Frame Grabber, Camera Link, Dual HD-SDI, by Active Silicon

ENVIRONMENTAL TECHNOLOGY21XX

Hall Map / Categories
Hall 06
Previous ...GHM MesstechnikI1: Active SiliconHÜBNER...Next
Previous Next

Navigation :EXPO21XX>ENVIRONMENTAL TECHNOLOGY 21XX>H06: Measurement and Sensors> Active Silicon

Active Silicon

提供配置文件
活性硅,成立于1988年,设计和manufactures imaging products for the acquisition and processing of image data in a PC or embedded environment. Product areas include camera-end modules, frame grabbers and embedded vision systems, with application areas in manufacturing, life sciences, medical imaging, security and defense. All the products and technologies are developed in-house and owned by the company. For further details, visitwww.activesilicon.com

Product Portfolio

Frame Grabbers
Active Silicon designs and manufactures a wide range of acquisition solutions based around leading-edge hardware technology and versatile software toolkits. Our frame grabber range includes acquisition solutions for CoaXPress, Camera Link and LVDS in different form factors. Operating system support includes 64-bit versions of Windows, Linux, and QNX.
- 更多信息

FireBird Series

- FireBird CoaXPress Frame Grabber (1xCXP6-2PE4L)
- - 更多信息
- - CoaXPress gives high-speed data, power and camera control all over a single cable.
  - Competitively priced to offer a real-time alternative to GigE Vision (NBASE-T) and USB3 Vision.
  - High performance with over 6 Gigabits/s acquisition rate.
  - ActiveDMA engine – acquisition with zero CPU usage.
  - Fast PCI Express 4-lane Gen2 interface.
  - Comprehensive I/O, including front panel I/O.
  - Supports PoCXP (Power over CoaXPress).
  - Micro-BNC connector.
  - Half-length low-profile PCI form-factor.
  - Supported by the proven ActiveSDK.
  - Low profile or full height bracket options available.
  - Full GenICam support (including GenTL Producer).
- FireBird CoaXPress Frame Grabber (Quad CXP-6)
- - 更多信息
- - Quad input CoaXPress Frame Grabber.
  - Four CoaXPress links, each at 6.25 Gbps.
  - RISC based ActiveDMA engine gives zero CPU acquisition.
  - 8-lane Gen2 PCI Express interface.
  - Half-length PC format.
  - Windows and Linux support (32 bit & 64 bit support).
  - Certified compliant through the JIIA CoaXPress Product Certification Program.
  - Full GenICam support via GenTL Producer.
- FireBird CoaXPress Frame Grabber (Dual CXP-6)
- - 更多信息
- - Dual input CoaXPress Frame Grabber.
  - Two CoaXPress links, each at 6.25 Gbps.
  - RISC based ActiveDMA engine gives zero CPU acquisition.
  - 8-lane Gen2 PCI Express interface.
  - Half-length PC format.
  - Windows and Linux support (32 bit & 64 bit).
  - Certified compliant through the JIIA CoaXPress Product Certification Program.
  - Full GenICam support via GenTL Producer.
- FireBird Camera Link Frame Grabber (2xCLD-2PE8)
- - 更多信息
- - Supports the latest v2.0 Camera Link interface.
  - RISC based ActiveDMA engine gives zero CPU acquisition.
  - High speed PCI Express 8-lane Gen2 interface.
  - Comprehensive I/O.
  - Supports PoCL (Power over Camera Link).
  - Standard half-length PCI form factor.
  - Supported by the proven PHX software SDK.
  - Supports GenICam for CLProtocol and GenCP cameras.
  - Includes GenICam GenTL Producer.
- FireBird Camera Link Frame Grabber (1xCLD-2PE4)
- - 更多信息
- - Supports the latest v2.0 Camera Link interface.
  - Comprehensive I/O.
  - Camera Link Mini connectors (HDR/SDR).
  - Supports PoCL (Power over Camera Link).
  - ActiveDMA technology guaranties zero CPU usage acquisition.
  - Standard half-length PCI form factor.
  - Supported by the proven PHX software SDK.
  - Supports GenICam for CLProtocol & GenCP cameras.
  - Includes GenICam GenTL Producer.
- FireBird Camera Link Frame Grabber (1xCLD-2PE4L)
- - 更多信息
- - Supports the latest v2.0 Camera Link interface.
  - Half length PCI Express form-factor.
  - Low profile or full height bracket options available.
  - Camera Link mini connectors (HDR/SDR).
  - Supports PoCL (Power over Camera Link).
  - Comprehensive I/O.
  - RISC based ActiveDMA gives zero CPU usage acquisition.
  - Supported by the proven PHX SDK.
  - Supports GenICam for CLProtocol & GenCP cameras.
  - Includes GenICam GenTL Producer.
- FireBird Camera Link Frame Grabber (2xCLM-2PE8)
- - 更多信息
- - Supports the latest v2.0 Camera Link interface.
  - RISC based ActiveDMA engine gives zero CPU acquisition.
  - High speed PCI Express 8-lane Gen2 interface.
  - Comprehensive I/O.
  - Supports PoCL (Power over Camera Link).
  - Standard half-length PCI form factor.
  - Supported by the proven PHX software SDK.
  - Supports GenICam for CLProtocol and GenCP cameras.
  - Includes GenICam GenTL Producer.
- FireBird Camera Link 3U cPCI Serial Frame Grabber
- - 更多信息
- - Supports the latest v2.0 Camera Link interface.
  - Comprehensive I/O supporting standard FireBird I/O adapters.
  - Watchdog feature.
  - Standard Camera Link connectors (MDR).
  - Supports PoCL (Power over Camera Link).
  - RISC based ActiveDMA gives zero CPU usage acquisition.
  - 3U CompactPCI Serial form-factor.
  - Extended temperature operation.
  - Supported by the PHX Software Development Kit (SDK).
  - Supports GenICam for CLProtocol & GenCP cameras.
  - Includes GenICam GenTL Producer.
- FireBird Quad USB 3.0 Host Controller
- - 更多信息
- - 4 x USB 3.0 compliant downstream ports.
  - Dual full USB 3.0 bandwidth architecture with each channel split into 2 x USB 3.0 ports.
  - Based on proven Renesas™ USB 3.0 Host Controller.
  - 符合USB 3.0规范Rev.1.0和我ntel xHCI specification Rev. 1.0.
  - Support for USB3 Vision cameras.
  - Dedicated USB power supply allows for long cables.
  - Rugged PCIe/104 form-factor.
  - Universal operation: Type 1 or Type 2 hosts.
  - Supports stack up or stack down configurations.
  - Windows and Linux support.

