Videos
Loading the player ...
- Offer Profile
- Weighing Solutions based on Capacitive Digital Technology
Since the foundation in 1969, the Eilersen companies in Denmark and Switzerland have been dedicated to the development, manufacture and supply of high quality, robust industrial sensors based on capacitive technology for the measurement of force and weight.
Patented Technology with Unique Advantages
This extensive know-how is patented worldwide and applied in the current range of digital load cells. The capacitive technology developed by Eilersen features a number of advantages compared to other technologies used in transducers for measuring force and weight, such as high accuracy (up to 99.99%), outstanding reliability, simple mechanical and electrical installation, and minimal maintenance for use in tough and demanding industrial applications.
Product Portfolio
Digital Load Cells
Made in Denmark - Trusted worldwide
Eilersen offers a range of high quality digital load cells covering all industrial applications. Eilersen stainless steel load cells tolerate up to 10 times overload and are available in OIML and ATEX versions.-
-
Compression Load Cell DLC (DLC-Ex)
-
- 与综合发射新的电容性负载细胞protection (Patent Pending) for installations e.g. in areas with seismic activity, outdoor silos and high shear mixers. These robust digital compression load cells in EHEDG compliant design are produced in electropolished stainless steel and hermetically sealed to IP68. The load cells type DLC-Ex can be used in ATEX (Ex) and IECEx applications (Zone 1, 2, 21 and 22)
- Capacity (Emax)
50, 100, 150, 250, 500, 1000, 1500, 2000, 3000, 4000, 5000kg
- Accuracy
Industrial 0.10%, Precision 0.05%, High Precision 0.025%
- Overload Tolerance
Up to 500% of rated capacity
Applications
- Outdoor silos
- Tank weighing
- Process weighing
- 嗨gh shear mixers
- Big-bag equipment Filling and dosing
- Offshore Installations in seismic area
- Level measurement
- Platform scales
- 料斗秤
- Heavy duty applications
- Belt scales
-
Compression Load Cell CL (CL-Ex)
-
- NEW hygienic (aseptic) compression load cell types CL and CL-Ex in EHEDG compliant design. These robust digital compression load cells are produced in electropolished stainless steel and hermetically sealed to IP68 for hygienic weighing installations, installations in tough environments and general process weighing. The load cells can be supplied with a hygienic base plate in AISI316. The compression load cell type CL-Ex can be used in ATEX (Ex) and IECEx applications (Zone 1, 2, 21 and 22)
- Capacity (Emax)
50, 100, 150, 250, 500, 1000, 1500, 2000, 3000, 4000, 5000kg
- Accuracy
Industrial 0.10%, Precision 0.05%, High Precision 0.025%
- Overload Tolerance
Up to 500% of rated capacity
Applications
- Tank weighing
- Process weighing
- Big-bag equipment
- Filling and dosing
- Offshore Level measurement
- Platform scales
- 料斗秤
- Heavy duty applications
- Belt scales
-
Compression Load Cell CM (CM-Ex)
-
- NEW hygienic (aseptic) compression load cell types CM and CM-Ex in EHEDG compliant design. These robust digital compression load cells are produced in electropolished stainless steel and hermetically sealed to IP68 for hygienic weighing installations, installations in tough environments and general process weighing. The load cells can be supplied with a hygienic base plate in AISI316. The compression load cell type CM-Ex can be used in ATEX (Ex) and IECEx applications (Zone 1, 2, 21 and 22)
- Capacity (Emax)
6000, 8000, 10000, 12000, 15000, 20000, 25000, 30000kg
- Accuracy
Industrial 0.10%, Precision 0.05%
- Overload Tolerance
Up to 500% of rated capacity
Applications
- Tank weighing
- Process weighing
- Level measurement
- Filling and dosing
- Large Vessels
- Offshore applications
- Heavy duty applications
-
Hygienic Beam Load Cell HBL
-
- 数码卫生梁dynami负载细胞c weighing, multihead scales, combination weighers, small tanks and vessels. The hygienic design of the HBL load cell is unique and ensures an easy to clean installation and a very high resonance frequency (spring rate) for rapid dynamic weighing. The hygienic load cell type HBL-Ex can be used in ATEX (Ex) and IECEx applications (Zone 1, 2, 21 and 22)
