
Unidirectional knife gate valve with wafer design. With round input and square output. Body made up of two screwed‐down halves, with slides to provide smooth operation. Provides high flow rates with low pressure drop. Various seal and packing materials available.
One‐piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure drop. Various seat and packing materials available. Face‐to‐face dimension in accordance with CMO Valves standard. It has an arrow on the body indicating the flow direction. Usually mounted under a hopper, to prevent any kind of solids accumulating on the seat, has a special body design and it is assembled with the body arrow in the same direction as the fluid. When a knife gate valve remains open for long periods of time and the body’s internal walls are parallel a very large torque is usually required to close it. However, the inside of the body of model F is cone‐shaped, which provides greater space and, this way, when the valve is closed the solids stored inside it can be easily removed.
This knife gate valve is suitable for working with dry products like powder and grain. It is generally used for gravity discharge of dry solids. Designed for the following applications: -Mining ‐Silo emptying ‐ Electrical power stations ‐ Chemical plants ‐ Food Industry
Unidirectional wafer‐design knife gate valve.
Monobloc cast body with interior slides for optimum movement of the through conduit during operation and seal wedges.
Provides high flow rates with low pressure drop.
The lower part of the body has two holes for cleaning.
Various seal and packing materials available.
Bidirectional knife gate valve. Valve suitable for use as end-of-line.The GA valve body is a single monobloc piece. Stainless steel through-conduit gate. Two rubber sleeves. The main characteristic of this slurry valves is that it provides a full continuous flow. This means that in open position it produces no cavities and there is no turbulence in the fluid. The stem protection hood is independent from the handwheel securing nut, this means the hood can be disassembled without the need to release the handwheel. This advantage allows regular maintenance operations to be carried out, such as lubricating the stem, etc. The CMO valve stem is made from stainless steel 18/8. This is another additional benefit, since some manufacturers supply it with 13% chrome, which quickly rusts. The operating wheel is manufactured in nodular cast GJS-500. Some manufacturers supply it in common cast-iron, which can lead to breakage in the event of very high operation torque or a bang. The yoke has a compact design with the bronze actuator nut protected in a sealed and lubricated box. This makes it possible to move the valve with a key, even without the handwheel (in other manufacturers’ products this is not possible). The pneumatic actuator’s upper and lower covers are made of GJS-400 nodular cast iron, making them highly shock resistant. This characteristic is essential in pneumatic actuators.
Thats knife gate slurry valves are suitable for working in the mining industry, in loaded fluid transport lines such as water with stones, sludge, etc, and, in general, for abrasive fluids in the chemical industry and waste water.
Designed for the following applications:
Slurry valves for Mining, Sewage treatment, Electrical power stations
Chemical plants, Energy sector, Thermal power stations
DN50 a DN1500
Larger sizes to order.
DN50 a DN600 10 kg/cm2
DN700 a DN1400 6 kg/cm2
DN1500 2 Kg/cm²
The pressures indicated in the table can be used in either of the valve’s two directions.
Slurry valve for very loaded products with solids, used for suspended matter in mining. It does not present neither salient nor any split in the pipe. It is not needed any joint between the flanges as it is incorporated in the body.
双向晶片设计刀闸阀。
Monoblock one‐piece cast iron body.
Stainless steel gate. Two rubber sleeves.
Provides high flow rates with low pressure drop.
Various seat materials available.
This valve main characteristic is that it provides a full continuous flow.
The GD valve’s body is composed of one single “monoblock” piece.
If it is used for dry solids, slurry in gravity feed applications it should be installed with the arrow on the body pointing in the opposite direction to the flow.
This Slurry valve are designed for applications such as:
Paper Industry, Mining Slurry Valves, Silo emptying, Chemical plants, Bumping Food, Industry Sewage treatment, Slurry treatment.
Standard manufacturing sizes:
From DN50 up to DN600
Bigger diameters under request.
双向晶片设计刀闸阀。“莫诺block” one‐piece cast iron body. Stainless steel gate. Two rubber sleeves.Provides high flow rates with low pressure drop.
This knife gate valve is suitable for working in the mining industry, in loaded fluid transport lines, such as: water with stones, sludge, etc.
Mining ‐ Sewage treatment ‐ Electrical power stations ‐ Chemical plants ‐ Energy Sector ‐ Thermal power stations
ND80‐3″ to ND900‐36″
(Larger sizes on request).
The pressures indicated in the table, can be used in either of the valve’s two directions.
Maximum PN ND80‐3″ to ND900‐36″ 21 kg/cm2 = 300 psi
Unidirectional knife gate valve. One‐piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure drop. Various seat and packing materials available. Face‐to‐face dimension in accordance with CMO standard. It has an arrow on the body indicating the flow direction
Bidirectional knife gate valve. Two‐piece cast body, joined by screws, with internal guides for smooth movement of gate during operation.
Provides high flow rates with low pressure drop. Various seat and packing materials available.