Phoenix Series

- Phoenix LVDS Frame Grabber (PE4)
- - 更多信息
- - 36 bit EIA-644 (LVDS) data, 4 bits for control.
  - 4 lane v1.1 PCI Express interface.
  - PCIe burst rates in excess of 750Mbytes/sec.
  - Supports digital areascan / linescan cameras.
  - Multi-tap & multi-channel camera formats, incl. line and pixel interleaved.
  - Maximum pixel clock of 75MHz.
  - PHX SDK supports various operating systems.
  - Bus mastering hardware control requires 0% CPU.
  - Dual channel serial port with both EIA-232 & EIA-644 signalling.
  - Opto-Isolated, TTL and EIA-644 I/O.
  - Utilises software configurable FPGA technology.
  - Common API allows seamless migration for existing Phoenix PCI users.
  - RoHS compliant.
- Phoenix PCI/104e Camera Link Frame Grabber
- - 更多信息
- - Single Base, Dual Base or Medium CL Configurations.
  - PCI/104-Express form factor.
  - Universal board to operate in Type 1 or Type 2 host.
  - Single lane (x1) v1.1 PCI Express interface.
  - PCI Express burst rates in excess of 190Mbytes/sec.
  - Power over Camera Link with SafePower.
  - Supports digital areascan / linescan cameras.
  - Multi-tap & multi-channel camera formats, incl. line and pixel interleaved.
  - Maximum pixel clock of 66MHz.
  - Extended temperature operation.
  - PHX SDK supports various operating systems.
  - v2.0 Camera Link compliant.
  - Bus mastering hardware control without CPU intervention.
  - Dual channel serial port with EIA-644 signalling.
  - Supports Camera Link serial comms API.
  - Data Valid (DVAL) for slow data rate cameras.
  - Opto-Isolated, TTL and EIA-644 I/O.
  - Software configurable FPGA technology.
  - RoHS compliant.
- Phoenix PMC Camera Link Frame Grabber
- - 更多信息
- - Base Camera Link Configuration.
  - PMC form factor (IEEE P1386.1 standard).
  - 32 bit 33MHz PCI support in 3.3V & 5V signalling environments.
  - Maximum PCI burst rate of 133Mbytes/sec.
  - Supports digital areascan / linescan cameras.
  - multi-tap & multi-channel camera formats, incl. line and pixel interleaved.
  - Maximum pixel clock of 40MHz.
  - Extended temperature operation.
  - PHX SDK supports various operating systems
  - v2.2 PCI and v1.1 Camera Link compliant.
  - Bus mastering hardware control with zero CPU.
  - Serial port with EIA-644 signalling.
  - Supports Camera Link serial comms API.
  - Implements Data Valid (DVAL).
  - Opto-Isolated, TTL and RS-422 I/O.
  - Software configurable FPGA technology.
- Phoenix 3U cPCI Camera Link Frame Grabber
- - 更多信息
- - Single Base, Dual Base or Medium Camera Link Configurations.
  - 3U CompactPCI form factor.
  - Optional conduction cooled assembly.
  - 32位66 mhz PCI 3.3 v团体的支持nalling environments.
  - Maximum PCI burst rate of 266Mbytes/sec.
  - Supports digital areascan / linescan cameras.
  - Multi-tap & multi-channel camera formats, incl. line and pixel interleaved.
  - -40°C to +85°C extended temperature operation.
  - PHX SDK supports various operating systems.
  - v2.2 PCI and v1.2 Camera Link compliant.
  - Support for PoCL including SafePower.
  - Bus mastering hardware control with 0% CPU intervention.
  - Supports Camera Link serial comms API.
  - DVAL for slow data rate cameras.
  - Opto-Isolated, TTL and EIA-644 I/O.
  - Software configurable FPGA technology.
  - Optional rear panel I/O adapter available.
  - RoHS compliant.
- Phoenix Camera Link Frame Grabber (D48-PE4H)
- - 更多信息
- - Single Base, Dual Base or Medium Camera Link Configurations.
  - 四车道(x4) v1.1 PCI Express interface.
  - PCI Express burst rates in excess of 750Mbytes/sec.
  - Supports Power over Camera Link with SafePower.
  - Supports digital areascan / linescan cameras.
  - Accepts multi-tap & multi-channel camera formats, including line and pixel interleaved.
  - Maximum pixel clock of 85MHz.
  - Software Development Kit (SDK) supports various operating systems for rapid integration.
  - v1.2 Camera Link compliant.
  - Bus mastering hardware control of scatter-gather requires 0% host CPU intervention.
  - Dual channel serial port with EIA-644 signalling.
  - Supports Camera Link serial comms API.
  - Implements Data Valid (DVAL) for slow data rate cameras.
  - Opto-Isolated, TTL and EIA-644 I/O.
  - RoHS compliant.
- Phoenix Camera Link Frame Grabber (D24-PE1)
- - 更多信息
- - Base Camera Link Configuration.
  - Single lane (x1) v1.1 PCI Express interface.
  - PCI Express burst rates in excess of 190Mbytes/sec.
  - Supports Power over Camera Link with SafePower.
  - Multi-tap & multi-channel camera formats, incl. line and pixel interleaved.
  - Maximum pixel clock of 85MHz.
  - PHX SDK supports various operating systems.
  - v1.2 Camera Link compliant.
  - Hardware control of scatter-gather requiring 0% CPU.
  - Serial port with EIA-644 signalling, also accessible as a standard Windows COM port.
  - Supports Camera Link serial comms API.
  - Implements Data Valid (DVAL) for slow data rate cameras.
  - Opto-Isolated, TTL and EIA-644 I/O.
  - Utilises software configurable FPGA technology.
  - Common API allows seamless migration for existing Phoenix PCI users.
  - RoHS compliant.

