Visit us on:
Pneumatic Manipulator with swivel rigid arms, the smallest one of its category. Developed for handling light products even special shaped, is ideal for elevated working cycles.
明度、精度和敏捷性是主要的壮举ures of this manipulator. It can be completed with custom made gripping tools, designed and studied according to specific customer's requirements: pneumatic grabs, suction cups, special hooks and many more.
TECHNICHAL CHARACTERISTICS
| Operation: | pneumatic only |
| Transmission: | through a parallelogram and terminal arm |
| Configuration : | - column mounted fixed to the floor - column mounted on self standing base plate - fixed overhead - overhead on rails |
| Net capacity: | 115 Kg * (2100 mm radius) |
| Radius max: | 3100 mm* (range 60 kg) |
| Radius min: | 400 mm |
| Vertical stroke: | 1250 - 1500 mm |
| Supply: | from 0.5 to 0.8 MPa of clean, dry and oil free compressed air |
| Column axle: | 360° continuous rotation |
| Intermediate axle: | max 300° rotation |
| Noise level: | <70 dB |
Pneumatic rigid arm manipulator with swivel arms, the right compromise between capacity and agility. Ideal for handling medium weights, gives its best adapting to many common working situations.
完成与一个特定的扣人心弦的工具它给the opportunity to handle even offset products in any direction without big effort.
TECHNICAL CHARACTERISTICS
| Operation: | pneumatic only |
| Transmission: | through a parallelogram and terminal arm |
| Configuration : | - column mounted fixed to the floor - column mounted on self standing base plate - fixed overhead - overhead on rails |
| Net capacity: | 180公斤*(2900毫米半径) |
| Radius max: | 4000 mm* (range 100 kg) |
| Radius min: | 400 mm |
| Vertical stroke: | 1500 - 1750 - 2050 mm |
| Supply: | from 0.5 to 0.8 MPa of clean, dry and oil free compressed air |
| Column axle: | 360° continuous rotation |
| Intermediate axle: | max 300° rotation |
| Noise level: | <70 dB |
Pneumatic manipulator with swivel rigid arms, is the higher capacity model of ATISMIRUS 100. Developed with the same technical and structural characteristics, is equipped with additional pneumatic cylinder to obtain higher capacities and longer radiuses.
Also this manipulator can be integrated with a customized gripping tool to comply with customer's needs.
TECHNICAL CHARACTERISTICS
| Operation: | pneumatic only |
| Transmission: | through a parallelogram and terminal arm |
| Configuration : | - column mounted fixed to the floor - column mounted on self standing base plate - fixed overhead - overhead on rails |
| Net capacity: | 260 Kg * (2450 mm radius) |
| Radius max: | 3250 mm* (range 180 kg) |
| Radius min: | 400 mm |
| Vertical stroke: | 1500 - 1750 - 2050 mm |
| Supply: | from 0.5 to 0.8 MPa of clean, dry and oil free compressed air |
| Column axle: | 360° continuous rotation |
| Intermediate axle: | max 300° rotation |
| Noise level: | <70 dB |
Pneumatic Manipulator with articulated rigid arms, is the solution for higher capacities. Designed for increased performance and capacity, always fulfils highest accuracy and ergonomics, even in the most critical conditions.
Reliability and safety with bulky and heavy loads makes this model the right choice for heavy industry, while our technical experience completes it with customized gripping tools to comply with customer's requirements.
TECHNICAL CHARACTERISTICS
| Operation: | pneumatic only |
| Transmission: | through a parallelogram and terminal arm |
| Configuration : | - column mounted fixed to the floor - column mounted on self standing base plate - fixed overhead - overhead on rails |
| Net capacity: | 440 Kg * (2450 mm radius) |
| Radius max: | 4400mm* (range 200 kg) |
| Radius min: | 400 mm |
| Vertical stroke: | 1500 - 1750 - 2050 - 2300 mm |
| Supply: | from 0.5 to 0.8 MPa of clean, dry and oil free compressed air |
| Column axle: | 360° continuous rotation |
| Intermediate axle: | max 300° rotation |
| Noise level: | <70 dB |
Pneumatic rigid arm manipulator with swivel arms, is the evolution of the previous model with higher capacity. Provided with improved technical and structural features, it is equipped with an enhanced cylinder in order to handle very heavy loads and to achieve longer radiuses.
Customised gripping tools are developed according to customer's requests and the higher capacity allows even more specific personalization.