Face‐to‐face dimension in accordance with CMO standard.
Unidirectional “LUG” guillotine slurry knife gate valve, designed in accordance with standards TAPPI TIS 405‐8 and MSS‐SP‐81.
Monobloc cast body with interior slides for optimum movement of the gate during operation.
Provides high flow rates with low pressure drop. Various seat and packing materials available.
Face‐to‐face dimension in accordance with TAPPI standard.
Bidirectional Slurry knife gate valve with “wafer” design.
Two‐piece cast body, joined by screws, with internal guides for smooth movement of through conduit during operation.
Provides high flow rates with low pressure drop. Various seal and gasket materials available.
Distance between faces in accordance with Standard UNE‐EN 558 Basic Series 20.
This knife gate valve is suitable for working with clean liquids or liquids with a concentration of bland solids:
Drying plants ‐ Paper Industry ‐ Sewage treatment ‐ Chemical plants
Food industry ‐ Mining ‐ Oil extraction ‐ Sludge.
Narrow groove sliding penstock for high‐speed fluids.
Mechanically welded body, comprising two screwed parts, with internal guides for smooth movement of the penstock during operation.
Penstock design carried out in accordance with “U.S. BUREAU OF RECLAMATION”.
Passage of the rectangular section penstock, although there is also the possibility of the inlet and outlet having a circular section.
Various construction materials available.
Face‐to‐face distance in accordance with CMO standard.
Swing gate which turns on a vertical shaft located at one end of the stopboard.
Gate designed to divert the flow..
Stopboard design with a support wheel, to reduce the lever effect on the rotation shaft.
Design of square or rectangular penstock.
Various sealing materials available.
Designed to install embedded in concrete or mounted on walls with chemical or expansion anchors.
The swing gate is designed for installation in channels. The channel can be rectangular or square in section, and this penstock can have a 3 or 4 side sealing, since it is designed to divert the flow.
It is suitable to work with clean liquids or loaded with solids.
The valve will be installed in vertical position perfectly aligned with the actuator.
Must be avoid stresses in the body of the valve, because of an incorrect aligned with the discharge pipe.
Is not necessary any specific instructions for the operation of the valve. The valve will be opened an closed,
Slowly or quickly. Obviously, must be avoid any excessive effort.
The valves are appropriated for regulation as the stroke can be regulated in any intermediate position
From DN50 up to DN1500 (larger sizes on request). Check with C.M.O. for the general dimensions of a TE telescopic valve.
Maximum working pressure depends on the valve stroke and is equal to the difference between the maximum and minimum level required for the pond.These units adapt to the customer’s requirements in each project, and are designed to meet the working conditions in the final location.
Penstock design for covering big surfaces and high water columns.
设计的门侧车轮,它帮助啊n the manoeuvrability of the penstock at high water columns.
Square or rectangular designs available.
Unidirectional and bidirectional versions available.
Multiple seat materials available.
Designed for installing embedded on concrete or fitted on wall by mechanical/chemical anchors.
Round multilouvre damper butterfly valve, shutter type, with bidirectional design.
专为气力输送的空气或气体t different temperatures.
Option of manufacturing “WAFER” type or with bored flanges.
Watertight integrity between 97% and 99%.
这些multilouvre挡板蝶阀是西装able to work with a wide range of air and gases. They are particularly suitable for controlling the flow of gas in pipelines. Used mainly in:
Cogeneration plants, Thermal power stations, Electrical power stations, Chemical plants, Energy sector.
From DN 400 up to DN 3000 (larger sizes on request). Check with C.M.O. for the general dimensions of a specific round multilouvre damper butterfly.
Maximum standard work pressure is 0.5 kg/cm2; greater pressures upon request.
MULTIPLE FIXED CONE VALVES
Standard construction with body and sleeve in carbon steel with stainless steel sliding side.
DN150 a DN2000 (Larger sizes on request)
Specially designed to be fitted in installations for the transport of fine‐grained solid fluid like cement, ash, sand, etc.
Unidirectional knife gate valve, with wafer design and quick opening and closing. Body made up of two screwed‐down halves, with slides to provide smooth operation. It has two opposing gates which come together in the centre of the mouth, and all the components which are liable to deteriorate can be easily replaced.
This knife gate valve is designed to work in the most demanding conditions, it being commonly used in the paper industry in pulp facilities and purification plants, rejecting soft lightweight materials such as plastic.
DN50 to DN1200 (larger sizes to order).
DN50 to DN250 10 kg/cm2
DN300 to DN400 6 kg/cm2
DN450 5 Kg/cm
DN500 to DN600 4 Kg/cm
DN700 3 Kg/cm
DN800 to DN1200 2 Kg/cm
Cone seated sampling valve. One piece integral cast body with bolted flange to be welded to the main pipeline.
The TM sampling valve is manufactured fully in AISI316 stainless steel. It is composed by three main parts: welding flange with neck, valve body and operating system.
Seat valve with opening or closing by spring.