Videos
Loading the player ...
  • Offer Profile
  • ANMOPYC - The Best Foreign Trade Promotional Tool.

    The Spanish Manufacturers´ Association of Construction, Public Works and Mining Equipment, ANMOPYC, is a sector, private and non ? lucrative organisation founded in the year 1982 with the purpose of defending the interests of the Spanish Construction, Public Works and Mining companies as well as contributing to strengthen their presence in foreign markets.

Product Portfolio
  • Lifting, transport and handling equipment

      • Site lifting

          • Winches

          • Nominal lifting capacity from 800 Kg. up to 3200 Kg. and maximum traction capacity from 1250 Kg. up to 5000 Kg.
          • Hoists and electric wire rope elevators

          • Lifting machine for loads up to 500kg between floors.
          • Wire rope lifting equipment: site lifts for materials

          • Monocylinder wire rope lifting equipment from 100 up to 1.500 Kg.
          • Mast climbing equipment: working platforms and site lifts for materials an people by Alba

          • Material hoists: Load capacity from 550 to 1500 kg. Maximum height up to 100 metres. Vertical speed 24 m / minute, Rack mast climbing work platform: Single and twin mast with maximum load capacities from 1600 to 4550 kg and up to 140 metres height. Maximum vertical speed 7.5 metres per minute.
          • Mast climbing equipment: working platforms and site lifts for materials an people by Alher

          • Working platforms, weigh capacity up to 1.300 KG. Site lifts up to 12 people. Working platforms with several sizes and load capacities.
          • Mast climbing equipment: working platforms and site lifts for materials an people by Encomat

          • Iza 30/100 platform with both possibility of configurationmono-mast or bi-mast. With 3500 kg of loadcapacity and height of 100m. Iza 1500 site lift for materials, able to load up to 1500kg. Iza 550 site lift for materials, designed for building constructionsor rehabilitation. Iza 1000 PAX site lift for materials and people, with aload capacity of 1000Kg./8 people.
          • Mast climbing work platforms and site lifts for materials and people by Camac

          • Self mounting cranes

          • Self erected cranes. Transport with axels for building sites or for the road.
          • Luffing-jib cranes LCL Series by Linden Comansa

          • Maximum loads from 12 to 30 tonnes. 12 models of luffing-jib cranes, designed under Linden Comansa's modular concept.
            Models:
            • LCL 165 8t:
            • LCL 165 12t:
            • LCL 190 12t:
            • LCL 190 18t:
            • LCL 280 12t:
            • LCL 280 18t:
            • LCL 280 24t:
            • LCL 310 12t:
            • LCL 310 18t:
            • LCL 500 24t:
            • LCL 500 30t:
          • Tower and luffing jib cranes by Jaso

          • Four lines of high quality, which are determinated for the best characteristics to include the differents solutions for each type of works and constructions.
          • Tower and luffing jib cranes by Liebherr

          • The EC-B flat-top crane series comprises well-staggered models from 30 to 250 mt. The series is topped off by the 250 EC-B 12 Litronic
          • Tower cranes LC1100 Series

          • 6 models design under Linden Comansa's Flat-Top modular system. Maximum Loads between 5 and 8 tonnes.
            11 LC 90 5t:
            - - - - - -箴言um load: 5 tonnes
            - - - - - -箴言um jib length: 52,5 metres
            - - - - - -箴言um load at the end of the jib: 1.200 kg
            - - - - - -箴言um freestanding height: 47,2 metres

            11 LC 90 6t:
            - - - - - -箴言um load: 6 tonnes
            - - - - - -箴言um jib length: 52,5 metres
            - - - - - -箴言um load at the end of the jib: 1.200 kg
            - - - - - -箴言um freestanding height: 47,2 metres

            11 LC 132 5t:
            - - - - - -箴言um load: 5 tonnes
            - - - - - -箴言um jib length: 60 metres
            - - - - - -箴言um load at the end of the jib: 1.200 kg
            - - - - - -箴言um freestanding height: 59,2 metres

            11 LC 132 6t:
            - - - - - -箴言um load: 6 tonnes
            - - - - - -箴言um jib length: 60 metres
            - - - - - -箴言um load at the end of the jib: 1.200 kg
            - - - - - -箴言um freestanding height: 59,2 metres

            11 LC 150:
            - - - - - -箴言um load: 8 tonnes
            - - - - - -箴言um jib length: 60 metres
            - - - - - -箴言um load at the end of the jib: 1.700 kg
            - - - - - -箴言um freestanding height: 59,2 metres

            11 LC 160:
            - - - - - -箴言um load: 8 tonnes
            - - - - - -箴言um jib length: 65 metres
            - - - - - -箴言um load at the end of the jib: 1.400 kg
            - - - - - -箴言um freestanding height: 59,2 metres
          • Tower cranes LC1600 Series

          • 7 models of Flat-Top tower cranes from Linden Comansa, with maximum loads of 8, 10 and 12 tonnes
            16个信用证185 8t:
            - - - - - -箴言um load: 8 tonnes
            - - - - - -箴言um jib-length: 65 meters
            - Jib-end load: 1.950 kg
            - Max. freestanding height: 65 meters

            16个信用证185 10t:
            - - - - - -箴言um load: 10 tonnes
            - - - - - -箴言um jib-length: 65 meters
            - Jib-end负载:1.800 kg
            - Max. freestanding height: 64.5 meters

            16个信用证185 12t:
            - - - - - -箴言um load: 12 tonnes
            - - - - - -箴言um jib-length: 64,5 meters
            - Jib-end负载:1.800 kg
            - Max. freestanding height: 64.5 meters

            16个信用证220 10t:
            - - - - - -箴言um load: 10 tonnes
            - - - - - -箴言um jib-length: 65 meters
            - Jib-end load: 2.150 kg
            - Max. freestanding height: 64.5 meters

            16个信用证220 12t:
            - - - - - -箴言um load: 12 tonnes
            - - - - - -箴言um jib-length: 65 meters
            - Jib-end load: 2.150 kg
            - Max. freestanding height: 64.5 meters

            16个信用证260 10t:
            - - - - - -箴言um load: 10 tonnes
            - - - - - -箴言um jib-length: 70 meters
            - Jib-end load: 2.150 kg
            - Max. freestanding height: 64.5 meters

            16个信用证260 12t:
            - - - - - -箴言um load: 12 tonnes
            - - - - - -箴言um jib-length: 70 meters
            - Jib-end load: 2.150 kg
            - Max. freestanding height: 64.5 meters
          • Tower Cranes LC2100 Series

          • Linden Comansa's biggest family, formed by 10 Flat-Top models. Maximum loads from 12 to 28 tonnes.
            21 LC 335 12t:
            - - - - - -箴言um load: 12 tonnes
            - - - - - -箴言um ljib length: 74 metres
            - - - - - -箴言um load at the end of the jib: 2.700 kg
            - - - - - -箴言um freestanding height: 64,9 metres
            - Special freestanding height: up to 99 metres