TECHNICAL CHARACTERISTICS
| Operation: | pneumatic only |
| Transmission: | through a parallelogram and terminal arm |
| Configuration : | - column mounted fixed to the floor - column mounted on self standing base plate - fixed overhead - overhead on rails |
| Net capacity: | 600 Kg * (2700 mm radius) |
| Radius max: | 4000mm* (range 300 kg) |
| Radius min: | 400 mm |
| Vertical stroke: | 1500 - 1750 - 2050 - 2300 mm |
| Supply: | from 0.5 to 0.8 MPa of clean, dry and oil free compressed air |
| Column axle: | 360° continuous rotation |
| Intermediate axle: | max 300° rotation |
| Noise level: | <70 dB |
Like all ATISACER manipulators, ATISACER 55 is provided with double wire rope trasmission system combined with a pneumatic cylinder.
ATISACER 55 is the smallest of the family, light and easy to handle for loads up to 50 Kg.; it allows the handling of many kind of products in easy and safe way, thanks to the special gripping tools that can be integrated.
To grant most safety ATISACER 55 works with double rope, it's furthermore provided with load and no-load balancing system. The operator acts directly on the product or on the tool, with high precision and without effort.
If needed ATISACER 55 manipulator can be provided with a "sensitive" handle, which allows to operate on variable weight products just acting on it. Also this manipulator can be installed on column, both mounted fixed to the floor and on transportable self standing base, or overhead fixed or on rails.
TECHNICAL CHARACTERISTICS
| Operation: | pneumatic only |
| Transmission: | double rope system |
| Configuration : | - column mounted fixed to the floor - column mounted on self standing base plate - fixed overhead - overhead on rails |
| Net capacity: | 55 Kg *(2500 mm radius) |
| Radius max: | 1600 mm |
| Radius min: | 400 mm |
| Vertical stroke: | 1500 - 1750 - 2050 - 2300 mm |
| Supply: | from 0.5 to 0.8 MPa of clean, dry and oil free compressed air |
| Column axle: | 360° continuous rotation |
| Intermediate axle: | max 300° rotation |
| Noise level: | <70 dB |
ATISACER 80 is the newest member of ATISACER family, provided with double rope system and pneumatic cylinder. It completes the range of ATIS' rope system manipulators.
The pneumatic system of the manipulator allows balanced movements, both with and without load. Integrated with standard hook or with special gripping tools ATISACER gives its best in small and constricted working areas.
The manipulator is provided with certified accumulation tank to allow the operator to carry out the handling process in case the main air supply fails. It's furthermore provided with double safety ropes. It mounts also double braking pads on the main axle and on medium joint as well.
ATISACER 80 turns out very easy to handle, lightweight and quick-moving.
TECHNICAL CHARACTERISTICS
| Operation: | pneumatic only |
| Transmission: | double rope system |
| Configuration : | - column mounted fixed to the floor - column mounted on self standing base plate - fixed overhead - overhead on rails |
| Net capacity: | 80 Kg *(3100 mm radius) |
| Radius max: | 4000 mmspan> |
| Radius min: | 400 mm |
| Vertical stroke: | 1800 mm |
| Supply: | from 0.5 to 0.8 MPa of clean, dry and oil free compressed air |
| Column axle: | 360° continuous rotation |
| Intermediate axle: | 300° rotation with mechanical stop |
| Noise level: | <70 dB |
ATISACER 150 is the biggest of ATISACER family, provided with rope system and pneumatic cylinder. The pneumatic system of the manipulator allows balanced movements, both with and without load. Integrated with standard hook or with special gripping tools ATISACER gives its best in small and constricted working areas.
The manipulator is provided with certified accumulation tank to allow the operator to carry out the handling process in case the main air supply fails. It's furthermore provided with double safety ropes. It mounts also double braking pads on the main axle and on medium joint as well.
ATISACER 150 turns out very easy to handle, lightweight and quick-moving
TECHNICAL CHARACTERISTICS
| Operation: | pneumatic only |
| Transmission: | double rope system |
| Configuration : | - column mounted fixed to the floor - column mounted on self standing base plate - fixed overhead - overhead on rails |
| Net capacity: | 55 Kg *(2500 mm radius) |
| Radius max: | 1600 mm |
| Radius min: | 400 mm |
| Vertical stroke: | 1500 - 1750 - 2050 - 2300 mm |
| Supply: | from 0.5 to 0.8 MPa of clean, dry and oil free compressed air |
| Column axle: | 360° continuous rotation |
| Intermediate axle: | max 300° rotation |
| Noise level: | <70 dB |
ATISFERAX– lever actionable manipulators with vertical movement and ability to handle load extremely well and precise in any direction.
These are extraordinarily lightweight manipulators, with minimum resistance to change of movements, undoubtedly optimise the most extreme cycle time requirement and notably reduce the stresses on operators.
ATISFERAXis a unique manipulator of its kind, one of many INNOVATIONS by ATIS in this area:
