Hangcha Group was founded in 1956. 66 years later, Hangcha Group continues to manufacture reliable material handling equipment. Quality and innovation are two of the reasons that Hangcha Group is ranked 8th globally in sales of material handling equipment, distributes to over 180 different countries, and employs over 5,400 people.
Now, we can offer a complete fleet of material handling equipment, from 1-48t internal combustion counterbalance forklift, 0.6-48t electric forklift trucks, warehouse equipment, 3-6t side loader, empty container handler, reach stacker, AGV and much more. Our annual production capacity is more than 400,000 units thanks to the intelligent manufacturing factory. In 2021, more than 247 000 new Hangcha units were sold worldwide
Visit us on:
XE series lithium battery forklifts are high quality products developed by Hangcha on the basis of the advantages of "lithium battery special structure" and "permanent magnet synchronous technology". It has two models, one is standard model and the other is heavy-duty model.
Smooth travel: ground clearance increased, to adapt to outdoor rough roads; Flexible turning: turning radius reduced, to allow flexible shuttling in indoor environments such as cold store (optional).
Energy-saving and Efficient
The 80V double permanent magnet synchronous motor system allows higher power density, and through deep matching of the gearbox, motors and electronic controls, reduces the energy consumption by 15% to 20% than that of the traditional asynchronous motor models in the same working conditions.
Reliable and Durable
The enhanced drive axle and gearbox with the mast, steering axles with tapered roller bearing (for the heavy-duty model) and big tires for internal combustion forklifts can meet the demand of application in heavy-duty working conditions; Low center of gravity and high load margin are designed for more stable working.
由Hangcha独立开发的基础上decades of deep understanding of electric forklifts and internal combustion forklifts, the dedicated XH series high voltage lithium battery forklifts are a new series of electric counterweight forklifts.
Exterior
With the inherited exterior design of the dedicated XC lithium battery forklift and a smooth and sturdy profile, the whole vehicle is impact, elegant, stylish, sturdy and powerful.
Advancement
oth the drive and operating systems are vehicle-grade permanent magnet synchronization systems, equipped with a high-speed ratio gearbox with a driving speed, upslope degree and acceleration performance rival that of internal combustion vehicles, and the environmental performance better than that of internal combustion vehicles.
Safety
The cover of the vehicle is designed to be sealed to the water resistance level of IPX4. All the motor, electronic controls and high-voltage components reach the dust and water resistance level of IP67, a high protection level adequate to withstand harsh operating environments and ensure safety and reliability.
由Hangcha独立开发的基础上decades of deep understanding of electric forklifts and internal combustion forklifts, the dedicated XC series heavy-duty lithium battery forklifts are a new series of electric counterweight forklifts with a new energy vehicle voltage platform and a pioneered special structure that represents a breakthrough over the traditional design concept.
Comfort
The enlarged brake pedal and appropriate regenerative braking function can effectively reduce the driver’s fatigue.
Advancement
The vehicle’s 309V high-voltage platform is equipped with a long-lasting large-capacity lithium battery, which is powerful, efficient and energy-saving, adopts a super-fast charging technology that enables a short charging time, and is compatible with the automobile charging pile to enable more convenient charging.
Safety
The cover of the vehicle is designed to be sealed to the water resistance level of IPX4. All the motor, electronic controls and high-voltage components reach the dust and water resistance level of IP67, a high protection level adequate to withstand harsh operating environments and ensure safety and reliability.
Maintainability
The water tank lid can be removed quickly and easily without a tool to enable a large operating area for cleaning and maintenance.
The XH series heavy-duty high-voltage lithium battery special forklift inherits the advantages of the XH heavy-duty series and adopts the CATL standard box. This tonnage industry is the one that uses a dual-water cooling system for the motor and battery. It has super heat dissipation performance and can meet 24h non-stop operation.
Appearance
With the inherited classic exterior design of the dedicated XC lithium battery forklift and a smooth and sturdy profile, the whole vehicle is compact, elegant, stylish and sturdy.
Safe and Reliable
The cover of the vehicle is designed to be sealed to the water resistance level of IPX4 for the body. All the motor, electronic controls and high-voltage components reach the dust and water resistance level of IP67, a high protection level adequate to withstand harsh operating environments and ensure safety and reliability.
Strong Adaptability
The drive axle, steering axle and tires of internal combustion forklifts can meet the demand of high-intensity operating conditions of internal combustion forklifts. It meets all-weather operating conditions and is usable under severe operating conditions such as cold storage, heavy rains and waterlogged roads.
Convenient Maintenance
人体工学设计的汽车,和广泛的视图a large operating space makes it easier for drivers to operate; The multi-functional color screen instrument is designed to have graphic interfaces; three SPE speed gears are selectable to adapt to different operating conditions; interfaces can be switched between English and Chinese to meet the demands of customers at home and abroad.
由Hangcha独立开发的基础上decades of deep understanding of electric forklifts and internal combustion forklifts, the dedicated XH series heavy-duty high-voltage lithium battery forklifts are a new series of products with a new energy vehicle voltage platform and a pioneered special structure that represents a breakthrough over the traditional design concept.
Ultra-long Battery Life
The vehicle uses an overall controller to control the traction motor controller assembly and the driving motor controller assembly to form a highly independent, light-weighted, efficient and intelligent drive system.
Internal Combustion Condition
Both the drive and operating systems are vehicle-grade permanent magnet synchronization systems. Equipped with a high speed ratio gearbox, the driving speed, upslope degree and acceleration performance surpass that of internal combustion vehicles.
Easily Maintainable
The water tank lid can be removed quickly and easily without a tool to enable a large operating area for cleaning and maintenance.
Safety
The cover of the vehicle is designed to be sealed to the water resistance level of IPX4 for the body. All the motor, electronic controls and high-voltage components reach the dust and water resistance level of IP67, a high protection level adequate to withstand harsh operating environments and ensure safety and reliability.