            21 LC 335 18t:
            - - - - - -箴言um load: 18 tonnes
            - - - - - -箴言um ljib length: 74 metres
            - - - - - -箴言um load at the end of the jib: 2.700 kg
            - - - - - -箴言um freestanding height: 64,9 metres
            - Special freestanding height: up to 99 metres

            21 LC 400 12t:
            - - - - - -箴言um load: 12 tonnes
            - - - - - -箴言um ljib length: 80 metres
            - - - - - -箴言um load at the end of the jib: 3.000 kg
            - - - - - -箴言um freestanding height: 96,8 metres

            21 LC 400 18t:
            - - - - - -箴言um load: 18 tonnes
            - - - - - -箴言um ljib length: 80 metres
            - - - - - -箴言um load at the end of the jib: 3.000 kg
            - - - - - -箴言um freestanding height: 96,8 metres

            21 LC 550 12t:
            - - - - - -箴言um load: 12 tonnes
            - - - - - -箴言um ljib length: 80 metres
            - - - - - -箴言um load at the end of the jib: 4.000 kg
            - - - - - -箴言um freestanding height: 87,9 metres
            - Special freestanding height: up to 95 metres

            21 LC 550 18t:
            - - - - - -箴言um load: 18 tonnes
            - - - - - -箴言um ljib length: 80 metres
            - - - - - -箴言um load at the end of the jib: 4.000 kg
            - - - - - -箴言um freestanding height: 87,9 metres
            - Special freestanding height: up to 95 metres

            21 LC 550 24t:
            - - - - - -箴言um load: 24 tonnes
            - - - - - -箴言um ljib length: 80 metres
            - - - - - -箴言um load at the end of the jib: 3.350 kg
            - - - - - -箴言um freestanding height: 86,4 metres
            - Special freestanding height: up to 93,5 metres

            21 LC 750 24t:
            - - - - - -箴言um load: 24 tonnes
            - - - - - -箴言um ljib length: 80 metres
            - - - - - -箴言um load at the end of the jib: 7.000 kg
            - - - - - -箴言um freestanding height: 80,9 metres

            21 LC 750 36t:
            - - - - - -箴言um load: 36 tonnes
            - - - - - -箴言um ljib length: 80 metres
            - - - - - -箴言um load at the end of the jib: 7.000 kg
            - - - - - -箴言um freestanding height: 80,9 metres

            21 LC 750 48t:
            - - - - - -箴言um load: 48 tonnes
            - - - - - -箴言um ljib length: 80 metres
            - - - - - -箴言um load at the end of the jib: 6.500 kg
            - - - - - -箴言um freestanding height: 80,9 metres
          • Tower cranes LC500 Series

          • 8 different models of Flat-Top tower cranes from Linden Comansa, with maximum load of 4 and 5 tonnes
            5 LC 3510 4t:
            - - - - - -箴言um load: 4 tonnes
            - - - - - -箴言um jib length: 35 meters
            - - - - - -箴言um load at the end of the jib: 1.000 kg.
            - - - - - -箴言um freestanding height: 52 meters

            5 LC 3510 5t:
            - - - - - -箴言um load: 5 tonnes
            - - - - - -箴言um jib length: 35 meters
            - - - - - -箴言um load at the end of the jib: 1.000 kg
            - - - - - -箴言um freestanding height: 52 meters

            5 LC 4010 4t:
            - - - - - -箴言um load: 4 tonnes
            -最大悬臂长度:40米
            - - - - - -箴言um load at the end of the jib: 1.000 kg
            - - - - - -箴言um freestanding height: 52 meters

            5 LC 4010 5t:
            - - - - - -箴言um load: 5 tonnes
            -最大悬臂长度:40米
            - - - - - -箴言um load at the end of the jib: 1.000 kg
            - - - - - -箴言um freestanding height: 52 meters

            5 LC 4510 4t:
            - - - - - -箴言um load: 4 tonnes
            - - - - - -箴言um jib length: 45 meters
            - - - - - -箴言um load at the end of the jib: 1.000 kg.
            - - - - - -箴言um freestanding height: 53,3 meters

            5 LC 4510 5t:
            - - - - - -箴言um load: 5 tonnes
            - - - - - -箴言um jib length: 45 meters
            - - - - - -箴言um load at the end of the jib: 1.000 kg
            - - - - - -箴言um freestanding height: 53,3 meters

            5 LC 5010 4t:
            - - - - - -箴言um load: 4 tonnes
            - - - - - -箴言um jib length: 50 meters
            - - - - - -箴言um load at the end of the jib: 1.000 kg
            - - - - - -箴言um freestanding height: 50,3 meters

            5 LC 5010 5t:
            - - - - - -箴言um load: 5 tonnes
            - - - - - -箴言um jib lkength: 50 meters
            - - - - - -箴言um load at the end of the jib: 1.000 kg
            - - - - - -箴言um freestanding height: 50,3 meters
          • Load and unload materials platforms by Dacame

          • Frontal platform with trap door.
          • Load and unload materials platforms by Maquiobras

          • Hydraulic freight elevators

          • Wire rope lifting equipment, load capacity: 750, 1.000 and 1.500 Kg.
          • Hoists and electric wire rope elevators by Umacon

          • Hoists and electric wire rope elevators by Ayerbe

          • Chain block from 500 to 5000 Kg. Swiss chain hoist from 500 to 5000 kg with one or two speeds.
          • Hoists and electric wire rope elevators by Camac

          • Hoists and electric wire rope elevators by Maquiobras

          • MA Model with load capacity up to 1000 kg. and lifting speed of 23m/min.
          • Elevator supports

          • Adjustable elevators with spring or ring. 1500/2000 kg. TEL elevator moveable 1500 kg. Pallet elevator support with ring.
        • Handling equipment

            • Belt Conveyors by Maquiaridos

            • Conveyor
              MAQUIARIDOS designs and manufactures totally versatile and functional modular conveyors. The MAQCONVEYORS modular system is based on two pillars: simplicity and quality.
              We have a wide range of accessories designed for their assembly into the conveyor just using bolted connections, avoiding welds and drills.
              The modularity of the conveyors can adapt the loading of the machinery for transport optimization. This system also allows easy modification or reuse of the conveyor when the life of the installation is complete.
              MAQUIARIDOS is ISO 9001certified, a Quality Management system that meets the highest requirements of the market.
            • Conveying systems by Taim Weser

            • Bulk Handling for mining and quarries, Termal Power Plants, Stockyard Machinery, Port Terminals, Shiploaders, Cement Sector, Paper Mill Sector and Industrial Plants.
            • Conveyor belts by Cintasa

            • Belt conveyors, Roller conveyors, Belt elevators, Bucket elevators by belt or chain, Elévateur à godet, par bande ou chaîne, Feeder conveyors by belt or top metallic plates, Screw conveyors.Conveyors by chains to transport great dimension or heavy products.
            • Conveyor belts by Leblan

            • Conveyors belts for aggregates and concrete plants and for general maintenance.
            • Conveyor belts by ZB