- Capacity (Emax)
5, 10, 20, 30, 50, 100, 150kg
- Accuracy
Industrial 0.025% Precision 0.015% High Precision 0.010%
- Overload Tolerance
Up to 1000% of rated capacity
Applications
- Hygienic weighing
- Combination weighers
- Multihead weighers
- Filling machines
- Small tanks and vessels
-
Single Point Load Cell XBL
-
- 数码卫生梁dynami负载细胞c weighing, multihead scales, combination weighers, small tanks and vessels. The hygienic design of the HBL load cell is unique and ensures an easy to clean installation and a very high resonance frequency (spring rate) for rapid dynamic weighing. The hygienic load cell type HBL-Ex can be used in ATEX (Ex) and IECEx applications (Zone 1, 2, 21 and 22)
- Capacity (Emax)
5, 10, 20, 30, 50, 100, 150kg
- Accuracy
Industrial 0.025% Precision 0.015% High Precision 0.010%
- Overload Tolerance
Up to 1000% of rated capacity
Applications
- Dynamic weighing
- Multihead weighers
- Factory Automation
- Packaging machines
- Filling and dosing
- Flow measurement
- Bench and platform scales
- Conveyor scales
- Process weighing
- Check weighers
-
Single Point Load Cell SPSX
-
- The robust digital single point load cell type SPSX in stainless steel is hermetically sealed to IP69K. The main applications are graders, multihead weighers, checkweighers, filling machines, belt scales, platform scales, bench scales etc. ATEX (Ex) and IECEx approved versions are available
- Capacity (Emax)
5, 10, 20, 30, 50, 100, 150, 200kg
- Accuracy
Industrial 0.025% Precision 0.015% High Precision 0.010%
- Overload Tolerance
Up to 1000% of rated capacity
Applications
- Dynamic weighing
- Multihead weighers
- Factory Automation
- Packaging machines
- Filling and dosing
- Flow measurement
- Bench and platform scales
- Conveyor scales
- Process weighing
- Check weighers
-
Single Point Load Cell SPSXL
-
- The robust digital single point load cell type SPSXL in stainless steel is hermetically sealed to IP69K. The main applications are graders, checkweighers, filling and dosing equipment, belt scales, platform scales, bench scales etc. ATEX (Ex) and IECEx approved versions are available
- Capacity (Emax)
20、50、100、150、200、250公斤
- Accuracy
Industrial 0.025% Precision 0.015%
- Overload Tolerance
Up to 1000% of rated capacity
Applications
- Dynamic weighing
- Multihead weighers
- Factory Automation
- Packaging machines
- Filling and dosing
- Flow measurement
- Bench and platform scales
- Conveyor scales
- Process weighing
- Check weighers
-
梁加载细胞提单(BL-Ex)
-
- NEW robust digital beam load cell in a new hygienic (aseptic) design for dynamic weighing, process weighing, filling, packaging and general weighing in primarily FOOD and PHARMA applications. The new hygienic design in stainless steel is without gaps or edges for easy cleaning in order to minimize the risk of bacteria growth. The BL-Ex load cell is certified for installation in ATEX (Ex) and IECEx environment (Zone 1, 2, 21 and 22) but can also be used in non-ATEX (Ex) rated area
- Capacity (Emax)
10, 20, 30, 50,100, 150, 250, 500, 1000kg
- Accuracy
Industrial 0.10%, Precision 0.05%, High Precision 0.025%
- Overload Tolerance
500% at 5kg, 200% at 1000kg capacity
Applications
- Dynamic weighing
- Process weighing
- Tanks and vessels
- Vibration sorters
- Filling and dosing
- Platform scales
- Packaging machines
- 料斗秤
- Belt scales
- Conveyor scales
- Big-bag equipment
- On-board weighing
-
Beam Load Cell BM 70 (BM-Ex 70)
-
- 健壮的数码网络tal heavy duty ATEX certified beam load cell produced in stainless steel and hermetically sealed to IP68 for process weighing, industrial weighing and tough applications such as on-board truck weighing, offshore, steel industry etc. The BM-Ex 70 load cell can be used in ATEX (Ex) IECEx and non-ATEX applications
- Capacity (Emax)
1000, 2000, 3000kg
- Accuracy
Industrial 0.10%, Precision 0.05%, High Precision 0.025%
- Overload Tolerance
Up to 500% of rated capacity
Applications
- Dynamic weighing
- Process weighing
- Mobile weighing
- Vibration feeders
- Big-bag equipment
- 料斗秤
- Conveyor scales
- Heavy duty platform scales