由Hangcha独立开发的基础上decades of a deep understanding of electric forklifts and internal combustion forklifts, the dedicated XH series heavy-duty high-voltage lithium battery forklifts are a new series of products with a new energy vehicle voltage platform, a water-cooling lithium battery, as well as a pioneered special structure that represents a breakthrough over the traditional design concept.
Strong Adaptability
The drive axle, steering axle and tires of internal combustion forklifts can meet the demand of high-intensity operating conditions of internal combustion forklifts. It meets all-weather operating conditions and is usable under severe operating conditions such as cold storage, heavy rains and waterlogged roads.
Ultra-long Battery Life
With a 309V high-voltage platform and vehicle-grade permanent magnet synchronization system, the vehicle boasts of a smaller current, very low heat loss and more energy-efficient; The vehicle uses an overall controller to control the traction motor controller assembly to form a highly independent, user-friendly and intelligent drive system.
Safe and Reliable
The cover of the vehicle is designed to be sealed to the water resistance level of IPX4 for the body. All the motor, electronic controls and high-voltage components reach the dust and water resistance level of IP67, a high protection level adequate to withstand harsh operating environments and ensure safety and reliability.
Convenient Maintenance
人体工学设计的汽车,和广泛的视图a large operating space makes it easier for drivers to operate; The multi-functional color screen instrument is designed to have graphic interfaces; three SPE speed gears are selectable to adapt to different operating conditions; interfaces can be switched between English and Chinese to meet the demands of customers at home and abroad;
XH series high-voltage lithium battery forklifts are new series of high-voltage lithium battery forklifts independently developed by Hangcha relying on the new energy automobile voltage platform for the first time based on the deep understanding of electric forklifts and internal combustion forklifts for decades by breaking through the traditional design concept. The series of models redefine electric forklifts in terms of efficiency, power and reliability, and replace the internal combustion with electric forklifts.
Comfort
The wide-view mast with optimized design is unlikely to obstruct the operator's line of sight. The enlarged opening size of the fork carriage enables a wider view, a large operation space, and excellent ergonomic design.
Intelligentization
A vehicle central controller is provided, which has bus architecture, several built-in diagnosis and management functions and a central fault alarm function. An optional intelligent management system is provided to enable intelligent remote monitoring and easier equipment management and logistics management.
Advancement
The vehicle’s 541V high-voltage platform, equipped with a heavy truck water-cooled standard box, features better heat dissipation, longer endurance mileage and more durable battery.
Safety
The cover of the vehicle is designed to be sealed to the water resistance level of IPX4. All the motor, electronic controls and high-voltage components reach the dust and water resistance level of IP67, a high protection level adequate to withstand harsh operating environments and ensure safety and reliability.
Comfort
New designed wide view mast provides better forward view ability.
Advancement
Multi functions big LED dashboard provides running hours, battery power, and self diagnosis functions, and with high accuracy even in bad environment.
Service Ability
Full open battery cover, easy for battery service easy opened counter weight cover, to protect internal controller to avoid water and dust World famous brand electronics are applied in motor controller, contactor, power plug, emergency switch, dashboard, and accelerators.
Hangcha’s X series 1.3-1.5t three-point electric forklifts are a new series of high-efficiency, energy-saving electric counterweight forklifts with a new structure that represents a breakthrough over the traditional design concept.
Comfort
The angle of the hand wheel is adjustable and the seat can be adjusted backwards and forwards, so that the operator can choose the best driving position. Excellent ergonomic design and large operation space provide the operator with more comfort, and satisfy the operator’s needs for long-term and high-intensity operations.
Safety
The optimized design of the wide-view mast and the low dashboard enable a wide front view and higher safety, and minimizes the blind view to the greatest extent. The emergency shut-off switch equipped for the standard configuration complies with European safety standards.
Energy saving and high efficiency
Front-wheel drive; standard rubber tread tires, which are not prone to skid on slippery grounds such as puddles, sandy, sloping or cold storage grounds, etc. Efficient and convenient vehicle-mounted charger provided for the standard configuration. The vehicle is equipped with energy-saving and durable LED lights.
Advancement
AC devices, precise speed control, maintenance-free motor, temperature monitoring. The forklift is equipped with an AC controller to enable its driving, steering, lifting, tilting and other actions to be controlled by a computer.
Stability
电池和制衡安排和德signed to have a low center of gravity, respectively, the vehicle has a low center of gravity and good stability.
由Hangcha独立开发的基础上decades of deep understanding of electric forklifts and internal combustion forklifts, XH series high-voltage counterweight lithium battery forklifts are a new series of high-voltage counterweight lithium battery forklifts that first use a new energy vehicle voltage platform and represent a breakthrough over the traditional design concept. Representing a redefinition of electric forklifts in terms of efficiency, power, reliability, etc., XH series forklift models have performance and operating condition completely superseding that of the internal combustion forklifts.
Ultra Long Battery Life
A large-capacity lithium battery for the standard configuration can meet the long battery life need. Both the drive and operating systems are efficient and energy-saving vehicle-grade permanent magnet synchronization systems. High-voltage platform, less vehicle current and minimal system heat loss. Braking energy recovery effectively prolongs operating time.
Advancement
A high-torque permanent magnet synchronous motor provides strong power for the vehicle with performance indicators benchmarked against that of internal combustion forklifts.
Intelligence
A vehicle central controller is provided, which has bus architecture, several built-in diagnosis and management functions and a central fault alarm function. An optional intelligent management system is provided to enable intelligent remote monitoring and easier equipment management and logistics management.
Maintainability
The overturnable cab and electric tipping cylinder make tipping easier and more labor-saving. The wide-opened hood and removable cover better facilitate repair and maintenance of electrical components.