            • "Belt conveyors from 500 to 1600 mm width. Metalic conveyors"
            • Conveyor belts by Técnicas Hidráulicas

            • Conveyor belts by Miningland

            • The MININGLAND technical department has developed two complete conveyor belts systems capable of solving all the
              challenges of granular product transport.
              我们的目标是所有comp模块化和标准化onents as well as compliance with the most demanding safety and quality
              standards.
              We have standardized two types of conveyors: the Medium Series and the Heavy Series. They are both built with a hot-laminated
              profile frame. The difference between them is the sturdiness of the various parts.
            • Harbour cranes

            • Ship Unloaders. Container Cranes
            • Cranes for special works

            • Cranes for Nuclear Facilities, Power Station, Steel Works, Cement.
            • Crane steel rope sheaves

            • Manufactured of laminated steel (or forged), and afterwards welded and finished. We also manufacture sheaves of plastic, solid or molten.Sheaves: for the application of small diameters, produced with radii, made with two flanges, reinforced with stiffeners used on high responsibility machines, Pear sheaves, special models
            • Radio control equipment

            • Ergonomic design
              Impact resistant
              Maximum disturbance protection
              8 hours without recharge
              Possibility of changing frequency
              Analogue outputs with remote setting
              Internationally approved
            • Rollers and components for conveyor by Cintasa

            • Rollers and components for conveyor by Rotrans

            • Rollers and components for conveyor by Miningland

            • Miningland sells a full range of rollers for
              conveyors, manufactured in accordance with the strictest European quality standards and in compliance with DIN-22107.
              We have a large stock of rollers in various diameters and for every belt width.
            • Hand Pallets by Alba

            • Load capacity up to 1500 Kg, lifted to 200 mm maximum height. Suitable for palets of 1000 y 1200 mm. maximum width.
            • Crane couplings

            • The range of couplings includes: Couplings with convex teeth. Drum barrel couplings.
            • Electrical insulators

            • Moulded pieces
            • Crane hooks and hook-blocks

            • STANDARD CRANE HOOK BLOCKS FOR HOISTS: with one or two pulleys, with standardized hooks, STANDARD CRANE HOOK BLOCKS FOR MOBILE CRANES: until six pulleys, with standardized hooks, CUSTOM MADE CRANE HOOK BLOCKS: According to drawings provided by the customer, MOTORIZED HOOK BLOCKS: incorporates a gearedmotor.
            • Cover for conveyor belts by Capotex

            • Cover for conveyor belts by Cintasa

            • Cover for conveyor belts by Alquezar

            • Forklifts by Ausa

            • The rough-terrain forklifts, from 1100Kg up to 5000Kg are equipped with different masts heights.
            • Forklifts by Agrimac

            • Rough Terrain Forklifts:

              Hydrostatic Drive (4x4): 1.200, 1.600, 1.700, 2.100, 2.500, 3.000, 3.500 Kgs
            • Electric feedings for mobile motors

            • Festoon systems, multipole insulate conductor systems, materials for unguarded conductor systems, cables, cable glands and cable reel.
          • Transport vehicles, semi-trailers and components

              • Seats for machinery

              • Agricultural Seats. Industrial Seats. Garden Seats
              • Light trucks

              • DV 17, DV 17C: Multiservice vehicles with hydraulic tipping system and with hydraulic hook and arm loading and unloading system. Capacity of 1500 kg, DT 250: New multiservice vehicle robust and easy handling with a capacity of 2500 kg, DVH 250: New multiservice vehicle with hydrostatic transmission and a capacity of 2500 kg
              • Dumpers and dump trucks by AUSA

              • AUSA offers site dumpers from 1T to 10T, with rigid or articulated chasis, and mechanical or hydrostatic transmissions.
              • Dumpers and dump trucks by Agrimac

              • Dumpers:

                - Mechanical Drive: (4x2 and 4x4): 1.600 Kgs.

                - Hydrostatic Drive (4x4): 1.200, 1.600, 1.700, 2.100, 2.500, 3.000, 3.500 Kgs.
              • Windshield wiper systems

              • MOTORS from 10 Nm up to 130 Nm.
                WIPER BLADES from 250 mm up to 1400 mm.
              • Plastic Tanks

              • Plastic tanks for automotive applications.
                Standard, special or made-to-measure.
              • Washer systems

              • Wide range of tanks and accessories.
                Tank capacities from 1 l up to 40 l in 12 or 24 v.
                Specialists in customized projects.
              • Air systems

              • Industry and automotive.
                Electrofans and blowers in 12, 24 V or customized.
                Heaters in 12, 24, 110, 220, 360 or 600 V.
                Specialists in plastic air ducts.
              • Gas springs

              • Maximum versatility in assembly.
                Large variety of connect terminals.
                A range of accessories that facilitate assembly even in complicated spaces.
              • Window lift systems

              • Original equipment solutions.
                Small and medium production runs.
                Maximum stroke up to 650 mm.
              • Dc motors

              • Customized
                Motors from 2.5 to 1.500 W in 12, 24 and up to 72 V.

                Reduction gear motors
                With worm reduction gear ratio ranging from 12 to 81:1
                With epicyclic reduction gear ratio ranging from 4 to 308:1

                External rotor traction motors
                From 2 to 8 kW in 48 and 72 V.
              • Stamping

              • Specializing in automotive and industrial applications.
                Large presses park (15 to 1.250 t).
                International presence: Spain, Poland and China.
            • Road Equipment

                • Construction

                    • Light compaction equipment

                    • Machinery of slight compaction: rammers, plate compactors and vibrant rollers. Its main application is in auxiliary works of compaction (ditches, repairs of roads, sidewalks, parks, etc.)
                  • Maintenance

                      • Sweepers

                      • 120-RMB Compact road sweeper with mechanical transmission and hopper capacity of 400 l 120-RMB x4 Compact 4x4 road sweeper with mechanical transmission and a hopper capacity of 400 l 200-RHB 4x4 road sweeper with hydrostatic transmission and hopper capacity of 1000 l 200-RMB 4x4 road sweeper with mechanical transmission and a hopper capacity of 1000 l.
                      • Cutting floor saws by ALBA

                      • Cutting floor saws 3600 rpm. maximum speed. 150 and 160 mm. cut maximum depth and 25.4 mm disc shaft maximum diameter.
                      • Cutting floor saws by DURHER

                      • With blade capacity from Ø350 to Ø1200mm. Vertically adjustable. With electrical, petrol or diesel engine. Milling machines: Drum of 200mm. width, with changeable setting. Vacuum cleaner can be adjusted. With electrical or petrol motors. Drilling machinery: different types of supports with 1 or 2 speeds, and fixed or interchangeable racks.
                    • Concrete

                        • Equipment and plants for precast products

                            • Plants for precast products by Moldtech

                            • Folding tables. Runs universal. Various molds (pillars, hang gliders, canals, etc..)
                            • Plants for precast products by Poyatos

