By combining two skills: the steel structure and the manufacture of lifting and handling equipment, ADC implements a unique synergy.
These high performance equipment (capacities of up to 200t and lifting speed up to 90 m/min) are developed according to customers’ specifications.
Designed with an open kinematics, our electric winches can be composed of branded equipment chosen by the customer, such as reducers, engines and brakes.
M6至M8,密集使用,高安全性
另外并应要求:
Designed to handle light weights, the chain hoists are light with a compact and robust design, reduced maintenance and simple to use.
ADC distributes and assembles reliable brands that are famous on the market.
该范围覆盖80公斤至20吨,还可以偶尔繁重。
The ADC single girder overhead travelling cranes are adapted for a wide range of daily usage in plants and workshops to ease material flow.
These overhead travelling cranes are built for your lifting needs up to 12.5t and up to 30 meters span, and can be installed in new or existing buildings.
我们的单梁高架移动式起重机built either with rolled section or welded box sections depending on load and span. Girders are made on automatic welding bench in our plant.
The highly important connection between girder and end-carriage deserves a special attention to avoid long term wear and is accurately prepared on assembly bench.
Our single girder overhead traveling cranes are equipped with low headroom wire rope hoist and enable a maximum lifting height. The ADC wire rope hoists, also designed and manufactured in Parthenay, this makes ADC the only French manufacturer of complete overhead travelling cranes.
ADC also has a Steel structure department, which calculates and provides steel work and runways beam; this dual experience reinforces greatly the role of guidance and expert of our Company.
我们的高架行驶起重机是根据您的指示和我们的质量程序设计和制造的,并根据ISO 9001和欧洲材料处理联合会(FEM)的规则。我们的起重机的盒子梁是经过认证的Qualibat。
Created from tested and standardized components, ADC’s overhead travelling cranes are designed to meet a maximum of customer’s requirements.
The double girder overhead travelling cranes ADC are built for heavy loads and/or to gain lifting height.
According to the setup of your building, we can propose an adapted solution.
我们的双梁高架行驶起重机范围可达30吨和30m跨度。我们定制的高架行驶起重机范围涵盖了尺寸的特征。
The standardization of our overhead travelling cranes allow you to get a high quality equipment at a lower cost.
Our double girder overhead travelling cranes ADC are manufactured with H-Beam girder or welded-box girder.
我们所有的高架旅行起重机均在法国(法国西部)的Deux-Sèvres的Parthenay设计和制造。他们配备了ADC绳索提升机,也是在Parthenay设计和制造的,这使ADC成为唯一一家完整的高架行驶起重机的法国制造商。
A lot of installations are already in use in France and in many countries.
For complex buildings with limited space or low headroom, ADC offers a range of standard underslung crane. It runs on the runway beam directly mounted under the ceiling which is adaptable to buildings with underslung runway beams.
The underslung cranes ADC maximize the available space in buildings by reducing the clearance between hook and walls. This type of crane can be designed to allow combinations with other cranes in nearby halls so as to transfer hoists and loads between cranes and workshops.
我们的标准底型起重机范围允许在钩子下获得最大的举升高度(带有低毛线绳绳吊筒的范围)。该范围延伸到高达10吨的起重能力和最多18米的范围。
The range is adapted for chain hoist for small loads up to 3.2 tons and for rope hoist for higher lifting capacity.
ADC Underslung起重机由标准化零件建造,这使您可以以经济的价格进行维护。
我们的梁是由滚动部分或焊接盒截面构建的,具体取决于负载和跨度。大梁是在我们工厂的自动焊接长凳上制成的。
They are equipped with ADC wire rope hoists, also designed and manufactured in Parthenay, this makes ADC the only French manufacturer of complete overhead travelling cranes.
Created from tested and standardized components, ADC’s overhead travelling cranes are designed to meet a maximum of customer’s requirements.
They are designed and made according to your instructions and our quality procedures in accordance with ISO 9001 and the Rules of the European Federation of Materials Handling. The frames of our cranes are certified QUALIBAT bridges.
可以根据您的所有要求对单梁或双梁,开销或底隆,ADC高架行驶起重机进行调整。
Our technical team takes in charge the completion of your project (studies, consulting, manufacturing, assembly, maintenance (10 agencies in France)
A lot of installations are already in use in France and in many countries.
Contact us for specific developments such as:
ADC also have a Steel structure department, which calculates and provides the runways beam
ADC可以为每个特殊情况提供解决方案和适应性的制造,以满足高科技要求和工业计划的特定需求,这要归功于其机械和电气设计办公室。然后,销售工程师致力于进行安装的开发,实施和调试。
ISO9001标准的程序和欧洲机械处理联合会(FEM)的规则是我们生产不可或缺的一部分。
许多高性能设备(M8)已经在运行。
Designed to be used in existing contexts where structures cannot (either partially or fully) support the loads generated by overhead travelling cranes, gantry and semi-gantry cranes may be built from standard or specific elements to respond to production expectations.
Gantry and semi-gantry ADC allowed easy use for outside.
他们可以通过很多选择来完成。
They are designed and made according to your instructions and our quality procedures in accordance with ISO 9001 and the Rules of the European Federation of Materials Handling. The frames of our cranes are certified QUALIBAT bridges.
我们的技术团队负责您的项目完成(研究,咨询,制造,组装,维护(法国10个机构)。研究并按照有效的标准和因素来研究和进行臂芯。确定组件以确保用户具有最高的安全性。
ADC manufactures jib-cranes covering spans up to 10 meters and supporting loads up to 5 tons.
部分旋转壁或柱式式臂芯:管状轮廓,I梁三角芯芯,I型束倒置的Jib-Cranes,包括以下技术特征:
轨道和轻型起重机系统允许您:
The system design minimizes stress on building structures.
In addition, lightweight aluminum crane systems offer a great comfort of movement up to 500kg.
ADC为您提供广泛的起重平台,可达到10米的起重高度,容量为80吨。我们的专家团队设计和制造了适应的提升解决方案,以满足您的要求,约束和安装。
Steel Construction was the origin of the ATELIERS DE LA CHAINETTE, created in 1919 and which is now called ADC.
Since then, we have remained faithful to structural steel buildings. This gives us a recognised know-how.
我们在法国跨越多达65米的法国建造结构,没有中间柱。
In addition to this activity, we also produce insulated and non-insulated roofing and sidings in lacquered steel sheets or single or dual-skin sandwich panels.
由于重量和量,这种活动仅限于法国领土。