Videos
Loading the player ...
  • Offer Profile
  • Kemper - the Header Specialists

    We inspire with special customer proximity, unmatched product quality, continous innovation and excellent business processes.

    • Honestly,
    • 可靠,
    • agile,
    • customer focused.

    “Success through continuity” is the motto at KEMPER, the No. 1 in row-independent harvesting headers.
    For us, “Made in Germany” is more than just a label.

Product Portfolio
  • Kemper harvesting headers

  • The headers operate in an open cut mode. Fast and uncompromising. The row independent cutting technology makes it possible to operate in the field from any direction - important when harvesting laid crops.
      • Kemper 300plus series

      • Professional - from every angle

        The Kemper harvesting headers with the ‘small’ drums have impressively low weight and a short, compact construction. Working width vary from 3 to 9 m.

        The headers of the 300plus series cut quickly and thoroughly at a high speed of rotation. Up to 12 cutting rotors permit use with a very wide range of crops – regardless of the row spacing. Thanks to this row-independent harvesting technology, the field can be worked from any side, which is particularly important for down crop. The even feeding of the harvested crop lengthwise to the chopper unit, and the tidy bundling in the special step feeder drums, permit full utilisation of your harvester. The 300plus series offers highest productivity with maximum chopping quality whatever the width of the chopping drum.

        应用程序:
        Wide range of applications: Maize, sorghum, sunflowers, whole crop silage, oilseed rape, hemp, pampas grass, etc

        Transport of the machine:
        The outer cutting rotors of the 360plus are hydraulically foldable to a transport width of 3m. The 375plusand the 390plus
        are foldable to a width of 3.3 m.

        Cutting System:
        Row independent cutting system with high speed cutting rotors and freewheel mechanism. Cuts across the entire cutting width by means of enclosed saw type rotor blades with replaceable segments.

        Technical specifications:
        Reduced axle loads, because of less counter weights. Reduced ground pressure. Good manoeuvrability thanks to short, compact construction.

        Special equipment:
        Possible options for the 300plus series, electro hydraulic lateral tilt frame, Kemper row guidance, etc.

          • Harvesting header 345plus

          • 4.5 m working width
          • Harvesting header 375plus

          • 7.5 m working width
          • Comfort Support Wheel

          • 安全可靠的- must be Kemper

            The outer cutting rotors of the 345plus, 360plus and 375plus are hydraulically foldable to a transport width of 3 m. The 390plus is foldable to a transport width of 3.3 m. The transport guard of the 345plusand 360plus is fitted with flashing lights and position lights. From the 375plus on the lighting is intregrated in the fold-in wings.

            The low width during transport and the clever folding of the header allow for a perfect view.

        • 400plus / 400 series

        • Powerful - even under extreme conditions.

            • Harvesting header 445

            • 4.55 m working width

              Simply solid

              The proven header for harvesting thin-stemmed crops. The simple, practical design of the rotary intake system, consisting of four intake and two transport drums, ensure that service and maintenance work is kept to a minimum.

              Applications
              Wide range of applications: Maize, sorghum, sunflowers, whole crop silage, oilseed rape, hemp, pampas grass, etc.

              Road transport
              The outer cutting rotors are folded hydraulically to give a transport width of 2.47 m. The transport guard is fitted with flashing lights and position lights.

              Cutting sytem
              Row independent cutting system with high speed cutting rotors and freewheel mechanism.

              Technical specifications
              Here you will find information about, working width, transport width etc.

              Options
              The 445 has several options including attachable crop lifters, a whole crop silage kit etc.

            • Harvesting header 460plus

            • 6.0 m working width

              460plus – up and away

              The 460plus harvesting header with four big gatherer drums and two intake drums is a sturdily built, no-nonsense machine. With its working width of 6.0 metres it fits perfectly into the KEMPER product range. When harvesting maize over 4.0 metres, the 460plus shows its real ability. The big gatherer drums ensure almost loss free feeding. Plants take a direct path towards the feed rolls of the forage harvester.

              Applications
              When harvesting maize over 4.00 metres, odd row width for example 38 inch (=96 cm), thin stemmed crops and extreme laid crops, the 460plus shows its real ability.

              Road transport
              The machine is folded hydraulically to a transport width of 3 m.

              Cutting sytem
              Row independent cutting system with high speed cutting rotors and freewheel mechanism.

              Technical specifications
              Here you will find information about, working width, transport width etc.

              Standard equipment
              The 460plus has extensive standard equipment. Furhter we have several options available like the electro hydraulic lateral tilt frame, Kemper row guidance, attachable crop lifters, etc.

            • Harvesting header 475plus

            • 7.5 m working width

              475plus – even greater reach

              The ideal header for harvesting high-yielding maize.

              With a working width of 7.5m, the 475plus is the largest header in the 400plus series. The two, small outer conveying drums, which reliably transfer the maize inwards towards the large drums, are a special feature.

              Applications
              When harvesting maize over 4.00 metres, odd row width for example 38 inch (=96 cm), thin stemmed crops and extreme laid crops, the 475 shows its real ability

              Road transport
              The machine is folded hydraulically to a transport width of 3.3m.

              Cutting sytem
              Row independent cutting system with high speed cutting rotors and freewheel mechanism.

              Technical specifications
              Here you will find information about, working width, transport width etc.

              Equipment
              The 475 has extensive standard equipment. Furhter we have several options available like the electro hydraulic lateral tilt frame, Kemper row guidance, etc.

          • Tractor mounted choppers

          • Kemper offers a complete range of tractor mounted choppers with row independent heads. Working withs of 1,25m, 2,25m and 3m
              • C1200

              • The compact , "small" mounted forage harvester with versatile mounting options.
                即使在最小的模型,美联储parall作物el to the chopping blades. This delivers optimum chopping quality. The C 1200 is remarkably compact in construction. Even 90 h.p. tractors can drive the 2-row model. Optimum cutting height is determined by the tractor hydraulics. The stabiliser wheel at the side protects the harvester from contact with the ground.

                Rotary intake system
                Intake drums with aggressive prong sections

                Cutting system
                The stemmed crops are being cut off with high speed of the cutting blades.

                Technical data
                Here you can find information about length, working width, transport width, and more.

                Chopping quality
                The rotating intake guarantees an even feed of the crops in vertical direction towards the chopping unit. An excellent chopping quality is achieved by the high speed chopping wheel.

              • C 2200

              • C 2200 – A compact 3-row chopper with exchangeable headers for mais or grass
                Whether mounted at the front or the rear, the C 2200 3-row model can chop maize. The gauge wheels at the side protect the harvester from contact with the ground. Separate, hydraulic cylinder provides optimal adjustment to the cutting height. The C 2200 consists of the header and the chopping unit with a spout as one compact attachement. A maize harvesting header or a grass pick-up can optionally be mounted. A metal detector is available as an option.

                Rotary intake system
                The intake drums with aggressive prong sections enable the almost complete intake of the crops harvested

                Cutting system
                The stemmed crops are being cut off with high speed of the cutting blades (without counter blade) of the mowing drums over the complete width.

                Technical data
                Information about length, weight, working width and more

                Chopping quality
                The rotary intake system is the key for a high chopping quality and correct feeding of the flywheel

              • C3000

              • C 3000 - 4 rows full power for tractors with reverse drive capability
                A lot of technical details offers the possibility to adjust the chopper for different conditions. The result is a chopping quality as good as a self proppeld forage harvester. Maize, grass or whole crop silage chopping is possible due to different optional equipement.

                Rotary intake system
                The intake drums with aggressive prong sections enable the almost complete intake of the crops harvested

                Cutting system
                The stemmed crops are being cut off with high speed of the cutting blades.

                Technical data
                Information about length, weight, working width and more

                Chopping quality
                The rotating intake guarantees an even feed of the crops in vertical direction towards the chopping unit.