- Heavy duty applications
- Offshore applications
-
Beam Load Cell BM 80 (BM-Ex 80)
-
- 健壮的数码网络tal heavy duty ATEX certified beam load cell produced in stainless steel and hermetically sealed to IP68 for process weighing, industrial weighing and tough applications such as on-board truck weighing, offshore, steel industry etc. The BM-Ex 80 load cell can be used in ATEX (Ex) IECEx and non-ATEX applications
- Capacity (Emax)
5000, 6000, 7000kg
- Accuracy
Industrial 0.10%, Precision 0.05%, High Precision 0.025%
- Overload Tolerance
Up to 500% of rated capacity
Applications
- Dynamic weighing
- Process weighing
- Mobile weighing
- Vibration feeders
- Big-bag equipment
- 料斗秤
- Conveyor scales
- Heavy duty platform scales
- Heavy duty applications
- Offshore applications
-
Compression Load Cell CH (CH-Ex) 100
-
- 健壮的数码网络tal ATEX and IECEx certified heavy duty compression load cell produced in stainless steel and hermetically sealed to IP68 for installation under large silos, tanks, vessels and heavy duty applications. The CH-Ex load cell can be used in ATEX (Ex) IECEx and non-ATEX applications
- Capacity (Emax)
100tons
- Accuracy
Industrial 0.25%
- Overload Tolerance
Up to 300% of rated capacity
Applications
- Silo weighing
- Process weighing
- Heavy duty applications
- Level measurement
- Offshore applications
-
Compression Load Cell CH (CH-Ex) 500
-
- 健壮的数码网络tal ATEX and IECEx certified heavy duty compression load cell produced in stainless steel and hermetically sealed to IP68 for installation under large silos, tanks, vessels and heavy duty applications. The CH-Ex load cell can be used in ATEX (Ex) IECEx and non-ATEX applications
- Capacity (Emax)
200, 300, 400, 500tons
- Accuracy
Industrial 0.25%
- Overload Tolerance
Up to 300% of rated capacity
Applications
- Silo weighing
- Process weighing
- Heavy duty applications
- Level measurement
- Offshore applications
-
Beam Loam Cell SDC
-
- Compact digital beam load cell for dynamic weighing, web tension measurement, process weighing, force measurement and general industrial weighing. This load cell is a short version of the SD beam load cell and produced in stainless steel and laser welded (IP68)
- Capacity (Emax)
1, 2, 5, 10, 20, 30, 50, 100kg
- Accuracy
Industrial 0.10%, Precision 0.05%, High Precision 0.025%
- Overload Tolerance
500% at 2kg, 200% at 100kg capacity
Applications
- Web tension measurement
- Force measurement
- Dynamic weighing
- Process weighing
- Small tanks and vessels
- Vibration sorters
- Filling and dosing
-
Tension Load Cell TM
-
- The robust digital tension load cell type TM is produced in stainless steel and used for weighing suspended vessels, in cranes, lifts and for measuring forces in heavy duty equipment. ATEX versions are available
- Capacity (Emax)
2000, 5000, 10000kg
- Accuracy
Industrial 0.10%
- Overload Tolerance
Up to 1000% of rated capacity
Applications
- Under-hook crane weighing
- Force measurement
- Cable Tension monitoring
- Heavy duty applications
- Crane and Hoist Load Testing and monitoring
- Weighing suspended vessels
- Water Weight/Bag Calibration
- Towing and mooring load monitoring
- Anchor line tension monitoring
- Offshore and Marine applications
- Crane Load Calibration
- Subsea Vehicle Lifting
- Onshore and Offshore wind turbine
-
Heavy Duty Load Cell SDLX
-
- The robust digital load cell type SDLX is produced in stainless steel and designed for the extremely though environment in lift systems for waste management with shock loads and vibrations. The load cell can also be used in general industrial weighing applications. OIML certified to class C3 according to OIML R60
- Capacity (Emax)
300kg
- Accuracy
OIML class C3
- Overload Tolerance
Up to 500% of rated capacity
Applications
- On-board truck weighing
- Process weighing
- Offshore/Marine applications
- Force measurement
- Mobile weighing
- Heavy duty applications
-
Beam Load Cell SD
-
- 健壮的数码网络tal OIML certified beam load cell for dynamic weighing, process weighing and general industrial weighing. Application examples are belt scales, platform scales, small vessels, filling machines, process equipment etc. OIML certified (up to C6, MI10) according to OIML R60
