Our cable probes can, depending on the design, be used for temperatures up to 350°C. Suitable for the measuring unit we deliver different temperature probes such as PT100, PT1000, Ni1000, TK5000, NTC 5K©, NTC 10K&, KTY 81-110, KTY 81-210
APPLICATIONS
Ideal for usage in liquid and gaseous media. Our screw in probes are used in dry and humid rooms for a temperture range from -40°C …. +400°C. For the measurement unit different temperature probes are used such as PT100, Pt1000 or thermocouples according to DIN EN 584 type J and K
APPLICATIONS
Reliable density with under- and overpressure during usage in liquids and gaseous medias can be be expected from our temperature probes with connection head. The connection head is suitable for ambient temperatures up to +100°C. The measuring range for standard applications is -50°C …. +800°C and is extendable up to +1200°C. In the measurement unit different thermocouples according to DIN EN 60 584, class 1 and DIN 43710 or Pt elements according to DIN EN 60 751 can be used.
APPLICATIONS
B+B offers a wide range of robust and steamproof penetration probes. The penetration tube is made of stainless steel and is available with centric or bevelled penetration tip. Our penetration probes are used in the control of cooking and baking processes and in all domains of the food and beverage industry. For core temperatures of -50°C … +260°C.
APPLICATION
The B+B outdoor probes are ideally suited for measuring temperature outdoors. The sensor is constructed with a IP54 impact resistant and UV resistant plastic housing. The probe can be installed easily e.g. on an outdoor wall with just one screw.
APPLICATIONS
We offer accurate reliable digital temperature measuring transducer in a miniaturised PCB design with modern ASIC technology - digitally calibrated for connecting Pt1000 sensors for measuring temperatures with a measuring range of -270…+1370 °C.
For I²C bus applications, we offer temperature measurement platinum sensors. The intelligent B+B temperature module adjusts the non-linear signal of the pt1000 sensor and translates it into an I²C or voltage output.
Our tTransducer module for standard housing PK 101 can be used for connecting platinum sensors to a SPS or to PC-cards, measuring transducers are needed, which implement the resistance change of the sensor in a standard current or voltage signal.
The thermocouple connectors are the ideal connection between components and thermocouple materials. B+B thermocouple connectors are used everywhere you measure and control temperature with thermocouples and where the portability of the measurement instruments respectively probes are the most important criteria. The different colours of our housings are analogue to the colour coding of the various national and international standards (DIN IEC 584-3, DIN EN 60584).Due to their design the thermocouple connectors are polarised and depending on the design (tpye K, J, S, T, N, R, B) usable for temperatures up to +900°C
APPLICATION
B+B offers suitable temperature measuring devices for various applications whether for the expert in Industry and Laboraturary or the daily private usage. If you measure surfaces or core temperatures – even for demanding and easy measurement application – we can offer you the most suitable temperature measuring device. Please note to state the measuring range and the required accuracy and select according to the functions your device. We also offer you with the measurement unit the suitable handheld probe for your appllication.
APPLICATIONS
B + B的数字温度测量系统Thermo-Technik are pre-calibrated, ready to use (plug&play) and designed for direct connection to PC-systems. Thanks to the open communication protocols they can also be integrated in complex measurement automation processes supported through our softwares LabView® and ProfiLab. For a more comfortable Logger Software with graphical surface, for real time visualization of the measurement rates we can offer the PCLOG which dan be delivered subject to a charge on request
APPLICATIONS
Temperature measurement with infrared is often mandatory with moveable or difficultly accessable measurement objects. B+B Thermo-Technik offers you high precise infrared temperature measurement systems for the mobile handheld devices as well as for the stationary (DM-Series) applications.
B+B has the right measurement system for many different kinds of surfaces and materials. Please do not hesitate to contact us for selecting the most suitable unit for your application.
APPLICATIONS
With the HYT-sensors you measure the relative humidity and temperature. The measuring rates are transferred with I²C-Bus. Our HYT-sensors have a measuring range of 0 … 100% RH and -40 …+125°C. This results in a lot of application possibilities in different operating areas.
APPLICATION
Capacitive humidity sensors are mechanically robust, dew resistant, alcohol resistant and suitable for many application areas.
APPLICATION
The B+B humidity-temperature module DHYT with I²C interface offers the optimal requirements for the usage in process controls and process automation. The DHYT is ideal for the usage in autoclaves and drying systems
APPLICATIONS
The B+B humidity and temperature measuring system Hytelog Multisensor is an efficient measuring and recording system which can be connected to up to 3 sensors for temperature and humidity.
APPLICATIONS
Efficient humidity and temperature measurement system. The system is delivered with a compact measuring probe in a stainless steel housing with a sinterfilter. The measuring probe is calibrated which can be checked regarding to accuracy with the reference cells, also available at B+B. Of course we also offer a re-calibration.
APPLICATIONS
The level controller is ideal for the simultaneously control of the minimum and maximum liquid level in rainwater tanks or compressor-pressure tanks.
APPLICATIONAREAS
The condensation monitor is an electronical humidity switch which detects dew formation or beginning condensate formation on objects.
APPLICATIONS
The sensor surface reacts to rain or snow. The switching polarity and sensitivity are adjustable. To guarantee the function of the rain sensor even at temperatures below freezing it is equipped with an automatic heating system. The attachable heater prevents frosting and dew formation and accelerates drying. In the most sensitive adjustment the device even recognises fog.
APPLICATIONS
B+B offers you a humidity controller which is your support to avoid mould formation and building damages in humid areas such as showers, bathrooms, swimming halls and sanitary rooms. In addition to the time controlled automatic function via the light switch the unit offers a humidity control operation and switches on the fan at critical air humidity values and in that way it ensures a dry room climate.
APPLICATIONS
Precise pressure measurement in liquids and gaseous media are possible thanks to the high-quality ceramic and stainless steel pressure sensors from B+B Thermo-Technik GmbH! Contrary to relative pressure sensors the back side of the ceramic pressure sensors exhausted and sealed. It is measured against vacuum. Due to the ceramic as material the senosr has an excellent resistance against aggrassive and corrosive mediums. Our stainles stell pressure sensors are measuring cells with thick films on stainless steel. An essential advantage is the high burst pressure.
APPLICATIONS
With our evaluation electronic you can connect the ceramic as well as the stainless steel pressure sensors. Our universal evaluation electronic is made for an easy entry to the technology. Experienced users may also directly access to the register of the ASIC which is available as accessory “ZMD Labkit”. With access to the register they can adjust digitally.
APPLICATIONS
Radar motion detector modules can capture – in contrary to infrared motion detectors- „cold“ moving objects as well as objects with a temperature difference to the ambient temperature. Even under most difficult conditions smallest movements are detected precise.
APPLICATIONS
The motion detector module is suitable for numerous applications in which motion or attendance is registrated and thus switch operations hae to be triggered. The sensor reacts to the heat radiation of moving objects. The module has a timer as well as a high-performance relay output and hence is ideally suited for e.g. automatically controling lights. Due to the digital evaluation filter which is integrated in the ASIC the module is also ideally suited for alarm applications, where a high triggering safety has to be achieved.
APPLICATIONS
The motion detector module is suitable for many applications where motion or presence is registered and so switching operations are caused. The sensor reacts to the heat radiation of moving objects
The compact SMD module has some characteristic features which guarantee universal applicability despite its small size.Very high sensitivity, adjustable in 4 steps. Integrated window comparator, TTL- and CMOS-compatible open collector output with pullup, which can also control LEDs and relays directly. Additional analogue output for your own evaluation circuit.
APPLICATIONS
Radar motion detector modules can capture – in contrary to infrared motion detectors- „cold“ moving objects as well as objects with a temperature difference to the ambient temperature. In contrary to passive infrared motion detectors, which only register objects with a temperature difference to the background, radar motion detector modules react to all kinds of movements towards the sensor. The motion sensitivity is very high, even the smallest movements are detected.
APPLICATIONS
The measurement of the illumination happens with a precise and long-term stable photodiode with industrial performance characteristics. The processing of the measuring signal takes place with the most modern sensor technology with an ASIC. The high sensitivity over a large area of illumination values and its wiring makes the brightness sensor applicable even under very bright lighting conditions. A high accuracy for typical control tasks over a large brightness area is the result of the 3-point calibration. Further advantages of the brightness sensor are the adjustment options between AC and DC supply voltage as well as the output of the measuring value as a 0-10 V standard signal.
APPLICATIONS
Universal light probe for general applications. The moulded probe is robust and resistant against environmental influences. With the universal sensor switching module SENSW-MOD12V, SENSW-MOD24V, SENSW-GEH230V the light probe becomes a twilight switch for universal application areas.
APPLICATIONS
B + B提供了最佳的和创新的产品量ure the air quality. Our products are suitable for the following applications:
In our online shop you can find a wide range of products for the measurement of air quality, available on stock, and also a wide range of accessories and measurement units!
通过高度sensiti光散射方法ve optical sensor detects particles of smoke, dust, cigarette smoke, pollen as well as house dust pores and mite dust in ambient air starting at a particle dimension of 1 µm. Areas of application: Air purifiers, Air-analysis and control systems, airconditioners, vents & fans, smoke exhaust, smoking lauchnes, innovations for allergy sufferers. Special saving potential laysin the exact regulation of control units.
APPLICATIONS
The kiro air measures the CO2 concentration of room air, temperature and humidity and shows the current values on a paper-white display. The air quality is displayed using a CO2 traffic light and also warns with a signal ton. The compact CO2 measuring device was developed to monitor the quality of the room air in the simplest possible way and to be able to quickly initiate necessary measures.
APPLICATIONS