Safe and Reliable
The cover of the vehicle is designed to be sealed to the water resistance level of IPX4. The electrical system has high-voltage interlocking, insulation monitoring and potential balancing functions to offer vehicle-grade safety.
由Hangcha独立开发的基础上decades of deep understanding of electric products and internal combustion products, XH series high-voltage counterweight lithium battery empty container handlers are a new series of high-voltage lithium battery empty container handlers that first use a new energy vehicle voltage platform and represent a breakthrough over the traditional design concept.
Advancement
A high-torque permanent magnet synchronous motor provides strong power for the vehicle with performance indicators benchmarked against that of internal combustion forklifts. A 579V high-voltage platform with low system loss and a standard chilled water tank for heavy-duty truck to achieve good heat dissipation.
Reliable
The novel spreader has a higher reliability, a longer service life, a lower failure rate and a lower maintenance cost.
Ultra Long Battery Life
A large-capacity lithium battery for the standard configuration can meet the long battery life need. Both the drive and operating systems are efficient and energy-saving vehicle-grade permanent magnet synchronization systems. High-voltage platform, less vehicle current and minimal system heat loss.
Safety
he cover of the vehicle is designed to be sealed to the water resistance level of IPX4. The electrical system has high-voltage interlocking, insulation monitoring and potential balancing functions to offer vehicle-grade safety.
Fully-suspended All-round Vision Cab
The large-stroke bodily-movable fully-suspended cab can be repaired and maintained easily, can easily switch to the manual movement mode, and easily move.
Maintainability
The overturnable cab and electric tipping cylinder make tipping easier and more labor-saving. The wide-opened hood and removable cover better facilitate repair and maintenance of electrical components.
The RS4531CH-XHJG electric reach stacker is a newly developed product based on Hangcha’s new lithium battery platform of XH series and years of experience in R&D of internal combustion reach stacker. With the new technologies of three-phase drive motor, separate pump control, kinetic energy recovery, etc., the electric reach stacker can make quick operation response at low operation energy consumption.
Maintainability
An easy-to-remove hood; all the maintenance points are in easily accessible positions to facilitate repair and maintenance of electrical elements.
Intelligence
High-definition LCD instruments have simple graphical interfaces to display data clearly. The interfaces can be switched to be shown in Chinese and English. A vehicle central control system, which has bus architecture, and interconnected motor, battery and heat management control system.
Advancement
A high-torque permanent magnet synchronous motor provides strong power for the vehicle with performance indicators benchmarked against that of internal combustion forklifts.
Safety
The cover of the vehicle is designed to be sealed so that the protection level of the vehicle reaches level IPX4. The electrical system has high-voltage interlocking, insulation protection and monitoring, and potential balancing functions to offer vehicle-grade safety.
ELME New-generation Container Spreader
or the new-generation ELME817 series telescopic container spreader, the design of the telescopic beam, turntable, etc. are optimized, so that the structural strength is increased, the weight of the spreader is 16% less than that of the spreader of the last generation and the service life is prolonged by 30%.
高效的液压系统
Flexible and precise electric proportional control. Light load high-speed lifting increases work efficiency. Independent temperature control and the large-size hydraulic oil cooler meet the work in the environment of up to 50 degrees.
XA series four-point light-duty lithium battery forklift are qualityguaranteed cost-efficient new products with a redesigned internal structure, which inherit the classic exterior design of Hangcha’s A series products and are applicable to light-duty operation scenes.
Sylish Exterior
Inherit the classic exterior design of A series electric forklifts. With adjusted truck structure ratio, the 3t model is sturdier and works better. Colored yellow and black, it is eye-catching and stylish. It is compact but not cramped.
Comfortable Experience
The wide-view mast with optimized design is unlikely to obstruct the operator's line of sight. The interfaces can be switched to be shown in Chinese and English to meet the needs of customers at home and abroad.
Sturdy and Durable
The sturdy and durable mast, front and rear axles, and tires for internal combustion forklifts are used. With a large distance from the ground, the forklift can be easily driven on the bumpy ground outdoors. The truck uses a large number of mature parts with stable and reliable quality
Cost-efficient
Aiming at light-duty forklift users and equipped with high-end key parts instead of a plurality of optional parts, the forklift is cost-efficient and enables easy handling. A practical and convenient integrated 35A charger with a 220V charging plug is provided for the standard configuration.
XA II series 4W light-duty lithium battery forklift are quality-guaranteed cost-efficient new products with a redesigned internal structure, which inherit the classic exterior design of Hangcha’s A series products and are applicable to light-duty operation scenes.
Sylish Exterior
Inheriting the simple and natural style of the previous generation, the OHG and counterweight are optimized, the internal layout is more reasonable, and the front and rear large tires give the whole vehicle a smoother and more coordinated visual effect.
Comfortable Experience
The wide-view mast with optimized design is unlikely to obstruct the operator's line of sight. The enlarged opening size of the fork carriage enables a wider view, a large operation space, and excellent ergonomic design.
Sturdy and Durable
The sturdy and durable mast, front and rear axles, and tires for internal combustion forklifts are used. With a large distance from the ground, the forklift can be easily driven on the bumpy ground outdoors.
Cost-efficient
Aiming at light-duty forklift users and equipped with high-end key parts instead of a plurality of optional parts, the forklift is cost-efficient and enables easy handling.
覆盖模型的吨位1.3吨,1.5吨,1.6 t, 1.8t and 2.0t respectively, the new XC series three-point new energy electric forklifts are HANGCHAÂs dedicated-purpose battery forklifts subsequent to the XC series four-point dedicated-purpose battery forklifts.
Excellent Ergonomic Design
The truck has a large operation space more than 50% larger than that of the traditional three-point electric truck. The enlarged brake pedal and appropriate regenerative braking function can effectively reduce the driver’s fatigue.