- Capacity (Emax)
2, 5, 10, 20, 30, 50, 100, 150, 250, 500, 1000kg
- Accuracy
Industrial 0.10% up to OIML class C6 (MI10)
- Overload Tolerance
500% at 5kg, 200% at 1000kg capacity
Applications
- Dynamic weighing
- Process weighing
- Tanks and vessels
- Vibration sorters
- Filling and dosing
- Platform scales
- Packaging machines
- 料斗秤
- Belt scales
- Conveyor scales
- Big-bag equipment
- On-board weighing
-
Beam Load Cell SDM70
-
- 健壮的数码网络tal heavy duty beam load cell produced in stainless steel and hermetically sealed to IP68 for process weighing, industrial weighing and tough applications such as on-board truck weighing, offshore, steel industry etc. OIML certified (up to C5) according to R60
- Capacity (Emax)
1000, 2000, 3000kg
- Accuracy
Industrial 0.10% up to OIML class C5
- Overload Tolerance
Up to 500% of rated capacity
Applications
- Dynamic weighing
- Process weighing
- Mobile weighing
- Vibration feeders
- Big-bag equipment
- 料斗秤
- Conveyor scales
- Heavy duty platform scales
- Heavy duty applications
- Offshore applications
-
Beam Load Cell SDM80
-
- 健壮的数码网络tal heavy duty beam load cell produced in stainless steel and hermetically sealed to IP68 for process weighing, industrial weighing and tough applications such as on-board truck weighing, offshore, steel industry etc. OIML certified (up to C5) according to R60
- Capacity (Emax)
5000, 6000, 7000kg
- Accuracy
Industrial 0.10% up to OIML class C5
- Overload Tolerance
Up to 500% of rated capacity
Applications
- Dynamic weighing
- Process weighing
- Mobile weighing
- Vibration feeders
- Big-bag equipment
- 料斗秤
- Conveyor scales
- Heavy duty platform scales
- Heavy duty applications
- Offshore applications
-
Compression Load Cell MD
-
- 健壮的数码网络tal compression load cell produced in stainless steel and hermetically sealed to IP68 for hygienic weighing installations, installations in tough environments and general process weighing
- Capacity (Emax)
50, 100, 150, 250, 500, 1000, 1500, 2000, 3000, 4000, 5000kg
- Accuracy
Industrial 0.10%, Precision 0.05%, High Precision 0.025%
- Overload Tolerance
500% at 50kg, 200% at 5000kg capacity
Applications
- Tank weighing
- Process weighing
- Big-bag equipment
- Filling and dosing
- Offshore Level measurement
- Platform scales
- 料斗秤
- Heavy duty applications
- Belt scales
-
Compression Load Cell FD
-
- 健壮的数码网络tal compression load cell produced in stainless steel and hermetically sealed to IP68 for hygienic weighing installations, installations in tough environments and general process weighing
- Capacity (Emax)
6000, 8000, 10000, 12000, 15000, 20000, 25000, 50000kg
- Accuracy
Industrial 0.10%, Precision 0.05%, High Precision 0.025%
- Overload Tolerance
400% at 6tons, 200% at 50tons capacity
Applications
- Tank weighing
- Process weighing
- Level measurement
- Filling and dosing
- Large Vessels
- Offshore applications
- Heavy duty applications
-
Compression Load Cell GDS100
-
- 健壮的数码网络tal heavy duty compression load cell produced in stainless steel and hermetically sealed to IP68 for installation under large silos, tanks, vessels and heavy duty applications
- Capacity (Emax)
100tons
- Accuracy
Industrial 0.25%
- Overload Tolerance
Up to 300% of rated capacity
Applications
- Silo weighing
- Process weighing
- Heavy duty applications
- Level measurement
- Offshore applications
-
Compression Load Cell GDS500
-
- 健壮的数码网络tal heavy duty compression load cell produced in stainless steel and hermetically sealed to IP68 for installation under large silos, tanks, vessels and heavy duty applications
- Capacity (Emax)
200, 300, 400, 500tons
- Accuracy
Industrial 0.25%
- Overload Tolerance
Up to 300% of rated capacity
Applications
- Silo weighing
- Process weighing
- Heavy duty applications
- Level measurement
- Offshore applications
-
Web Tension Load Cell TL 101A
-
- The robust digital TL 101A and TL 101A-ST load cells are designed primarily for measuring web tension. The load cell type TL 101A-ST offers extra safety in applications with heavy rollers and increased temperature compensation. The TL 101A load cell has same dimensions as the ABB PFTL 101A