Camera Interface Boards
Active Silicon offers a range of interface boards for AutoFocus-Zoom cameras from Tamron, Sony and others. The interface boards take data from the proprietary camera interface and format into industry standard interfaces such as 3G-SDI/HD-SDI, USB 3.0, HDMI and IP. All modules feature very low clock jitter and stable outputs over a wide temperature range and are suited to many applications in broadcast, medical, industrial, security and defense applications.
- 更多信息

- Harrier 3G-SDI Camera Interface Board (75 Ohm)
- - 更多信息
- - 3G-SDI and HD-SDI interface solution for the Tamron MP1010M-VC and MP1110M-VC cameras.
  - Simultaneous analog video output (PAL/NTSC) in 720p50/60 modes.
  - HD-VLCTM mode for long cable length applications.
  - Ultra-small micro-coax connector (75-Ohm connector).
  - For the MP1110M-VC camera all HD modes are supported, and for the MP1010M-VC all HD modes up to 1080i60/1080p30 are supported.
  - Compliant with SMPTE 274M and SMPTE 296M.
  - Video mode selection switches and built-in test pattern.
  - 3V CMOS/TTL (5V TTL compliant) serial UART comms port for camera control.
  - Interface board may be mounted on the side of the camera, replacing bracket (as shown in product photo).
- HD-SDI digital interface kit for Sony FCB-EV7520A
- - 更多信息
- - HD-SDI interface solution for the Sony FCB-EV7520A camera.
  - Also compatible with other Sony FCB cameras of the EV-series.
  - Includes interface module, cables and mounting kit.
  - Uses the camera’s digital output to give optimum image quality.
  - Supports the following HD modes – 1080p at 25, 29.97 and 30Hz, 1080i at 50, 59.94 and 60Hz, 720p at 25, 29.97, 30, 50, 59.94 and 60Hz.
  - Compliant with SMPTE 274M and SMPTE 296M.
  - Video mode selection switches and built-in test pattern.
  - RS-232 communications port for camera control.
  - RoHS compliant.
- HD-SDI digital interface kit for Sony FCB-EV Series
- - 更多信息
- - HD-SDI interface solution for the Sony FCB-EV series of cameras.
  - Includes interface module, cables and mounting kit.
  - Uses the camera’s digital output to give optimum image quality.
  - Supports the following HD modes – 1080p at 25, 29.97 and 30Hz, 1080i at 50, 59.94 and 60Hz, 720p at 25, 29.97, 30, 50, 59.94 and 60Hz.
  - Compliant with SMPTE 274M and SMPTE 296M.
  - Video mode selection switches and built-in test pattern.
  - RS-232 communications port for camera control.
  - RoHS compliant.
- HD-SDI digital interface kit for Sony FCB-EH Series
- - 更多信息
- - HD-SDI Interfacing solution for the Sony FCB-EH series of cameras.
  - Includes interface board, cables and mounting kit.
  - Uses the camera’s digital output to give optimum image quality.
  - Supports all available HD modes – 1080p, 1080i (PsF), 720p at 25, 29.97, 30, 50, 59.94 and 60Hz.
  - Compliant with SMPTE 274M and SMPTE 296M.
  - Video mode selection switches and built-in test pattern.
  - RS-232 communications port for camera control.
  - Compatible with Active Silicon’s frame grabbers.
  - RoHS compliant.
- HD-SDI digital interface kit for Sony FCB-EH3150
- - 更多信息
- - HD-SDI Interfacing solution for the Sony FCB-EH3150 camera.
  - Includes interface board, cables and mounting kit.
  - Uses the camera’s digital output to give optimum image quality.
  - Supports all available HD modes – 1080p, 1080i (PsF), 720p at 25, 29.97, 30, 50, 59.94 and 60Hz.
  - Compliant with SMPTE 274M and SMPTE 296M.
  - Video mode selection switches and built-in test pattern.
  - RS-232 communications port for camera control.
  - Compatible with Active Silicon’s frame grabbers.
  - RoHS compliant.
- CoaXPress digital interface kit for Sony FCB-H11
- - 更多信息
- - Single coax solution for interfacing to Sony FCB-H11 or FCB-H10 block cameras.
  - Includes interface board, cables, and bracket.
  - Uses the digital output on the Sony FCB-H11 to give optimum image quality.
  - Supports all HD modes of the FCB-H11 – 1080i and 720p at 50Hz or 60Hz – in real time.
  - Single 2.5Gbps CoaXPress link.
  - Compatible with FireBird CoaXPress frame grabbers with support for various operating systems.
  - Compliant with CoaXPress-TD protocol.
  - RoHS compliant.