Easy Operations and Maintenance
With the fully sealed hood and side plates, all major components including the electrically controlled components, motor, electrical components, etc. are sealed from dust and water. Vulnerable parts and key parts are arranged reasonably to facilitate maintenance and repair.
Advancement
高频MOSFET集成控制器sures smooth and accurate driving and lifting control, and has excellent speed regulation performance, good performance of electronic control matching the motor, functions of regenerative braking, reverse braking and anti-sliding on ramps, etc., and high safety and reliability.
Main Accessories
The main electrical components such as the motor controller, contactor, power plug, emergency cut-off switch, dashboard, accelerator, are all products of well-known foreign brands.
Comfort
The intelligent sensing enables buered descending. When the fork is 100 - 60mm away from the ground, the descending will automatically slow down, so that the goods and pallet will not hit the ground.
Comfort
Both the steering column and seat can be adjusted easily, every operator can find the best driving position.
Safety
Emergency switch is standard specification which meets the Euro safety regulation.
Maintainability
Front dual separated driving motors can realize the wheels forward or backward independently, the small turning radius is suitable for narrow channel; Imported reducer, high power driving motor provides a reliable and strong performance.
Maintenance
Full opened battery cover is easy for battery service and changing.
1.5 t系列电动崎岖的地形allet truck is mainly designed to meet the transportation needs of industries such as civil engineering and infrastructure. It has good stability and strong obstacle crossing ability, making it suitable for complex and harsh outdoor conditions, breaking through the limitations of traditional pallet trucks that are only suitable for indoor warehouses and workshops.
Comfort
Multifunctional instrument, integrated display of battery power, working hours. Pedestrian mode, adopting a low and long handle design, with low steering force and easy operation. The use of mold springs as rebound components ensures stable and reliable performance with low operating force.
Advanced and Safe
The traction and main controller with DC brushless control system, combined with a high-performance planetary gearbox, with strong power, high climbing slope, superior acceleration performance, and efficient environmental protection.
Off Road Performance
It has high passability and excellent obstacle crossing ability, which can meet the needs of outdoor off-road conditions.
Maintenance
The full opened hood makes battery replacement and maintenance more convenient. Built-in charger as standard, making charging more convenient and efficient.
The XC series reach truck with lithium power fully utilize the advantages of lithium battery and achieve disruptive innovations in vehicle structure, functional configuration, performance parameters, ergonomics, and operating vision. We cater for a wide range of applications whilst ensuring optimum energy efficiency. Regardless of your special requirements – whether confined spaces or lifting height reaches 7m, load capacity of up to 1,200 kg or individual customisation with various options – we have the truck you need. Compact size of the lithium battery pack and breaking through the traditional structure design, makes the truck style more novel and more efficient.
Efficient and Durable
CATL lithium battery is standard for all series, adopting 80V voltage system which can provides fast charging and long service life and less energy loss. The special-shaped lithium battery pack design provides a large operating space in the cab and a broad view.
Drive Control Limit
驱动控制限制了速度和trav旅行erse speed as soon as the forks are raised. This increases the safety when manoeuvring with a raised pallet in front of the storage rack, while still ensuring more sensitive manoeuvring during the work cycle.
Easy Maintenance
The battery pack can be replaced quickly. The driver can unlock and remove the battery while sitting on his seat.
Height Selection
Multiple heights can be pre-set on the instrument. After the function is enabled, when the fork is about to be lifted to the preset height, the lifting speed will gradually slow down and the fork will finally stops at the set height steadily.
A series light-load intermediate-position stockpickers are high-end models of storage equipment. The vehicle has a comprehensive safety protection system, excellent ergonomics and advanced control system.
For the standard configuration, multi-function instruments have multiple functions such as speed selection, wheel position display, etc. and can clearly display various information of the vehicle.
Reliability
The frame is made of high-strength steel plate and has a long service life. All wires and cables are reliably protected, greatly improving the reliability of the electrical system. Important components such as switches, connectors, instruments, etc. are imported from abroad, with excellent performance and reliable quality.
High Performance
With an AC walking motor, it has excellent acceleration performance, good climbing performance, low heat generation, no carbon brush and is maintenance-free. The advanced CURTIS AC control system provides precise, smooth and efficient control. The CANBUS structure makes the whole vehicle communication faster and more reliable.
Comfort
With double cylinders and free triplex mast, during the ascending/descending, there is no impact caused by oil cylinder switching, but good comfort and safety. The ascending/descending speeds of the cab and fork can be adjusted proportionally and controlled precisely.
Safety
The tilt switch is equipped as standard. When the vehicle is tilted to a certain angle forward or backward, to the left or right, it stops working. The cab must be lowered to a certain height to continue working. The safety pedal is equipped as standard and you need to step on the pedal to perform other operations to improve safety.
Maintenance
The AC motor has no carbon brush and is maintenance-free, which greatly saves the cost of use. The integrated power display, timing and fault self-diagnosis meter is convenient for maintenance. The rear hood can be easily disassembled for easy maintenance of hydraulic unit, electronic control, motor and other parts.
Various operating pedals, instruments, steering wheel, and switches are configured based on ergonomic requirements, and are comfortable and flexible for operation. Upon special design, the traction device can prevent the towing pin coming off during traveling.
The battery can be removed from truck side, so it is very convenient for battery maintenance.
The 3,000-3,500lbs man-up tri-lateral stacker for narrow aisles and high bay warehouses can meet the needs of customers for operations in narrow aisles and high stacking heights. Featuring a high lift, high load capacity and small turning radius, as well as advanced performance, easy operations, high safety and reliability, etc., it is an ideal solution for handling and stacking long materials indoors.
Appearance
Streamlined surface modelling, smooth profile outlines, attractive and agreeable.
Stability
Wide body structure design allows the stacker to have good stability. Frame and mast made of high-strength framework structure and low center of gravity enable good stability.