                            • Poyatos offers a wide range of complete installations to make blocks and other concrete products, with different levels of automation and output, comprising batching plants, stationary presses and handling and cubing equipment. The "modular" vibration system, patented by Poyatos, is an effective and fast system.
                            • Plants for precast products by Prensoland

                            • Fully automized installations. Productions: 12.000-30.000 blocks/ shift. Models available: COMPACTA 2000 SPRINT, COMPACTA 3000, EUROCOMPACTA and COMPACTA 6000.COMPACTA 600: the smallest of the automatic vibro-press installations, with production capacity up to 6.000 pieces/shift
                            • Plants for precast products by Resimart

                            • Shaping Machine, Cutter Machine, Wires Pulling Machine, Concrete Bed Cleaner, Parking Machine, Shaper Machine, Lift and Carrying Machine, Additional Machinery, Heated Beds, Stressing Machinery
                            • Machines for production of beams and alveolar by Prensoland

                            • The TENSYLAND machines provide a versatile and low maintenance system for the production of beams and hollow core slabs. With the Continuous Moulding machine and auxiliary equipment: Bed cleaners, Cutting Saws, Wire Pullers, Stressing units, etc. it is posible to produce more than 1.000 lineal metres of beams per man and shift.
                            • Machines for production of beams and alveolar by Resimart

                            • Splitters

                            • Machines to manufacture face sight blocks, combining different colours and patterns. Several models, with semiautomatic or automatic operation. Also possible automating the complete line. Model E-600. Semiautomatic. Model A-600/4.Automatic.
                            • Machines for the production of frames for reinforced concrete tubes

                            • Press breaking test for concrete pipes controlled by computerwith software program for the control of productions.
                            • Concrete pipes making machines

                            • Revolving machine for fabrication of concrete piecesmanhole base units, square boxes, covers, curb stones, canals.
                            • Block laying machines

                            • AUTOCOMPACTA: Block laying machines able to produce up to 10.000 blocks per shift working on concrete beds and available in semi or automatic.
                            • Revolving machines for fabrication of concrete pieces

                            • Straight and with bell part up to 100 cm inner ø by 1,20 m useful length. With and without reinforcement up to 300 cm inner ø by 2,50 m useful length. For fabrication of manhole base units concrete pipes up to 150 cm inner ø, square boxes, etc.
                            • Equipment for concrete tubes crack resistance testing

                            • Machine automatic and manual for fabrication of iron cagesfrom 30 cm to 300 cm inner ø y 3,00 m of useful length.
                          • Preparation and production

                              • Concrete mixer with Diesel engine

                              • Diesel engine concrete mixers - perfect mixing, high output, high returns.

                                - The drum is driven by a crown wheel and runs on head-treated rollers.

                                - Gear reducer unit in oil bath, carburized hardened steel drive pinion.

                                - Fitted on permanently greased sealed bearings.

                                - Exact-measure water dose with stop cock and additional hose for daily cleaning.

                                - Centralized fault-proof electrical control unit.

                                - Hydraulic elevation of the loader. Heavy-duty cylinder with hard chrome-platted rood.

                                - Scrapper with sealed button and 24 V. tension for maximum safety.

                                - The diesel model UTI-450 D, can be used in worksites within or without electric wiring´s installation due to its diesel motor
                              • Self-loading mixers

                              • 500 - rmx x4 4 x4混凝土搅拌与混合capacity of 500 l.500-RMX Concrete mixer with a mixing capacity of. 500 l. 1100-RMX Concrete mixer with a mixing capacity of 1100 l
                              • Concrete plants by Leblan

                              • Equipments for the production of concrete.
                              • Concrete plants by Triman

                              • Stationary and mobile concrete plant with or without mixer and concrete recycler.
                              • Concrete plants by Maprein

                              • Stationary and mobile concrete plant with or without mixer and concrete recycler.
                              • Dosing and testing equipment by Leca, S.L.

                              • Laboratory equipment to control and test construction materials

                              • Compression Testing Machines, Triaxial Test, CBR Test, Marshall Test, Jolting table, Proctor/CBR Compactor, Marshall compactor, Sieves, Ovens and Moulds for concrete, cement, soils
                              • Mixers by Poyatos

                              • Hoppers, feeders, dosing groups (either by volume or by weight), conveyor belts, mixers, etc, all controlled by its own PLC and terminal of data access to keep in the memory the recipes with the different dosing for each product.
                              • Electric cement mixers PRO 90

                              • Cement mixerts with electric engine.

                                - High-drawn steel plate drum and heavy-duty steel tube frame.

                                - Fitted with a silent running lubricated steel gear reduction unit.

                                - Can be fitted with a single-phase 220 V. motor Optional 125 V.

                                ——具有“快速和安全”元素的过程when mounted on the end of the chassis, extends the suport travel of the machine, guaranteeing the full dischargue of the mass in a safe and easy manner.

                                - The PRO 90 (collapsible) can be dismantled for easy transport and is quick to assemble. It´s furnished in a 655 x 595 x 705 box.

                                - The PRO 90 PLUS has a heavy duty steel tube frame made of only one piece.
                              • Electric concrete mixer Promix-150

                              • More than just a concrete mixer. A partner to make any job easier.

                                - Fitted with a silent running lubricated steel gear reduction unit.

                                - Safe and simple assembly. It´s furnished in a box.

                                - Full discharge of the mass in a safe easy manner.

                                - It´s size and design let manipulate in confined spaces.

                                - It´s provided with a special device to avoid the involuntary drum´s unload.

                                - Full dischargue of the mass
                              • Self-loading mixers

                              • Concrete, Crusher Mixers.
                              • Silent Concrete Mixer US-160

                              • Silent concrete mixer made totally of top-quality pressed, electro-welded steel.

                                ——强化鼓bottom, with high performance mixer blades.

                                - All mechanisms, including the reducer, are hermetically protected, and maintenance-free.

                                - Silent-running motor-reducer, easily dismantled.

                                - Electric motor with a thermical protection, designed for high temperatures.

                                - High-strength, very stable frame for handling with a forklift truck.

                                - The special flywheel system in the PLUS models, ensuring maximum smoothness of rotation.

                                - The US-160 model incorporates a pedal operated tip lock.
                              • Tractor Concrete mixers UTRAC 160-220

                              • Agricultural concrete mixers.

                                - Runs on the tractor like any other implement.

                                - Bearing mounted. All parts carefully mechanised.

                                - Works on the ground, driven by any motorized attachment.

                                - Can be carried over any terrain fitted on the tractor with no wheel or front leg.
                            • Concrete Recycling

                                • Concrete, crusher recycling by Alquezar

                              • Transport and proyection

                                  • Cement and dry-mix transporter for mining

                                  • CEMKRET 8
                                    The low-profile cement and dry-mix transporter for mining CEMKRET 8, with a transport capacity of 8,25 tons, is useful for underground mining operations with an on-site concrete plant. Due to the four electric vibrators and the capacity of the two discharging augers, the time needed to unload the material is reduced to a minimum.