Embedded Systems
Active Silicon designs and manufactures custom embedded systems, often integrating our leading-edge image acquisition technology. Typically, units are designed for a specific OEM application often in the field of medical devices, industrial automation or remote monitoring. Systems are designed to meet various safety, quality and medical standards as appropriate, as well as being designed for long product life – retaining the same fit, form and function for many years.
- 更多信息

- USB3 Vision Processing Unit
- - 更多信息
- - Custom COM Express based embedded PC in custom housing.
  - Intel i7 processor – other options available.
  - 4 channels of USB 3.0 inputs designed for “USB3 Vision”.
  - 4 channels of 3G-SDI outputs.
  - 1 x RS-232 port.
  - Two internal SSD drives (M.2 SATA).
  - Standard interfaces for development: 4 x USB 3.0, 1 x GigE, 1 x DisplayPort.
  - PCIe/104 expansion slot.
- COM Express Embedded System – LM01
- - 更多信息
- - COM Express based embedded PC.
  - Intel i7 processor – other options available.
  - Option 4 channels of HD-SDI / 3G-SDI outputs.
  - 1 x RS-232 port.
  - Two SSD drives (M.2 SATA).
  - Standard PC interfaces: 4 x USB 3.0, 1 x GigE, 1 x DisplayPort.
  - PCIe/104 expansion slot.
- COM Express Embedded System – CM07
- - 更多信息
- - Custom COM Express based embedded PC.
  - Intel i7 processor – other options available.
  - 4 x USB3.
  - 3 x GigE Network (1 supporting POE).
  - 2 x SATA.
  - 2 x CAN Bus.
  - 2 x RS232.
  - 2 x TTL UARTs.
  - 1 x DisplayPort
  - 1 x VGA
  - PS/2 Keyboard and Mouse
  - PCI/104-Express expansion slot.
- Custom Embedded System – TC12
- - 更多信息
- - Custom ARM based embedded PC.
  - Dual DC motor controllers.
  - 4 x RS-485 ports.
  - 1 x GigE Network port.
  - 1 x RS-232.
  - 1 x custom I/O bus.
  - Linux operating system.
- Integrated Camera and Lighting Unit – VC2
- - 更多信息
- - Custom controller based on Microchip PIC.
  - Built-in LED lighting with controller.
  - Integrated camera and lens.
  - 1 x RS-232.
  - 1 x custom bus with real-time signals.
  - LEDs for operational and service feedback.
- ETX Embedded System – TC06
- - 更多信息
- - ETX processor module (low power Intel Celeron).
  - Internal CompactFlash drive.
  - 1 x VGA output.
  - 2 x USB2.
  - 1 x GigE network port.
  - 1 x RS-232.
  - 1 x RS-485 Motor Controller.
  - Quadrature phase encoder input.
  - 10 x Solenoid drive outputs.
  - Analog image capture with strobe/lighting control.
  - Keyswitch Service Override.
  - 120/240 VAC operation.
  - EN60950 / UL950 certified.
- Optical Reader – ARH
- - 更多信息
- - Standalone sensing device.
  - Uses 2 x Microchip processors.
  - 4 x custom sensors with custom lenses.
  - 1 x RS-485 output.
  - Machined from solid alloy with gold plated lid.
  - 3 x LEDs for operational and service feedback.
- Multi-channel Surveillance System
- - 更多信息
- - Custom COM Express based embedded PC.
  - 1 x DVI-I graphics output.
  - 2 x GigE network ports.
  - 2 x SATA ports.
  - 4 x USB2.
  - 8 x standard resolution analog video inputs.
  - 2 x RS-232.
  - 2 x RS-422.
  - 1 x RS-485.
  - 1 x CompactFlash slot.
  - 3G modem.
  - Housed unit for outdoor use.
- COM Express Embedded System – CM04
- - 更多信息
- - Custom COM Express based embedded PC.
  - 1 x DVI-I graphics output.
  - 2 x GigE network ports.
  - 2 x SATA ports.
  - 4 x USB2.
  - 8 x standard resolution analog video inputs.
  - 2 x RS-232.
  - 2 x RS-422.
  - 1 x RS-485.
  - 1 x CompactFlash slot.
- COM Express Embedded System – CM03
- - 更多信息
- - Custom COM Express based embedded PC.
  - 1 x DVI-I graphics output.
  - 1 x DisplayPort output.
  - 2 x GigE network ports.
  - 2 x USB3 ports.
  - 4 x USB2.
  - 2 x SATA ports.
  - 4 x General Purpose I/O lines.
- Custom Video Streaming Server
- - 更多信息
- - Custom embedded video streaming server.
  - 4 x RS-170/CCIR standard resolution video inputs.
  - 4 x GigE Ports.
  - Integrated WiFi.
  - 9-16V power supply.
  - FAA certification for use in commercial passenger aircraft.
- ETX Mini-Embedded System
- - 更多信息
- - Custom ETX format embedded system.
  - Range of low to medium power processor options.
  - 2 x video inputs (RS-170/CCIR).
  - 2 x RS-422 ports.
  - 3 x RS-485 ports.
  - 3 x Hall effect sensor inputs.
  - 12 x programmable I/O.
  - LCD panel driver.
  - 1 x SATA ports.
  - 1 x VGA, keyboard, mouse for development.
- PC/104-Plus Embedded Video Server
- - 更多信息
- - Custom embedded video streaming server.
  - 4 x RS-170/CCIR standard resolution video inputs.
  - 1 x GigE Port.
  - Integrated WiFi.
  - 9-16V power supply.
  - FAA certification for use in commercial passenger aircraft.