Maximum Efficiency
The narrow aisles required for operations and the fork lift height up to 470.4 inch maximize the space availability of your warehouses. The high lift mast boasts high load capacity and improved stacking efficiency.
Advancement
Electromagnetic brake is used to realize intelligent braking allows for more efficient and safer braking. With the advanced electro-hydraulic control system, the traveling speed is automatically associated with the lifting height and turning angle; The load weight is automatically associated with the lifting height; Thus the fork position is intelligently identified and the traveling speed is controlled.
Reliability and Safety
The low center of gravity at three pivots and the high strength of the main force-bearing components such as frame and mast are designed to meet heavy-duty operating conditions. The main electrical components such as the motor controller, contactor, power plug and emergency cut-off switch are all products of well-known brands.
一个全面的安全保护系统,例外ellent ergonomic design, an advanced control system and excellent performance, the vehicle is reliable, stable, comfortable and safe, and may be used for picking, transportation and other operations in narrow, low environments such as small warehouses, supermarkets, laboratories, etc.
Reliability
With a high-strength steel frame structure, the vehicle frame is robust and reliable. All wires and cables have reliable protection, which greatly improves the reliability of the electrical system. Switches, connectors, instruments and other key parts are all of leading international brands and have excellent performance and reliable quality.
High Performance
A green and environmentally friendly, efficient energy-saving CATL lithium battery is provided for the standard configuration. An integrated charger enables easy and quick charging. For the standard configuration a load tray and platform tray that can be lifted manually/electrically are provided to enable higher picking and transportation efficiency.
Comfort
The mast ascending and descending buffering function offers more comfort. An optional tray that can be lifted electrically can be operated easily, stably and comfortably. Multi-layer pedal pads and door pads reduce operator fatigue.
Safety
The right and left hand sensing and safety pedal ensure the operator is in the correct operating position. For the standard configuration a tilt switch sensor and a door guardrail sensing switch are provided to improve the operation safety. The driving speed is correlated with lifting height, the higher the lifting height, the lower the driving speed and the correspondingly smaller the acceleration.
Maintenance
The maintenance-free brushless AC motor significantly reduces the operating cost. The integrated battery display, timer and fault self-diagnosis gauge facilitate maintenance.
HANGCHA first rough terrain scissor lifts HSRPI offer competitive lift speed and large platforms to increase efficiency with the handling and capacity to get to the jobsite and finish working faster.
Equipped with 80V lithium battery system and permanent magnet synchronous motor energy consumption is 8-10% lower than AC asynchronous motor.
Wide Range of Application
Wide range of application: four-wheel drive, large pattern off-road tires, high ground clearance, maximum climbing capacity of 40%, strong passing capacity, can adapt to all working conditions.
Reliable
IP67 waterproof and dustproof permanent magnet synchronous motor, not afraid of outdoor work and high pressure water gun flushing.
Stability
The drive motor is arranged in parallel, the battery is placed at the bottom of the vehicle frame, the wheelbase and rear wheel pitch are increased, the swing point of the steering axle is raised, and the distance between the front of the fork and the front axle is reduced, to enable excellent stability.
Comfort
按照人体工程学设计,wheelbase is increased to enable enlarged leg space. The radius of the hand wheel is reduced to 300mm and the seat can be adjusted backwards and forwards, so that the operator can choose the best driving position.
Advancement
高频MOSFET集成控制器sures smooth and accurate driving and lifting control, and has excellent speed regulation performance, good performance of electronic control matching the motor, functions of regenerative braking, reverse braking and anti-sliding on ramps, etc., and high safety and reliability.
Safety
The optimized design of the wide-view mast, wide-view overhead guard and low dashboard enables a broader view of the operator and higher safety.
Maintainability
The fully opened hood quite facilitates the maintenance of the battery, oil pump motor and electric control assembly.
Stability
Small-diameter solid tires, front and rear battery sets and other technologies are used to enable excellent stability of the vehicle.
Comfort
The inclination angle of the ergonomically designed hand wheel is adjustable and the seat can be adjusted 150mm forwards and backwards, so that the operator can choose the best driving position.
Safety
The optimized design of the wide-view mast, wide-view overhead guard and low dashboard enables a broader view of the operator and higher safety.
Maintainability
The innovative two-door structure with one door, respectively, on the left and right sides of the forklift easily facilitates the maintenance of the motor, oil pump and electric control of the forklift and enables good resistance to dust and water.
Advancement
高频MOSFET集成控制器sures smooth and accurate driving and lifting control, and has excellent speed regulation performance, good performance of electronic control matching the motor, functions of regenerative braking, reverse braking and anti-sliding on ramps, etc. and high safety and reliability.
A Series IC Forklift Truck
High torque at low speeds, good performance of acceleration at medium and high speeds. Bosch’s non-road special common rail system has good oil adaptability.
High Safety
The idle start protection and an optional seat sensing system are provided to improve operating safety. The fully hydraulic power braking with a large volume accumulator is adopted to allow safe and reliable braking.
Easy Maintenance
With the LCD instruments to display the relevant information of the vehicle to facilitate troubleshooting, the running status of the vehicle can be monitored and the engine failures can be displayed.
Comfort When Operating
The ergonomic joystick with good hand feeling and feature integration make joint operations simple and comfortable. Adjustable steering device, hot & cold air conditioner and reading light provided in the cab as standard configuration, enable a more comfortable driving experience.
Efficent Use and Energy Conservation
The fully hydraulic load sensing steering and dual pump merging technology improves operating effciency, reduces system pressure loss and saves energy consumption. The vehicle is equipped with a luminous body to realize high performance, long service life and low energy consumption.
New Design
Inherit the exterior design of Hangcha’s A products and integrate innovation in classic style, thus the vehicle has a smooth vivid profile and a sturdy design. The newly designed semi-enclosed instrument console make the entire forklift look compact and stylish.
Safety and Reliability
The vehicle has an optimized layout design, reduced front overhang, lowered center of gravity and improved stability of the entire forklift. The new channel steel, ultra-wide-view mast and lowered dashboard in the cab broaden the front view of the driver significantly. Profiled steel overhead guard features high strength with good sealing of the cab.
Comfort and Convenience
Standard seat with an adjustable backrest has good packaging and anti-slip design, enabling a more comfortable driving and sitting experience. The low-angle accelerator pedal reduces the driver’s fatigue. Integrated light combination switch makes the operation more convenient.
Exterior and Performance
The upper surfaces of the large locked toolbox and counterweight on the left and right sides of the vehicle body are designed to be fully flat to enable a large storage space.
Reliability
The high-power plate-fin heat dissipater and independent hydraulic oil heat dissipater have been subjected to heat balance test verified under two kinds of operating conditions - typical operating conditions and no-load maximum-speed long-distance driving conditions, to ensure the normal operations of the system under various operating conditions.
A Simple and Efficient Hydraulic System
The fully hydraulic load sensing steering system makes steering easier and more flexible. Two pumps are used to enable merging and less pressure loss and energy consumption..
Maintenance
With the LCD instruments to display the relevant information of the vehicle which emit an alarm for an engine fault, the running status of the vehicle can be monitored and fault queries can be performed to facilitate problem analysis.
High performance
The performance is improved. The travel speed and lift speed are improved by 10%-20%. The body of the truck is reduced, and the flexibility is strengthened. Thanks to CAE (Computer Aided Engineering) technology, structural components are more balanced.
Reliability
Increased digitization, additional central controller, CAN-bus structure, built-in multiple diagnostic, management functions and fault alarm are convenient for diagnosis.
Precise Operation
Integrated fingertip system, pilot control, smart and accurate; Hydraulic brake curve optimization, smooth and easy control.
The Yuchai common rail engine has strong power and low fuel consumption
High torque at low speeds, good performance of acceleration at medium and high speeds. Bosch’s non-road special common rail system has good oil adaptability. A long oil change interval enables a low use cost.
A special gearbox of a domestically renowned brand
定制的16 t特殊的齿轮有一个大帽acity, high efficiency and good traction performance. The PTO outputs high torque and can be matched with a large-displacement gear pump. The electronic steering provided for the standard configuration makes operations easier.
Domestic heavy-duty caliper drive axle
The caliper brake provides fully hydraulic power braking and large braking force. The integrally-cast axle housing has good strength. With a main gearbox for heavy-duty trucks, mature and reliable. The input shaft cable-type central parking brake is simple and reliable and can be operated easily.
Easy Maintenance
The wide-open hood, water tank lid, left and right hood side panels, and front bottom panel can be removed easily. A cloud smart module provided for the standard configuration enables remote control and diagnosis.
Appearance
The exterior has a family appearance and a compact and smooth style showing modern industrial aesthetics. With modular and standardized design taking full advantage of the X series platform, the main parts are verified step by step in advance, so that the vehicle is highly mature.
Efficient
With the hydraulic load-sensing system to enable on-demand supply, less continuous load of the engine and less energy consumption and emissions, the work efficiency is improved significantly, and the average operation efficiency has been greatly improved.
Intelligent
The high-definition LCD bus instruments have bus architecture and several built-in diagnosis and management functions to enable central fault alarm, simplified operations, easy diagnosis and flexible configuration of electrical functions.
Comfort
The adjustable suspended seat, inclinable telescopic steering column, and multidirectional adjustable console can meet the needs of different operators to the greatest extent and bring a comfortable control experience.
Safety
An optional rear-pillar assist grip with a horn button enhances safety of operator while traveling in reverse.
All-round visibility
Optimized design provides outstanding visibility in all directions.
Comfortable
The fully-suspended gearbox, fully-suspended overhead guard, and fully-suspended seat realize three-stage vibration reduction to reduce vibration of the vehicle.
Reliable
A wet axle is developed and used to significantly improve the reliability of the braking system and force transmission structural parts. (Wet brake, custom high-strength bolts, wheel side planetary reducer).
Electrical system
The new-generation high-efficiency energy-saving novel combination LED lighting system is energy-saving, while the performance and service life of the lights are significantly improved.
Productivity
The new Dynamic load sensing hydraulic steering system contributes to reduce loss of hydraulic and improve energy efficiency.
Comfortable
The new automobile-style light/turn-signal lever and forward-reverse lever are ergonomically designed and arranged to improve comfort and productivity. The new, relocated easy-to-see LCD meter lets the operator check on all aspects of operational status at a glance.
Safety
A throttling device is adopted to avoid the mast being out of control even some pipes are broken.
Gear-box
Imported gear-box, multi-stage torque converter, big converter ratio, wide range of auto-adjust speed; stable and smooth shift, 2 stage forward and 1 stage backward, easy operation and maintenance.
Steering System
HANGCHA-made crosswise steering axle; The steering with load sensor and adjustable steering device make the operation easily.
Hydraulic System
Multi-hydraulic valve make it easy to operate. Load sensor hydraulic system, dual pumps supply, dynamic load sensor priority valve, reduce power consumption, lower the hydraulic oil temperature.
Chassis
The combined chassis structure provide the high intensity and low weight feature, increase the cooling area of the oil tank greatly.
Power System
客户可以选择康明斯涡轮6缸engine or Yuchai engine which according with the GB3 Emission Regulation, high performance, low oil consumption, low speed with high torque, great capacity cooler.
Transmission System
ZF micro controller with 3 stage power-shiftis to make sure the high reliability. Using the most advanced TCU microelectronic control transmission proportional control valve to achieve uninterrupted power output and automatic transmission, no need the driver manual shift operation. Fault display and convenient diagnostic socket, greatly simplifying maintenance and repairs. German Kessler heavy load drive axle, with two stage speed adjust, multi-disc wet service brake system, is fully enclosed system with maintenance free.
Hydraulic System
国际知名品牌的液压阀,the main hydraulic pump, the guide handle.Load sensing hydraulic system, reduce the continuous load of engine ; Remote hydraulic control and electric control are simple and convenient. Multiple hydraulic testing points simplify the maintenance work.
Brake System
Poclain hydraulic power brake, wet multi-disc service braking and spring action, caliper disc parking brake system with forced cooling by oil, is safe and reliable.
Steering System
Single transverse arranged cylinder of steering axle has dual function, full hydraulic power steering, steering has priority, with load sensing function, for easy operation.
Safety
Safety technologies such as seat sensing, dynamic anti tipping protection, longitudinal dual anti-tipping protection, spreader twist-lock dual protection, startup anti-stalling protection, fault protection, etc. are used to ensure safe operations at all times.
Maintenance
The easy-to-remove hood is designed. All the maintenance points are in easily accessible and safe positions and the electric control cabinet wiring method is adopted, which greatly simplifies the maintenance and repair and improves the maintenance efficiency.
Efficient
Electric proportional control, throttle following control, vertical lift control, intelligent cooling fan control and torque control enable efficient and flexible control.
Strong power system
With high performance and low fuel consumption, the low-speed high-torque VOLVO TAD1151VE engine has advanced fault diagnosis and fault protection functions. With a displacement of 10.8L, six in-line cylinders and low emission, it is turbocharged and meets EPA3, EUⅢA and China Stage III emission requirements.
ELME new-generation container spreader
For the new-generation ELME817 series telescopic container spreader, the design of the telescopic beam, turntable, etc. are optimized, so that the structural strength is increased, the weight of the spreader is 16% less than that of the spreader of the last generation and the service life is prolonged by 30%. The arrangement of the oil cylinder is changed.
Vehicle cooling management
Fans with electronic motors are used independently to cool hydraulic oil and brake oil, so that the requirements for use in the 50-degree high temperature environment are met. Torque converter oil temperature control management ensures that the gearbox works within the optimal temperature range.
Appearance
The pitch-down streamlined design of the vehicle presents a vivid and sturdy profile. The optimized counterweight contour greatly reduces the turning radius of the vehicle, broadens the side rear and front rear views, and makes driving simple and safe.
Appearance
Safety technologies such as seat sensing, dynamic anti tipping protection, longitudinal dual anti-tipping protection, spreader twist-lock dual protection, startup anti-stalling protection, fault protection, etc. are used to ensure safe operations at all times.
Comfort
Professional exterior industrial design, high-end product with high identification, compact and smooth style showing modern industrial aesthetics. Hidden arrangement. The exposed part allows more clean and neat appearance.
Intelligent
The central controller of the forklift uses CAN bus architecture to monitor the built-in diagnostic sensors, manage the functions of the forklift and raise central fault alarm of the forklift. /Optional intelligent management system can be selected to make remote intelligent monitoring manage devices more easily.
Maintainability
The whole vehicle is equipped with a tiltable cab, a wide-opened hood, mast centralized lubrication and fault diagnosis display function, which is very convenient for maintenance.
Fully-suspended All-round Vision Cab
新全悬挂全面的视野cab (HPC) and optimized vehicle outline enable all-round sight and view. Performance of the air conditioner is improved to enable uniform conditioned air blowing from the air outlet and a strong cooling effect.
Reliable
新全悬挂全面的视野cab (HPC) and optimized vehicle outline enable all-round sight and view. Performance of the air conditioner is improved to enable uniform conditioned air blowing from the air outlet and a strong cooling effect.
Appearance
The A Series Pallet Truck is completed with specialized industrial design of appearance. The entire truck features smooth lines and affluent sense of movement, and compact profile, with full consideration being given to ergonomics, in accord with the latest appearance design trend.
Reliability
The three-point support design is applied, and side support system and elastic auxiliary wheels are provided to guarantee safety and reliability. With optimized design, the lifting rod is steady and reliable, bearing small force.
Safety
Release braking, reverse braking, and three types of emergency braking can ensure safety of traveling; Anti-sliding function on slope can ensure safety of operation.
High Performance
It is equipped with permanent magnet brushless drive motor, with excellent performance, and a new 48V power supply system, with extremely low heat generation.
Comfort
The REMA tiller of latest development is simple but reliable and beautiful, and all operations can be done easily with one hand.
Comfort
The shock absorption design of foldable platform improves comfort greatly to the operator. Simple and beautiful tiller designed to operate all functions easily even by one hand.
High performance
The applied CANBUS structure to more reliable and faster command access. Regenerative brake and slope anti-slide function are offered by this truck.
Reliability
Water-proof plugs and connectors applied to provide a reliable protection to electric system. The adopted unique floating suspension system ensures good driving wheels’ grip and excellent stability.
Stability
Integrated mast matched to chassis width. High resistance fork carriage and load arms made of robust pressed steel.
Comfort
All commands integrated to the tiller, the function buttons can be operated in comfortable way. For safe use in confined areas, tiller operates in vertical position via crawl speed button.
Safety
The truck has the lowering intelligent protection function. When the forks are less than 150mm away from the ground, the side lowering button is ineffective. With the emergency reverse button at the head of the handle, when the truck runs back and there is emergency, it can effectively prevent the driver from injury.
Reliability
With five-supporting-point and low gravity center design, a rugged construction makes the pallet truck that can be relied on. With the non-contact proximity switch, such switch has long service life and can operate reliably.
Productivity
Compacted chassis design, makes the truck operated in limited spacious. Powerful AC traction motor with Curtis control system. Applied MOSEFET high frequency control.
Ergonomics
Tiller is ergonomically designed for Max. driver’s comfort. Dual lift/lower button controls allow operation by either hand. Creep speed control button is available. Conductor belt is standard specification.
Serviceability
Battery discharge indicator with lifting interrupt as standard specification when 20% battery capacity available and inform the operator of recharge requirement. IP54 environment sealing, which protect the inside components. Open the back cover, every components are easy to reach.
Appearance
All plug connectors are imported and waterproof, and all cables have reliable protection, which increases reliability of electrical system significantly.
Comfort
The standard configuration of tortoise speed driving function allows the truck to move at slow speed more easily.
Safety
The soft landing system reduces lowering speed automatically when height from ground to fork is less than 100mm, which provides effective protection for goods.
High Performance
The AC driving motor features excellent acceleration performance, outstanding climbing ability, low heat emission, and is brushless, and maintenance-free.
Maintenance
Back cover can be opened fully, and all components and parts are clear at a glance, which is very convenient for maintenance of the entire machine.
High Performance
Electric power steering is standard specification, which provides flexible operation.
Safety
Automatic deceleration during turning.
Maintenance
AC motor without carbon brushes, maintenance-free, cost saving.
Reliability
3-pivot and side support bar system design ensure the safe and reliability.
Reliability
The three-support-point and low-gravity-center design is adopted. The high-strength steel plate framed structure is adopted for the chassis. The tractor has long service life.
Maintenance
The brushless, maintenance-free AC motor reduces operation cost significantly.
The 3,000-3,500lbs man-up tri-lateral stacker for narrow aisles and high bay warehouses can meet the needs of customers for operations in narrow aisles and high stacking heights. Featuring a high lift, high load capacity and small turning radius, as well as advanced performance, easy operations, high safety and reliability, etc., it is an ideal solution for handling and stacking long materials indoors.
Appearance
Streamlined surface modelling, smooth profile outlines, attractive and agreeable.
Stability
Wide body structure design allows the stacker to have good stability. Frame and mast made of high-strength framework structure and low center of gravity enable good stability.
Maximum Efficiency
The narrow aisles required for operations and the fork lift height up to 470.4 inch maximize the space availability of your warehouses. The high lift mast boasts high load capacity and improved stacking efficiency.
Advancement
Electromagnetic brake is used to realize intelligent braking allows for more efficient and safer braking. With the advanced electro-hydraulic control system, the traveling speed is automatically associated with the lifting height and turning angle.
Reliability and Safety
The low center of gravity at three pivots and the high strength of the main force-bearing components such as frame and mast are designed to meet heavy-duty operating conditions.
Reliability
The full-floating hydraulic transmission gearbox, with 2WD and 4WD switch function, can provide higher running speed and stronger gradeability;
Comfortable
In developing the rough terrain forklift, comfort and easy operation is always considered, for example, improved vibrating levels, compound engine damper and full floating seat and cabin are all applied.
Maintenance
Adoption of new generation integrated electric box makes maintenance and repair convenient, layout becomes more reasonable and with better water-proof performance.
High Performance
The distance to ground is 270mm for 3.0t, it offers greater maneuverability and keep the truck moving in the roughest of applications, and yet we keep a very low center of gravity, by using a distributed weight in the forklift, giving it an excellent stability.
The multipurpose concept refers to the capability of the forklift truck to work in many different areas, with a great performance no matter how hard the conditions are. We studied all the specifications of the best forklifts in the world, specialized in industrial and rough terrain types, determining the characteristics that makes a forklift work well in an industrial environment. After that, we combined such information, to prepare the basis of the design of our product.
Introduction
Hangcha 1.5~1.8t 2WD/4WD rough terrain forklifts is a tough, compact forklift. It is world renowned for superior performance, economy and longevity.
Comfortable
In developing the rough terrain forklift, comfort and easy operation is always considered, for example, improved vibrating levels, compound engine damper and full floating seat and cabin are all applied. Comfortable also contribute to increased productivity and reduced the noise.
Maneuverability
The distance to ground is 280mm, it offers greater maneuverability and keep the truck moving in the roughest of applications, and yet we keep a very low center of gravity, by using a distributed weight in the forklift, giving it an excellent stability.
Reliability
The full-floating hydraulic transmission gearbox, with 2WD and 4WD switch function, can provide higher running speed and stronger gradeability.
Hangcha has 60 years of R&D experiences in traditional vehicle equipment and built up itÂs production capacity. Hangcha has the support of the high-end technology innovation systems consisting of the academician institutes, key enterprise institutes at provincial level specializing in intelligent vehicle for industrial use, and post-doctoral programs etc. By incorporating the cutting-edge AGV automation technologies from Kollmorgen ( NDC8 system), developing and innovating twice on this basis, Hangcha strives to become world leading provider of turn-key solutions in intelligent logistics encompassing the planning & design of logistics, systems integration, vehicle manufacturing, marketing & engineering services, to deliver internationally competitive products & solutions based on smart logistics driven technologies in the market.
Hangcha AGV's Operating at BMW Brilliance Manufacturing Facility
Hangcha Group worked with BMW Brilliance to deploy HangchaÂs first AGV system at BMW BrillianceÂs automotive manufacturing facility.
Hangcha AGV's Operating at CHAOYANG Tire's Manufacturing Facility
CHAOYANG Tire successfully integrated Hangcha Group’s AGV based intelligent logistic system into their manufacturing facility. They were able to use 11 AGV’s to replace 20 manned pieces of material handling equipment and increase their productivity.
Hangcha AGV's Operating at Ningbo Blue Dragon Logistics Warehouse
Ningbo Blue Dragon Logistics, an oceanic shipping warehouse service, uses Automated Guide Reach Trucks and Stackers to automate their warehouse and increase productivity.
Hangcha AGV's Operating at Seraphim Solar System's Facility
Seraphim Solar System partnered with Hagcha Group and Kollmorgen to make their warehouse fully automated. They used Hangcha Group’s Narrow Aisle High Reach AGV’s to increase their production to 24 hours a day. This lead to a 20% increase in their productivity.