                                    The 6-cylinder, 130 kW (174 HP) engine provides great climbing and driving power, as well as the possibility to use the equipment at great height. The Diesel engine has an AAC (Automatic Altitude Compensation) system that enables its operation at high altitude offering the same performance. A compact design with state-of-the-art axles, both directional and powered, offers great mobility and maneuverability through galleries and tunnels with small cross sections.

                                    In order to guarantee full safety during down slope routes CEMKRET 8 includes an automatic speed regulation system, which allows traveling at full load with total safety as well as a combination of service brakes in both axles multidisc in oil bath and a hydrostatic holding system ensuring a safe and speedy transport.
                                  • Concrete buckets and agitators

                                  • D.T. Bucket. Bottom discharge, 150/1000 L. Double pouring D.T bucket, 250/500 L. Suspending bucket, 65/150 L
                                  • Concrete mixer for mining

                                  • Low-profile concrete mixer for mining MIXKRET 5

                                    The low-profile concrete mixer for mining MIXKRET 5, with a maximum concrete capacity of 5m3 completes the concrete spraying process. The 6-cylinder, 168 kW (225 HP) engine provides great climbing and driving power, as well as the possibility to work it at great height.

                                    The Diesel engine has an AAC (Automatic Altitude Compensation) system that enables its operation at high altitude with the same performance.

                                    A compact design with heavy-duty axles, both directional and powered, offers great mobility and maneuverability through galleries and tunnels with small cross sections. The Integrated Continuously Variable Drive (ICDV) with geared motor has electronically controlled continuous variation and ensures the correct relationship between engine torque and speed, reducing fuel consumption and noise levels.

                                    The service brakes in both axles are multidisc in oil bath, hydraulically driven with two independent circuits. This system provides great braking power and long work life, even under the most demanding conditions. Additionally, the equipment includes a negative-coupling parking brake and a brake unblocking system to tow it if necessary.
                                  • Low-profile concrete mixer for mining

                                  • MIXKRET 4
                                    The low-profile concrete mixer for mining MIXKRET 4 with a 4m3 concrete capacity completes the concrete spraying process. The 6-cylinder, 130 kW (174 HP) engine provides great climbing and driving power, as well as the possibility to work it at great height. The Diesel engine has an AAC (Automatic Altitude Compensation) system that enables its operation at high altitude offering the same performance.

                                    A compact design with heavy-duty axles, both directional and powered, offers great mobility and maneuverability through galleries and tunnels with small cross sections. The Integrated Continuously Variable Drive (ICDV) with geared motor has electronically controlled continuous variation and ensures the correct relationship between engine torque and speed, reducing fuel consumption and noise levels. The service brakes in both axles are multidisc in oil bath, hydraulically driven with two independent circuits. This system provides great braking power and long work life, even under the most demanding conditions. Additionally, the equipment includes a negative-coupling parking brake and a brake unblocking system to tow it if necessary.
                                  • Concrete spraying equipment

                                  • SPM 4210 WETKRET
                                    The SPM 4210 WETKRET series is ideal for small and medium section tunnels and galleries. Its spraying arm provides 10 m spraying reach. The dual cable and wireless proportional remote control permits easy handling of the arm movements, besides regulation of the concrete flow of 20 m3/h and adjustment of the additive dosage.

                                    The standard version of the SPM 4210 WETKRET series is operated electrically and is optionally available with an electric or diesel air compressor built into the chassis

                                    The Putzmeister concrete pump mounted on the equipment guarantees high performance, low pulsations and a long life for the wear parts. The proportional remote control permits full regulation of the concrete output as well as adjustments to the predefined additive dosage, to cope with the changing working conditions in underground mines. The synchronized additive pump is equipped with an automatic dosing device proportional to the concrete flow, thereby assuring spraying accuracy and quality. The heavy-duty chassis with state-of-the-art axles and a reinforced turning system provide great maneuverability.
                                  • Concrete Spraying system

                                  • SPM 500 WETKRET
                                    The standard version of the SPM 500 WETKRET series is operated electrically and includes an electric air compressor built into the chassis. The equipment is also optionally available with a diesel drive system, allowing operation in places without electrical power supply. Controlled by remote control with an automatic spray lance movement and nozzle oscillation, the operator can fully concentrate on spraying finish quality. The remote control includes automatic spraying sequence start and stop functions (air, concrete and additive) and permits full regulation of the concrete output, as well as adjustments to the predefined additive dosage.
                                    The automatic system for high precision synchronization between the concrete pump and the additive dosing unit maintains the additive dosage proportional to the concrete flow, assure spraying accuracy and quality. The sturdy chassis with 4-wheel-drive, 4-wheel steering and crab-mode provides maneuverability in difficult driving situations.
                                  • Piston pump for concrete spraying

                                  • SPM 715 SYNCHRO
                                    The piston pump SPM 715 Synchro is ideal for hand-held concrete spraying work in tunneling and mining.

                                    Equipped with a hydraulic additive dosing unit which synchronizes the additive dosage with the concrete flow, the machine is available as a stationary (version SE and SD) or trailer pump (version TE and TD). With its road-going chassis, transportation and on-site maneuvering could not be easier. It is available with electric motor (version TE and SE) or Diesel motor (version TD and SD) to fit the requirements of all construction sites.

                                    The PLC controls the automatic synchronization of the additive dosage with the concrete flow. The peristaltic additive pump provides a wide working range from 40 to 400 l/h, with the pumping values immediately checked on the PLC’s display.
                                  • 混凝土搅拌机在卡车和半拖车

                                • Finishing

                                    • Concrete Vibrators by Enar

                                    • Equipment of internal concrete vibration to apply in all type of concrete applications (walls, grounds, pillars, prefabricated, etc.).
                                    • Vibration screeds by Ayerbe

                                    • 2 meters plate compactor with 2 strokes ROBIN engine with 0.8 Hp power.
                                    • Vibration screeds by Enar

                                    • Equipment of superficial concrETE, CRUSHER vibration to apply in pavings and horizontal surfaces.
                                  • Quarries, mining and recycling

                                      • Components and auxiliary equipment

                                          • Wheels and axels for mining cars

                                          • Manufacture of wheels, axles and parts for rail transport equipment.
                                          • Components for crushers by Ebroacero

                                          • Screening meshes in polyurethane

                                          • Screening meshes in polyurethane INAPRENE®
                                            POLYURETHANE SCREENING SYSTEMS AND HIGH-PERFORMANCE SCREENING INE-FLOW™ MESH
                                          • Striking arms

                                          • The most effective solution for dry screening without plugging.
                                            灵活,移动Inaprene®聚氨酯引人注目arms + Ine-Flow polyurethane screens for high performance screening.
                                          • Gears

                                          • We do offer a very comprehensive data base with thousands of different bevel gear references for your different applications.
                                          • Steel pipes coated in polyurethane

                                          • Inaprene® Polyurethane-lined steel pipes
                                            THE IDEAL SOLUTION FOR TRANSPORTING HIGHLY ABRASIVE ORE SLURRY
                                        • Washing and screening