Software
Active Silicon offers a range of software to support its vision hardware products across several operating systems. There are also drivers for 3rd party machine vision and scientific imaging packages as well as Twain and NetMeeting support. Independent of the hardware we have a variety of other image processing tools such as JPEG and wavelet compression and patented vision algorithms.
- 更多信息

- ActiveCapture
- - 更多信息
- ActiveCaptureis the front-end software for Active Silicon FireBird frame grabbers. It allows the user to access and control cameras and frame grabbers in a clear and intuitive way. It provides a simple and easy way to configure the hardware system, allowing control of various image acquisition features such as triggering, image resolution, etc.
  - Optimized image acquisition and display.
  - GenICam application for CoaXPress and Camera Link cameras.
  - Also for use with non-GenICam Camera Link cameras.
  - GenICam feature browser and GenTL acquisition control.
  - Comprehensive image display features such as zoom and color sampler.
  - Image sequence capture and playback.
  - High bit-depth color and greyscale histogram functions.
  - Command line utility for direct register access to the camera for low-level debugging.
  - Supports TIFF & JPEG image file formats.
- ActiveSDK Software Development Kit
- - 更多信息
- Imaging SDK for FireBird frame grabbers
  - Supports Camera Link and CoaXPress camera interfaces.
  - Comprehensive library functions and documentation.
  - Supported environments include 64-bit Windows and Linux as well as macOS and QNX.
  - Common API across all supported operating systems.
  - Comprehensive suite of C, C++ and C# example applications with full source code.
  - GenICam and NVIDIA GPUDirect for Video examples provided.
  - Libraries are supplied as Windows dynamic link libraries (.dll), Linux shared object (.so) libraries and macOS Frameworks.
- 释放软件开发工具包
- - 更多信息
- Imaging SDK for Analog Frame Grabber
  - SDK support for Active Silicon’s LFG frame grabbers.
  - Designed for OEM integration.
  - Supports various operating systems.
  - Licence for TMG Imaging Library included.
- GenICam Support
- - 更多信息
- - GenTL Producer for FireBird CoaXPress and Camera Link frame grabbers.
  - Compatible with CLProtocol and GenCP cameras.
  - Develop hardware independent applications.
  - Easily migrate from GigE Vision or USB3 Vision applications to high speed Camera Link and CoaXPress solutions.
  - Confidence Test application provided to check that the system is GenICam ready.
  - Fully featured GenICam Consumer application (“ASDemo”) provided.
- GPUDirect for Video
- - 更多信息
- - Supported GPUs: Quadro; GRID; Tesla; click here for full list.
  - Operating system – Windows 7/8/10 64 bit or Linux 64-bit.
  - Supporting API – CUDA, OpenCL™, OpenGL®, DirectX®.
  - NVIDIA cards offer from 8 to over 5000 CUDA Cores, offering a range of processing power.
- DirectGMA
- - 更多信息
- - Supported GPUs: FirePro W™ W5x00 and above; FirePro™S series.
  - Operating system – Windows 7/8/10 64‑bit or Linux 64-bit.
  - Supporting API – OpenCL™, OpenGL®, DirectX®.
  - AMD graphic cards support STREAM technology, which uses OpenCL cross-platform programming standard.
- LabVIEW Driver
- - 更多信息
- - Compatible with all FireBird interface cards.
  - Access to frame grabber functionality from within LabVIEW.
  - Easy snap/grab of images.
  - Provides interface to frame grabber SDK.
- Frame Grabber Drivers for Cognex VisionPro®
- - 更多信息
- - All FireBird Camera Link and CoaXPress frame grabbers supported.
  - Selected Phoenix Camera Link, HD-SDI and LVDS frame grabbers supported.
- Third Party Applications
- - 更多信息
- - Adaptive Vision Studio and Library (Adaptive Vision)
  - Common Vision Blox (Stemmer Imaging)
  - EyeMotion (See Fast Technologies)
  - HALCON (MVTec)
  - M3 (Metlogix)
  - nVISION (di-soric Imaging)
  - Streampix (Norpix)

ENVIRONMENTAL TECHNOLOGY21XX

Frame Grabbers

FireBird Series

FireBird CoaXPress Frame Grabber (1xCXP6-2PE4L)

FireBird CoaXPress Frame Grabber (Quad CXP-6)

FireBird CoaXPress Frame Grabber (Dual CXP-6)

FireBird Camera Link Frame Grabber (2xCLD-2PE8)

FireBird Camera Link Frame Grabber (1xCLD-2PE4)

FireBird Camera Link Frame Grabber (1xCLD-2PE4L)

FireBird Camera Link Frame Grabber (2xCLM-2PE8)

FireBird Camera Link 3U cPCI Serial Frame Grabber

FireBird Quad USB 3.0 Host Controller

Phoenix Series

Phoenix LVDS Frame Grabber (PE4)

Phoenix PCI/104e Camera Link Frame Grabber

Phoenix PMC Camera Link Frame Grabber

Phoenix 3U cPCI Camera Link Frame Grabber

Phoenix Camera Link Frame Grabber (D48-PE4H)

Phoenix Camera Link Frame Grabber (D24-PE1)

Camera Interface Boards

Harrier 3G-SDI Camera Interface Board (75 Ohm)

HD-SDI digital interface kit for Sony FCB-EV7520A

HD-SDI digital interface kit for Sony FCB-EV Series

HD-SDI digital interface kit for Sony FCB-EH Series

HD-SDI digital interface kit for Sony FCB-EH3150

CoaXPress digital interface kit for Sony FCB-H11

Embedded Systems

USB3 Vision Processing Unit

COM Express Embedded System – LM01

COM Express Embedded System – CM07

Custom Embedded System – TC12

Integrated Camera and Lighting Unit – VC2

ETX Embedded System – TC06

Optical Reader – ARH

Multi-channel Surveillance System

COM Express Embedded System – CM04

COM Express Embedded System – CM03

Custom Video Streaming Server

ETX Mini-Embedded System

PC/104-Plus Embedded Video Server

Software

ActiveCapture

ActiveSDK Software Development Kit

释放软件开发工具包

GenICam Support

GPUDirect for Video

DirectGMA

LabVIEW Driver

Frame Grabber Drivers for Cognex VisionPro®

Third Party Applications