- Capacity (Emax)
500N, 1, 2, 5kN
- Accuracy
Industrial 0.25%, Precision 0.10%
- Overload Tolerance
Up to 1000% of rated capacity
Applications
- Web tension control
- Tension measurement
- Offshore/Marine applications
- Force measurement
-
Web Tension Load Cell TL 101B
-
- The robust digital TL 101B load cell is a heavy duty version designed primarily for measuring web tension. The TL 101B load cell has same dimensions as the ABB PFTL 101B load cell
- Capacity (Emax)
2, 5, 10, 20kN
- Accuracy
Industrial 0.25%, Precision 0.10%
- Overload Tolerance
Up to 1000% of rated capacity
Applications
- Web tension control
- Tension measurement
- Offshore/Marine applications
- Force measurement
-
Customized Digital Load Cells
-
- Eilersen designs customized robust digital load cells for industrial applications like on-board truck weighing, crane scales, offshore installations, web tension measurement and heavy duty applications. Eilersen also develops and produces robust load cells for specific customer applications. OIML and ATEX certified versions are available
- Capacity (Emax)
Bending beam load cells up to 50tons. Compression load cells up to 500tons. Tension load cells up to 100tons. Web tension measurement up to 100kN
- Accuracy
Depends on load cell and application
- Overload Tolerance
Up to 1000% of rated capacity
Applications
- Dynamic weighing
- Process weighing
- Tanks and vessels
- Vibration sorters
- Filling and dosing
- Platform scales
- Packaging machines
- 料斗秤
- Belt scales
- Conveyor scales
- Big-bag equipment
- On-board weighing
- Web tension control
- Tension measurement
- Offshore/Marine applications
- Force measurement
- Mobile weighing
- Heavy duty applications
-
BBLA ATEX梁负载细胞
-
- 健壮的数码网络tal ATEX certified beam load cell for dynamic weighing, process weighing and general industrial weighing. Application examples are belt scales, platform scales, small vessels, filling machines, process equipment etc. in ATEX (Ex) environment. The load cell can also be used in non-ATEX (ex) rated area
- Capacity (Emax)
2, 5, 10, 20, 30, 50,100, 150, 250, 500, 1000kg
- Accuracy
Industrial 0.10%, Precision 0.05%, High Precision 0.025%
- Overload Tolerance
500% at 5kg, 200% at 1000kg capacity
Applications
- Dynamic weighing
- Process weighing
- Tanks and vessels
- Vibration sorters
- Filling and dosing
- Platform scales
- Packaging machines
- 料斗秤
- Belt scales
- Conveyor scales
- Big-bag equipment
- On-board weighing
-
ATEX Beam Load Cell BBMA70
-
- 健壮的数码网络tal heavy duty ATEX certified beam load cell produced in stainless steel and hermetically sealed to IP68 for process weighing, industrial weighing and tough applications such as on-board truck weighing, offshore, steel industry etc. The BBMA70 load cell can be used in ATEX (Ex) and non-ATEX applications
- Capacity (Emax)
1000, 2000, 3000kg
- Accuracy
Industrial 0.10%, Precision 0.05%, High Precision 0.025%
- Overload Tolerance
Up to 500% of rated capacity
Applications
- Dynamic weighing
- Process weighing
- Mobile weighing
- Vibration feeders
- Big-bag equipment
- 料斗秤
- Conveyor scales
- Heavy duty platform scales
- Heavy duty applications
- Offshore applications
-
ATEX Beam Load Cell BBMA80
-
- 健壮的数码网络tal heavy duty ATEX certified beam load cell produced in stainless steel and hermetically sealed to IP68 for process weighing, industrial weighing and tough applications such as on-board truck weighing, offshore, steel industry etc. The BBMA80 load cell can be used in ATEX (Ex) and non-ATEX applications
- Capacity (Emax)
5000, 6000, 7000kg
- Accuracy
Industrial 0.10%, Precision 0.05%, High Precision 0.025%
- Overload Tolerance
Up to 500% of rated capacity
Applications
- Dynamic weighing
- Process weighing
- Mobile weighing
- Vibration feeders
- Big-bag equipment
- 料斗秤
- Conveyor scales
- Heavy duty platform scales
- Heavy duty applications
- Offshore applications
-
ATEX Compression Load Cell DLA
-
- 健壮的数码网络tal ATEX certified compression load cell produced in stainless steel and hermetically sealed to IP68 for hygienic weighing installations, installations in tough environments and general process weighing. The DLA compression load cell can be used in ATEX (Ex) and non-ATEX applications