                                            • Screening and washing plants by Cintasa

                                            • Screening and washing plants by Leblan

                                            • Vibrating screeds, trommels, sedimentation equipment, etc.
                                            • Screening and washing plants by Alquezar

                                            • Screening and washing plants by ZB

                                            • "2 to 4 plant conventional screens from 3 to 14 m2 of surface. Rod separator and dyanmic grills. Centrifugal separators."
                                            • Screening and washing plants by Inelas

                                            • MODULAR TROMMEL SCREENS IN POLYURETHANE INAPRENE®
                                              This new generation of trommel screens for the mining industry manufactured by INELAS POLIURETANOS SL marks a great step forward, offering a great series of global innovations, advantages and unique features.
                                            • Metal detectors by Drago Electrónica

                                          • Recycling

                                              • Construction materials recycling by Cintasa

                                              • Construction materials recycling by Leblan

                                              • Equipments for crushing and classification of building rubble.
                                              • Construction materials recycling by ZB

                                              • Demolition and construction waste crushing, sorting and storage turnkey plants.
                                              • Construction materials recycling by Rubi

                                              • Waste grinder T-4000
                                              • Construction materials recycling by Técnicas Hidráulicas

                                              • Construction materials recycling by Alquezar

                                              • Metal waste recovering plants

                                              • Metal scrap crushing, sorting and storage turnkey plants.Metal product breakers from 10 to 100TM/h
                                              • Solid wastes treatment plants by Cintasa

                                              • Solid wastes treatment plants by Leblan

                                              • Equipments for the wastes classification, fermentation, maturation, refining, mixing and bagging of products.
                                              • Solid wastes treatment plants by Taim Weser

                                              • 城市固体废物的植物。
                                            • Crushing and feeding

                                                • Crushing plants (mobile and stationary) by Leblan

                                                • Jaw crushers and mills
                                                • Crushing plants (mobile and stationary) by Alquezar

                                                • Crushing plants (mobile and stationary) by ZB

                                                • "Jaw Crushers: Prymary and to produce gravel. Impact Crusher: Primary, Secondary and Terciary impactors. Mobile groups: Primary Mobile units wheel and chain mounted, (Jaw crushers, impactors), Secondary and Terciary Mobile Groups wheel and self supporting chasis mounted"
                                                • Crushing plants (mobile and stationary) by Técnicas Hidráulicas

                                                • Crushing plants (mobile and stationary) by Ebroacero

                                                • Feeding equipment for quarries by Cintasa

                                                • Cylindrical silos and hoppers
                                                • Feeding equipment for quarries by Leblan

                                                • Plate and band vibrating feeders.
                                                • Feeding equipment for quarries by Maquiaridos

                                                • Vibrating and band feeders.- Metal hopper.
                                                • Feeding equipment for quarries by Alquezar

                                                • Feeding equipment for quarries by ZB

                                                • "Primary tray feeders, pre-screening feeders, chain feeders, and pushing feeders. Vibrating feeders. Metalic reception hopper for heavy products. Delivery hoppers. Storage aggregate hoppers.Metalic pre-stock silos. Storage silos"
                                              • Earthmoving

                                                  • Special foundations and piling

                                                      • Drilling equipment by Llamada

                                                      • CFA Piling machines: P- 150 TT, P-130 TT, P-120 TT, P-100 TT, P-90 TT. Multifuction drilling equipment.
                                                      • Geotechnical equipment by Tecoinsa

                                                      • Drilling machines.
                                                        TP-50D on track.
                                                        TP-50/400 on truck.
                                                        TP-30 LR mounted on all-terrain vehicle.
                                                        TP-60/350 on track with side movement of pole.
                                                        TP-70/100 on track.
                                                        Penetrometer on track.
                                                    • Demolition

                                                        • Hydraulic hammers

                                                        • Light range models: AGB-175 / AGB-275 / AGB-375 / AGB-475. Weight from 170 to 475 Kg. Heavy range models: AGB-12 / AGB-16 / AGB-20 / AGB-30. From 1300 to 3300 Kg.
                                                        • Pedestal breakers

                                                        • Increase the productivity of your mill. Decrease the maintenance costs of your mill. Insure your staff safety. Possibility of remote control. Tailored made. Complete reliability Have no substitute in mines & quarries. Are designed for special applications (Founding, steel and iron industries...)
                                                      • Implements and components

                                                          • Buckets

                                                          • Miningland sells digging buckets, manufactured with certified quality materials and built to withstand the toughest working conditions.
                                                          • Cutting edges

                                                          • Cutting edges and end bits
                                                            Bulldozer blades, grader blades, made to measure cutting edges
                                                          • Fasteners quality 12.9

                                                          • Higher head. Heads 20% higher than American Standard B 18.2.1. Higher heads mean longer wear life and maximum holding for the nut.
                                                            SAE grade marks. The radial marks indicate the grade of SAE strength for better identification. Six marks on the head guarantee the quality grade 12.9 / 35-38 Rockwell (113/124 Kg./mm2)

                                                            Forged head. Provides a correct flow of the steel fibre reducing the fatigue points ensuring major resistance to bumps and an even distribution of the weight. The edges do not round off and the bolts can be reused. The washer sits perfectly below the head.

                                                            Laminated Thread. Laminated with the maximum precision BYG bolts and nuts provide a strong hold eliminating the risk of breakage.

                                                            Fine Grade Steel. The fine grade steel provides an even microstructure improving resistance and with a lower percentage of breakage.

                                                            Complete Fastening System. For better assurance and to get the maximum resistance and duration use BYG HD nuts and washers in combination with BYG fasteners
                                                          • Ground engaging tools by Etesa

                                                          • Tips, adapters, end-bits, weld-on nose, ripper shank etc... and all fasteners for the ETE, CRUSHER and CRUSHER brands. Our parts can be used for equipment such as Caterpillar, Komatsu, Esco, Case, Fiat-Hitachi, J.C.B, John Deere, New Holland, Massey Fergusson, etc.
                                                          • Ground engaging tools by BYG

                                                          • DRP teeth and adapters
                                                            DRP teeth and adapter for different brands: Atlas, Bofors, Case-Poclain, Caterpillar, Esco, Fai Komatsu, Fiat, Hensley, H&L, JCB, John Deere, Komatsu, Liebherr, Lenhoff, Orca, O&K, Pengo, Uni-Z and more
                                                          • Hydraulic breaker tools

                                                          • BYG manufactures hydraulic breaker tools
                                                            BYG manufactures hydraulic breaker tools.
                                                            BYG has great knowledge and experience in the sector. BYG is always seeking the best suppliers, raw materials and steel processing to offer high quality hydraulic breaker tools.

                                                            Made to measure hydraulic breaker tools

                                                            BYG manufactures breaker tools under your own specs.
                                                            BYG specialises in tools for special applications and non-standard hydraulic breaker tools.

