OCME SOLUTIONS are designed and manufactured in Emilia Romagna, home of the Italian packaging machinery industry.
Virgo, which is flexible and can be realized either with neck or body handling, can satisfy all requirements in terms of production speed and type of containers.
Virgo ensures the highest filling accuracy thanks to its highly advanced electronics based on algorithms developed during 20 years of application.
The rejection system at machine outfeed discards non-conforming product. By the end of the production cycle, all the product inside Virgo is recovered in order to minimize waste.
Virgo is equipped with a control unit dedicated to safety management, ensuring maximum reliability, all including stainless steel and tempered glass perimeter guards . Finally, the machine control and supervisor PC allows to monitor weighing statistics and data logging for each container. This ensures maximum control of production batches.
Vega HT is the solution to the problem of handling thinner film and
lighter bottles whilst ensuring total adaptability to different packaging format, reduced changeover times and reduced energy consumption.
Vega HT is available in various versions: film only, flat pad and film, tray and film with flat pad,...
The range is completed by the Vega HT Advance version for high speeds, from 100 to 150 cycles/minute.
Since then, OCME has followed a programme of continuous development and improvement which has led to the Altair range we have today. OCME focused on high efficiency and high productivity installations, destined to various product sectors such as edible oil, lube oil and beverage.
In addition to producing cartons, OCME's whole range of wrap-around packers offer the possibility to process trays. The complete series proposes as well the possibility to insert partitions (pre-formed or traditionnal).
Gemini HT combines all the advantages of Altair wrap-around packers and Vega shrink-wrap packers. Our focus is on high efficiency and high productivity installations, destined to various product sectors, such as Edible oil, Lube oil and Beverage.
OCME, that has always been a point of reference in palletising sector, is present with its products in several sectors.
From beverage to tissue, from food to petrochemical, OCME offers the most suitable solution. The high level of technology applied (numerous patents have been registered) enables the construction of traditional, robotic or mixed technology solutions.
The range of OCME palletisers includes machines with low or high level product infeed, either in-line ot at 90 degrees, equipped with customised row or layer gripping heads, according to the product to be handled.
DEPALLETISING
OCME depalletisers are known all over the world for their strength and reliability.
OCME is present in the Beverage, Food, Home and Personal care, Edible oil and Petrochemical sectors.
Our range of depalletisers includes machines with low or high level product infeed, with steady or moving pallet, with layer transfer by rotating bar or gripping head with self-centring plates. The high level of technology applied enables the construction of traditional or robotic solutions.
Once the layer has been formed, the product is transferred towards the machine by a pusher and placed onto the pallet, with the possibility to have flat pads being inserted.
The Perseus Z model derived from the N model, with the only difference of the integrated layer pushing system.
The range is completed by the Perseus F model, specifically designed to process 60 L and 200 L drums.
一旦层被形成的Mizar forming unit, the product will be transferred towards the machine and placed onto the pallet, with the possibility to insert flat pads.
The Orion Z model derived from the N model with the only difference of the integrated layer pushing system.
范围是猎户座推进模型,完成a low level infeed palletiser with double sliding table ensuring high performance with reduced dimensions.
The first phase is the pallet unwrapping cycle. An operator platform enables the pallet to be reached easily, allowing to carry out any necessary operation in the safest possible conditions. Once unwrapped, the pallet can enter the machine.
The layer is transferred by our gripping head, with self-centring plates (LF) or rotating bars (HM). Layer-pads, frames and top sheets are picked up by the dedicated beam or column-type devices. At last, the packs are extracted and proceed in a single row.
Our range is composed of traditional solutions designed to handle boxes, such as our Antares depalletiser, as well as robotic solutions for bulk trays or containers.
Our experience in handling products of diffehttps://www.ocme.com/en/perseus-p278hnology and innovative solutions to answer all your needs.
These vehicles are free to move at high speed and they are not anchored to structures embedded in the floor, and any change to vehicle routes
can be made by simply modifying the software.
Thanks to the wheels position in relation to the load being carried, the PS model can move up to 1.500 kg, while being a machine of reduced dimensions.
Auriga PS is therefore ideal to work in reduced space, between production lines for instance, or in warehouses as well.
These vehicles are designed for transporting any type of product. The Auriga CT range goes from the smaller model, Auriga 8CT,
ideal to move in reduced space with load capacity of 800 kg, to larger models, such as Auriga 45 CT, used to transport 3 pallets
with maximum load capacity of 4.500 kg.
Our conveyor vehicles are designed to move the product from one conveyor to another. The Auriga C range goes from Auriga C1, which transports one single pallet, up to the larger Auriga C4, which transports 4 pallets simultaneously.