- Capacity (Emax)
50, 100, 150, 250, 500, 1000, 1500, 2000, 3000, 4000, 5000kg
- Accuracy
Industrial 0.10%, Precision 0.05%, High Precision 0.025%
- Overload Tolerance
Up to 500% of rated capacity
Applications
- Tank weighing
- Process weighing
- Big-bag equipment
- Filling and dosing
- Offshore Level measurement
- Platform scales
- 料斗秤
- Heavy duty applications
- Belt scales
-
ATEX Compression Load Cell DMA
-
- 健壮的数码网络tal ATEX certified compression load cell produced in stainless steel and hermetically sealed to IP68 for hygienic weighing installations, installations in tough environments and general process weighing. The DMA compression load cell can be used in ATEX (Ex) and non-ATEX applications
- Capacity (Emax)
6000, 8000, 10000, 15000, 25000, 50000kg
- Accuracy
Industrial 0.10%, Precision 0.05%
- Overload Tolerance
Up to 400% of rated capacity
Applications
- Tank weighing
- Process weighing
- Level measurement
- Filling and dosing
- Large Vessels
- Offshore applications
- Heavy duty applications
-
ATEX Compression Load Cell DHA100
-
- 健壮的数码网络tal ATEX certified heavy duty compression load cell produced in stainless steel and hermetically sealed to IP68 for installation under large silos, tanks, vessels and heavy duty applications. The DHA100 load cell can be used in ATEX (Ex) and non-ATEX applications
- Capacity (Emax)
100tons
- Accuracy
Industrial 0.25%
- Overload Tolerance
Up to 300% of rated capacity
Applications
- Silo weighing
- Process weighing
- Heavy duty applications
- Level measurement
- Offshore applications
-
ATEX Compression Load Cell DHA500
-
- 健壮的数码网络tal ATEX certified heavy duty compression load cell produced in stainless steel and hermetically sealed to IP68 for installation under large silos, tanks, vessels and heavy duty applications. The DHA500 load cell can be used in ATEX (Ex) and non-ATEX applications
- Capacity (Emax)
200, 300, 400, 500tons
- Accuracy
Industrial 0.25%
- Overload Tolerance
Up to 300% of rated capacity
Applications
- Silo weighing
- Process weighing
- Heavy duty applications
- Level measurement
- Offshore applications
Weighing Modules
Flexible and easy to use
The broad range of configurable load cell interface modules with direct fieldbus connectivity or analog output feature a small form factor, plug-and-play installation, integrated diagnostics and ATEX versions
-
ATEX PROFINET Interface Module 4X70A
-
- ATEX and IECEx certified (zone 1, 2, 21, 22) PROFINET interface module for directly interfacing up to four digital ATEX / IECEx load cells via PROFINET. The interface module type 4X70A can also be used in non-ATEX installations
Interface
Special Features
- Made in Denmark
- PROFINET output
- Weighing module for up to 4 digital load cells
- For ATEX / IECEx and non-ATEX applications
- Plug-and-play installation with Eilersen digital load cells
- Advanced digital filters (configurable)
- A ”Digital Junction Box” that can be mounted near the load cells or in a central panel
- Small Form Factor
- Setup via dip switches
- For ATEX / IECEx when supplied by power supply type 4051A
- The power supply 4051A and module type 4X70A must be installed outside the hazardous zone
- Application software can be made by request
-
ATEX EtherCAT Interface Module 4X60A
-
- ATEX and IECEx certified (zone 1, 2, 21, 22) EtherCAT interface module for directly interfacing up to four digital ATEX / IECEx load cells via EtherCAT. The interface module type 4X60A can also be used in non-ATEX installations
Interface
Special Features
- Made in Denmark
- EtherCAT接口
- Weighing module for up to 4 digital load cells
- For ATEX / IECEx and non-ATEX applications
- Plug-and-play installation with Eilersen digital load cells
- Advanced digital filters (configurable)
- A ”Digital Junction Box” that can be mounted near the load cells or in a central panel
- Small Form Factor
- Setup via dip switches
- For ATEX / IECEx installation when supplied by power supply type 4051A
- The power supply 4051A and module type 4X60A must be installed outside the hazardous zone