                                                            Innovation

                                                            BYG is in constant search of new design solutions and treatment processes to offer the best hydraulic breaker tools on the market.
                                                          • MTG Systems

                                                          • Ground engaging tools
                                                            The excellent-quality MTG Steels are the cornerstone of all our products. MTG Systems: The combination of own fit systems that guarantee maximum reliability and a broad range of the most innovative designs on the market
                                                          • Ripper shank and components

                                                          • One-piece machine finished ripper shanks,
                                                            DRP for Caterpillar, Esco, Komatsu, Liebherr and other brands.
                                                            开膛手柄,修复段,修复鼻子,跑er teeth, ripper protectors
                                                        • Temporary Works Equipment

                                                            • Scaffolding

                                                                • Hanging scaffolds by Alba

                                                                • Up to 3 people capacity and 500 Kg of load capacity.
                                                                • Metal Scaffolding by Dacame

                                                                • Advanced scaffold systems.They are designed following the UNE 76-502-90,harmonized document HD-1000 and norm UNEEN-39. MEKA 48 (Modular scaffold system). DINO 48 (European scaffold system).
                                                                • Metal Scaffolding by Fermar

                                                                • ECC, standard scaffolding. Modular parts in steel tube.
                                                                • Metal Scaffolding by Andamios Tendo

                                                                • FRAME SCAFFOLD 0,70 AND 1 MTS. MULTIDIRECTIONAL SCAFFOLD -SEATS BLEACHERS. BOARDS SCENES -ALUMINIUM TOWERS -SHORING FOR CONCRETE -SPECIAL STRUCTURES UNDER ORDER
                                                                • Scaffolding DORPA Frame by Ulma

                                                                • The façade scaffolding
                                                                  The scaffolding is mainly composed of closed
                                                                  and open frames that, joined via ledgers, diagonal braces and platforms, form a modular structure for covering façades.
                                                              • Formworks

                                                                  • Formwork accessories

                                                                  • G Shoring, compatible with all the ULMAs Horizontal Form Work systems, it is used as well for shoring traditional formworks.
                                                                  • Formwork boards by Alsina

                                                                  • One ply panels and three-ply panels.
                                                                  • Formwork boards by Lana

                                                                  • Three-layer board: Wood panel with three layers, tongued and grooved and glued with damp-proof melamine protection. Double T Beam: Beam with OSB or plywood web and fir wood flanges. Sealed moisture-proofed edges.
                                                                  • Formwork boards by Ulma

                                                                  • Wooden Panels for Forming. These wooden panels are the base in contact with the concrete and defines as well its working period of life. There are three different types on the basis of composition and quality.
                                                                  • Formwork CC-4 Horizontal

                                                                  • A light, safe, high performance formwork that provides excellent concrete finishes
                                                                    CC-4 is a horizontal drop-head formwork system for both solid and lightened slabs in building construction.
                                                                  • Formwork ENKOFORM H-120

                                                                  • The flexible horizontal formwork for bridge decks
                                                                    ENKOFORM H-120 formwork system consists of standard elements and is able to be adapted to different geometries in civil engineering.
                                                                  • Formworks by Alsina

                                                                  • Slab formwork, column formwork and wall formwork.
                                                                  • Formworks by Fermar

                                                                  • Recoverable ceilings shuttering. Phenolic formwork for walls.
                                                                  • Formworks by maquiobras

                                                                  • Fenolic formwork. Heavy formwork . Light formwork. Slab stopend formwork.
                                                                • Props

                                                                    • Props by Alsina

                                                                    • Light and solid telescopic props hard resistant on the jobs. Design with a versatile thread system and protected with a poxy treatment.
                                                                    • Props by Dacame

                                                                    • Standard props (3m.) and reinforced props models (3m.-4m.).
                                                                    • Props by Fermar

                                                                    • Made of heavy-duty steel tube. Thead lifting. Several measurements and thickness.
                                                                  • Auxiliary Equipment for Construction

                                                                      • Safety and signal equipment

                                                                          • Body-guard handrail and guardrails

                                                                          • Made of high quality steel and paint treatment furnace EPOXI with polyester that ensures maximum corrosion resistance.
                                                                          • Personal safety equipment by Rubi

                                                                          • Knee patches and masks, soles and protectors, gloves, safety elements, professional shoe-wear, overalls, professional clothes, equipment for the professional.
                                                                          • Personal safety equipment by Alsina

                                                                          • Signal and safety equipment by Alba

                                                                          • Safety nets: "T" system, "V"system and awnings.
                                                                          • Signal and safety equipment by Dacame

                                                                          • Barriers, safety supports for complete security network, rounded folding trestle and telescopic folding supports.
                                                                        • Auxiliary equipment

                                                                            • Hydraulic and pneumatic components by Dicsa

                                                                            • Portable and stationary compressors

                                                                            • Portable and stationary compressors for several uses: industrial, agricultural, construction, etc.
                                                                            • Generator Sets by Carod

                                                                            • Gasoline and diesel generating sets, welding generators.
                                                                            • Generator Sets by Ayerbe

                                                                            • Sound proof gasoline generators, diesel generators, mobile generators.
                                                                            • Generator Sets Agricultural Range

                                                                            • The Dagartech agricultural range, which includes generators 1500 and 3000 rpm air-cooled or water-cooled with different diesel engines and generators PTO (power take off), offer the consumer an optimized and efficient source of energy for any application of agricultural type.

                                                                              在权力范围从7到44千伏安。

                                                                              Available ranges
                                                                              • Diesel range from 6 to 40 KVA
                                                                              • Group Tractor Range (PTO) from 16 to 30 KVA
                                                                            • Generator Sets Industrial Range

                                                                            • A robust and compact design, production processes compliant with the highest standards, together with the use of internationally renowned components, guarantee a reliable operation and a long service life for the equipment, even in the harshest working conditions.

                                                                              The DAGARTECH Industrial Range includes a high level of equipment as standard, in order
                                                                              to ensure a safe and easy adaptability of the products to different applications and levels
                                                                              of demand.

                                                                              Available in a power range from 10 to 700 KVA

                                                                              Available ranges
                                                                              • Opened industrial range
                                                                              • Soundproof industrial range
                                                                            • Generator Sets Portable Range

                                                                            • Dagartech portable range is characterized by offering to the user a high equipment in all versions; basic, residential, professional, construction and welding, which allows the use in all environments where mobility is required. With a wide range of optional to satisfy your needs.

