• AUTOMATION21xx

  • 提供个人资料
  • Innovative system solutions for flat surfaces

    侧面磨床生产中的核心能力。

    As a manufacturer of CNC surface grinding machines we are the right partner for companies requiring maximum accuracy (in micrometer range) and simultaneously considerable grinding allowances (in millimeter range). Professional know-how and decades of experience in surface grinding are the basis for all custom tailored solutions from DISKUS. DISKUS is the right address for all companies requiring grinding machines for grinding flat surfaces on one or both sides.

Product Portfolio
  • 水平的Spindel

      • ddw ... xr双层磨床,水平纺锤

      • 强调
        • Machine frame with insulating material
        • 回火电动机驱动的纺锤体
        • 数字驱动器
        • 自负的线性轴承

        该机器类型是一种钢盒框架焊接结构,具有两个相同轴的相对水平磨轴。这些是直接驱动的液体冷却电动机驱动的纺锤体,其主轴驱动器的电动机输出为24 kW至100 kW。

        各种类型的工件运输是可能的。也可以选择线性工件饲料,具体取决于工件几何形状。在这种情况下,工件在磨削工具的指南轨帮助下进行喂食和指导。在出院时,圆盘自身的离子100%测量控制的每个部分。该后处理测量控制的测量结果将转移到西门子840D机器控制上,并根据需要用于自动校正。

        Technical Data

        Machine types available in this series:
        • DDW 400 XR - Max. workpiece: 80 x 20mm
        • DDW 600 XR - Max. workpiece: 80 x 30mm
        • DDW 900 XR - Max. workpiece: 150 x 50mm
        The following grinding agents can be used:
        • DDW 400 XR:刚果,CBN或钻石
        • DDW 600 XR: Corundum, CBN or diamond
        • DDW 900 XR:刚果或CBN
      • DDW ... XL双层磨床,水平纺锤

      • 该机器类型是一种钢盒框架焊接结构,具有两个相同轴的相对水平磨轴。这些是直接驱动的液体冷却电动机驱动的纺锤体,其主轴驱动器的电动机输出为24 kW至100 kW。各种类型的工件运输是可能的。也可以选择线性工件饲料,具体取决于工件几何形状。在这种情况下,工件在磨削工具的指南轨帮助下进行喂食和指导。在出院时,圆盘自身的离子100%测量控制的每个部分。该后处理测量控制的测量结果将转移到西门子840D机器控制上,并根据需要用于自动校正。
      • ddw ... xoz双层磨床,水平纺锤

      • 强调
        • Machine frame with insulating material
        • 回火电动机驱动的纺锤体
        • 数字驱动器
        • 自负的线性轴承

        该机器类型是一种钢盒框架焊接结构,具有两个相同轴的相对水平磨轴。这些是直接驱动的液体冷却电动机驱动的纺锤体,其主轴驱动器的电动机输出为24 kW至100 kW。各种类型的工件运输是可能的。也可以选择线性工件饲料,具体取决于工件几何形状。在这种情况下,工件在磨削工具的指南轨帮助下进行喂食和指导。在出院时,圆盘自身的离子100%测量控制的每个部分。该后处理测量控制的测量结果将转移到西门子840D机器控制上,并根据需要用于自动校正。

        Technical Data

        Machine types available in this series:
        • DDW 900 XOZ - Max. workpiece: 850 x 250mm
        • DDW 1060 XOZ-最大。工件:1000 x 350mm
        The following grinding agents can be used:
        • Corundum
      • DDW ... P双层磨床,水平纺锤

      • 机器描述

        该机器类型是一种钢盒框架焊接结构,具有两个相同轴的相对水平磨轴。这些是直接驱动的液体冷却电动机驱动的纺锤体,其主轴驱动器的电动机输出为24 kW至100 kW。各种类型的工件运输是可能的。也可以选择线性工件饲料,具体取决于工件几何形状。在这种情况下,工件在磨削工具的指南轨帮助下进行喂食和指导。在出院时,圆盘自身的离子100%测量控制的每个部分。该后处理测量控制的测量结果将转移到西门子840D机器控制上,并根据需要用于自动校正。
    • 垂直主轴

        • DDS ... XR圆盘双层侧面磨石机带垂直纺锤体

        • 强调
          • Machine frame with insulating material
          • 回火电动机驱动的纺锤体
          • 数字驱动器
          • 自负的线性轴承

          该机器类型由钢焊接框架设计组成,该设计的弯曲强度比可比的门户机器更高。它具有两个垂直直接电动机驱动的纺锤体,位于同一轴上,并带有液体冷却。这些纺锤体中的每一个均由23 kW至48 kW驱动。它们连接到带有自动对准轴承的紧凑型幻灯片上,该轴承使用精确的螺丝驱动器执行所有进发底式运动和返回运动。
          The machine type required for your application can be used as a plunge cut as well as through-feed machine. The planetary gear drive provided allows a number of workpieces to be machined simultaneously with controlled rotation. The grinding tools infeed using the plunge cut method while positioned in a planetary gear rotating around its own axis. The same machine can be used for through-feed by replacing the transport plates.