                                                                              Available in a power range from 2 to 15 KVA.
                                                                            • Industrial range

                                                                            • Inmesol has designed an industrial range of electrical generators as a solution which covers a wide range of powers. With a solid construction, a result of the R&D team’s continuing research, and developing new protection elements against adverse environmental agents such as high temperatures (up to 50º), heavy rain and snow.
                                                                            • Portable Range by Inmesol

                                                                            • It is essentially characterised for being lightweight and easy to move. Its operation is optimum in those places where a power supply is occasionally required. This, together with a wide variety of options such as systems for plug kits, transport kit, etc., make perfect work equipment.
                                                                            • Portable Range by Pramac

                                                                            • When you are looking for protection against a grid outage or you need to face the rigors of a construction site, our professional tools are the right solution for you.
                                                                            • Stand-by Range

                                                                            • The generating sets in the Stand-by Range are designed to offer maximum performance in stand-by for the mains electricity supply. These devices come into operation automatically when there is a power failure, guaranteeing a reliable and efficient supply. The emergency generator sets can be used in a variety of applications such as industries, homes, hotels, restaurants, hospitals, airports, shopping areas, leisure centres, halls for concerts and celebrations, sports stadiums, military applications, telecommunications, etc
                                                                            • Lighting Towers by Inmesol

                                                                            • Our range of Lighting Towers are characterised
                                                                              by their simplicity, effectiveness and comfort,
                                                                              facilitating work in all types of installations.
                                                                            • Drilling equipment

                                                                            • We have a wide range of models to cover any drilling requirement. The equipments have wheels to facilitate its transport.
                                                                            • Hydraulic and pneumatic connectors

                                                                          • Hardware Shop

                                                                              • Hand operated forklifts by Dacame

                                                                              • Deep wheelbarrow 2 wheels fixed arm.
                                                                              • Hand operated forklifts by Fermar

                                                                              • Removable with bolts.Easy scarfing. Flashed steel bucket making a simple part, painted in the oven. Chassis in 32mm steel tube. No sharp edges.
                                                                              • Rubber and PVC devices for construction

                                                                              • Hand tools for construction by Alba

                                                                              • Lever shears, steel cutters, bolt cutters, cable cutters, terrazo cutters and lever benders.
                                                                              • Hand tools for construction by Sima

                                                                              • Hand tools for construction by Rubi

                                                                              • Manual tire and other materials cutters, greenders and dust extractors, tools for drillinf tiles, stone ware, marble, granite and other materials. Chisels, point chisels, mallets and nippers.Trowels and Jagged Trowels, Brick Trowels, Spatulas, Floats and Scrapers. Markers, templates, tile spacers and accessories for tiling.
                                                                              • Mortar Mixer UM-1600

                                                                              • Machines desinged to be used by the most demanding professionals in the construction business.

                                                                                - Ergonomic steel handle especially designed to make the machine easier to manage. Includes a soft polyurethane cover for better grip.

                                                                                - The special shape of the handle guarantees the integrity of the mixer, which is protected on the inside to guard against the direct blows which can occur on the job and during transport.

                                                                                - Speed adjustment. The revolutions can be adjusted depending on the materials to be mixed to avoid splattering.

                                                                                - Large surface switch.

                                                                                - Overload protection.

                                                                                - Stirrers: A solution for each need.
                                                                              • Portable mixers

                                                                              • These machines, fully approved and equipped with safety protection,produce perfect mixtures of large quantities of material, without effortand in just 5 minutes.
                                                                              • Mixer wheelbarrows, panels, buckets and small boilers by Dacame

                                                                              • Mortar bucket with lifting rings, mortar bucket with wheels and galvanized plaster container.
                                                                              • Mixer wheelbarrows, panels, buckets and small boilers by Umacon

                                                                              • Chaser Machines by Macroza

                                                                              • Milling cutter wall chasing machines of preofessional use
                                                                                MACROZA M-90 & SC-100 wall chasers are light & versatile, the ideal machine to work in places where a sturdy, robust and reliable machines are required. Their fast and clean cut avoids damaging the walls and material waste on the construction projects.

                                                                                MACROZA Wall Chasing machines are able to work on the following materials:

                                                                                - Solid & hollow clay brick
                                                                                - Cement block
                                                                                - Plaster walls
                                                                                - Mortar rendering walls
                                                                                - Ytong block
                                                                              • Levelling and Measuring systems

                                                                              • RUBÍ, RUBITOOLS, RUBIQUIP has a wide range of levelling systems to suit every building need. RUBÍ, RUBITOOLS, RUBIQUIP also has a wide range of different tape measures available in differentlengths and widths, all officially verified by Germans BoadaS.A. in their own metrology laboratories.
                                                                            • Equipment for building materials

                                                                                • Cutting table saws by Alba

                                                                                • Cutting table saw of overhead humid cut and wooden cutting table saw.
                                                                                • Cutting table saws by Durher

                                                                                • Pirineos series: Positionable from 90º to 45º. Ordesa series: This model has the capacity forØ300 or Ø350 mm blades. The height is adjustableand it can be set at 90° and 45°. Teide series: Designed for jobs that require an excellent finish, even porcelain tile. Moncayo. Series: Model with amoveable head and positionable from 90º to 45º.
                                                                                • Cutting table saws by Ayerbe

                                                                                • Table chopsaw with 4 cv and 3cv power.
                                                                                • Cutting table saws by Rubi

                                                                                • Power range to suit all types of materials, as well as high precision mitre cutting andother special angle cuts, in addition to accepting large formats, withheights of up to 140 mm and cutting lengths of up to 130 cm.
                                                                                • Diamond and abrasive blades by Alba

                                                                                • Diamond blades for cutting table saw and cutting machinery.
                                                                                • Diamond and abrasive blades by Durher

                                                                                • DIAMONDTIPPEDBLADES and HARD METAL CIRCULAR SAWline: We have a wide range of diamondtipped bladesand hard metal circular saws for cutting differenttypes of materials.
                                                                                • Diamond and abrasive blades by Sima

                                                                                • Diamond and abrasive blades by Rubi

                                                                                • Specific blades for all types of materials(tiles, stoneware, porcelain tiles, marble, granite, concrETE, CRUSHER...) withdifferent types of blades (continuous diamond blades, turbo diamondblades, turbo laser diamond blades, laser diamond blades with segmentrim and sintered diamond blades) with diamETE, CRUSHERrs between 4and 14â?? (115 and 350 mm.)
                                                                                • Floor polishers and cleaners by Sima

                                                                                • Ground polishers and cleaners.
                                                                                • Floor polishers and cleaners by Rubi

                                                                                • Accessories for polishers-cleaning and furbishing machines Special diamondised platelets for smoothing and polishing marble granite and terrazzo floors. Different types of diamond grain to meet every need.
                                                                                • Reinforcing steel bars: benders, cutters by Alba

                                                                                • Electric croppers: hydraulic and electro mechanic. Hydraulic croppers diamond. Light benders, automatic stirrup and programmable. Double bender systems. Bended- cropper Combined. Automatic cutting and measuring carriage. Super automatic stirrup bender. Rod straightener cutter.
                                                                                • Reinforcing steel bars: benders, cuttersby Durher

                                                                                • C系列- ElectricShears:踏板或手动操作available.D Series -Automatic Benders: Pedal or manual action available.EST-16 series - Stirrup Bender: Pedal with reinforcedcable and plug. Angle adjustment with highprecisionbolt-holder carriage. Cycle anti-repetitionsystem. COMBI Series - Bender + Shears: Pedal ormanual action available.
                                                                                • Reinforcing steel bars: benders, cutters by Sima