          Technical Data

          Machine types available in this series:
          • DDS 457 XR
          • DDS 600 XR
          • DDS 750 XR
          The following grinding agents can be used:
          • Corundum
          • CBN
          • Diamond
        • DDS ... XL

        • 强调
          • Machine frame with insulating material
          • 回火电动机驱动的纺锤体
          • 数字驱动器
          • 自负的线性轴承
          • 线性工件流

          Technical Data

          Machine types available in this series:
          • DDS 600 XL
          The following grinding agents can be used:
          • Corundum
          • CBN
          • Diamond
        • DDS ... XRE

        • 强调
          • Machine frame with insulating material
          • 回火电动机驱动的纺锤体
          • 数字驱动器
          • 自负的线性轴承
          • Plunge cut grinding with one single planetary drive

          Technical Data

          Machine types available in this series:
          • DDS 457 XRE - Max. workpiece dia.: 205mm
          • DDS 600 XRE-最大。工件直径:250mm
          • DDS 750 XRE-最大。工件直径:420mm
          The following grinding agents can be used:
          • Corundum
          • CBN
          • Diamond
        • DHS ... XOZ圆盘侧面磨床机,带动垂直主轴

        • 强调
          • Machine frame with insulating material
          • Tempered motor-driven spindle
          • 数字驱动器, alternatively with linear motor
          • Column saddle with movable grinding spindle
          • 自负的线性轴承
          • Pendulum processing possible

          该机器类型是具有垂直电动机驱动纺锤体的机器。使用专为特定类型的工作类型的夹具对工件进行夹紧和接地。设备被固定在机床上。电动机主轴安装,用作下馈,敷料和振荡马车上的圆柱鞍座。

          The unfinished and finished parts are transported by an automatic charging/discharging system, which can be installed parallel to the machine in various directions for the operating sequence. The workpieces are clamped with clamping devices designed for the specific type of work.
          The machine has 2 clamping devices and one grinding tool. While the first workpiece is being ground at station "A", a second workpiece is simultaneously discharged and a new workpiece charged. In the next cycle, the workpiece at station "B" is ground, while the first workpiece is moved out and a new workpiece loaded again. During this cycle, the wet grinding area is locked to protect the operator.

          工件与极高的pre可以测量cision during the program sequence with the built-in measuring system. The measuring results can be used for dimensional corrections on the machine if required.

          Technical Data

          Machine types available in this series:
          • DHS 457 XOZ - Max. workpiece: 1000 x 350mm
          The following grinding agents can be used:
          • Corundum
          • CBN
          • Diamond
        • DS ... XOZ圆盘侧面表面磨床,带有固定的垂直主轴。

        • 强调
          • Machine frame with insulating material
          • 回火电动机驱动的纺锤体
          • 数字驱动器
          • Column saddle / pick up principle
          • Stationary grinding spindle
          • 自负的线性轴承

          该机器类型具有垂直的固定电动机驱动磨轴。这些工件被带到圆柱鞍和夹紧装置中的磨碎工具。磨削过程本身可以通过插入磨碎或插入振荡的磨削来完成,从而用z轴沿垂直方向完成下降的馈送,并用x轴振荡。磨削工具可以配以安装在圆柱鞍座上的敷料工具。

          The unfinished parts are fed in and the finished parts are moved out by a feed/discharge belt. The present column saddle simultaneously serves as a pickup unit with which the workpieces are moved into the operating chamber and back to the conveyor belt.

          Separating modules are available for the feed/discharge belt as options as well as turning stations for grinding both sides. Double clamping devices as well as rotating clamping devices can be mounted on the column saddle depending on the size of the workpiece as well as the tolerances for evenness and parallelity.

          Technical Data

          Machine types available in this series:
          • DS 400 XOZ-最大。工件:1000 x 350mm
          The following grinding agents can be used:
          • Corundum
          • CBN
          • Diamond
        • DSR ... XOZ lateral surface grinding machine turntable with moving vertical spindle

        • 这种机器类型是DS系列的进步。它取代了数十年来熟悉的DSR版本。DS系列中使用了机器框架的框架设计,焊接的钢结构用作“拾音器”。它具有两个垂直电动机驱动的磨轴,每个纺锤体都安装在圆柱鞍座上,从而可以根据需要将其放置在操作区域中。研磨工具的工作表面向下指向。用于安装工件夹具的转盘位于研磨工具下方的机床上。开关柜连接到机器框架的后部。西门子840D用于对照。特殊的夹紧装置,磁性碎屑,导罩和夹克可以用于打磨各种工件。该机器可以配备多个阶段的一或两边磨削。 This makes grinding and brush deburring possible in one cycle. This makes the machine ideal for processing symmetrical or asymmetrical incremental or equally thick workpieces.