- Application software can be made by request
-
ATEX Profibus DP Interface Module 4X35A
-
- ATEX and IECEx certified (zone 1, 2, 21, 22) Profibus DP interface module for directly interfacing up to four digital ATEX / IECEx load cells via Profibus DP. The interface module type 4X35A can also be used in non-ATEX installations
Interface
Special Features
- Made in Denmark
- Profibus DP output
- Weighing module for up to 4 digital load cells
- For ATEX / IECEx and non-ATEX applications
- Plug-and-play installation with Eilersen digital load cells
- Advanced digital filters (configurable)
- A ”Digital Junction Box” that can be mounted near the load cells or in a central panel
- Small Form Factor
- Setup via dip switches
- For ATEX / IECEx when supplied by power supply type 4051A
- The power supply 4051A and module type 4X35A must be installed outside the hazardous zone
- Application software can be made by request
-
ATEX EtherNet/IP Interface Module 4X50A
-
- ATEX and IECEx certified (zone 1, 2, 21, 22) EtherNet/IP interface module for directly interfacing up to four digital ATEX / IECEx load cells. The interface module type 4X50A can also be used in non-ATEX installations.
Interface
Special Features
- Made in Denmark
- EtherNet/IP fieldbus interface
- Weighing module for up to 4 digital load cells
- For ATEX / IECEx and non-ATEX applications
- Plug-and-play installation with Eilersen digital load cells
- Advanced digital filters (configurable)
- A ”Digital Junction Box” that can be mounted near the load cells or in a central panel
- Small Form Factor
- Setup via dip switches
- For ATEX / IECEx when supplied by power supply type 4051A
- The power supply 4051A and module type 4X50A must be installed outside the hazardous zone
- Application software can be made by request
-
ATEX Modbus TCP/IP Interface Module 4x50A
-
- ATEX and IECEx certified (zone 1, 2, 21, 22) Modbus TCP/IP interface module for directly interfacing up to four digital ATEX / IECEx load cells. The interface module type 4X50A can also be used in non-ATEX installations
Interface
Special Features
- Made in Denmark
- Modbus TCP/IP fieldbus interface
- Weighing module for up to 4 digital load cells
- For ATEX / IECEx and non-ATEX applications
- Plug-and-play installation with Eilersen digital load cells
- Advanced digital filters (configurable)
- A ”Digital Junction Box” that can be mounted near the load cells or in a central panel
- Small Form Factor
- Setup via dip switches
- For ATEX / IECEx when supplied by power supply type 4051A
- The power supply 4051A and module type 4X50A must be installed outside the hazardous zone
- Application software can be made by request
-
Analog Output Module 4X79A
-
- Analog output weighing module featuring a LED display, 4-20mA or 0-10Vdc active analog output and digital EtherNet interface. The module also features four I/O for level alarms and remote zeroing. This module can directly connect to up to four digital load cells, and can be used for ATEX / IECEx and non-ATEX installations.
Interface
- Analog output (4-20mA or 0-10Vdc active output) and Ethernet interface
Special Features
- Made in Denmark
- Analog 4-20mA or 0-10Vdc ACTIVE output
- Digital EtherNet interface
- Six character LED display
- 2 + 2数码网络数字输入tal outputs
- Weighing module for up to 4 digital load cells
- Can show the weight on the connected load cells
- Can show the summed weight for the connected load cells
- Configurable measuring time (20ms -> 4sec)
- 16bit D/A converter
- Setup via dip switches
- For ATEX (Ex) / IECEx when supplied by power supply type 4051A
- The power supply 4051A and module type 4X70A
- must be installed outside the hazardous zone
- Plug-and-play installation with Eilersen digital load cells
- Input for zeroing
- A "Digital Junction Box" that can be mounted
- near the load cells or in a central panel
- Application specific software can be made by request
-
ATEX Serial Interface Module 4X40A
-
- ATEX and IECEx certified (zone 1, 2, 21, 22) RS485 interface module for directly interfacing up to four digital ATEX / IECEx load cells via RS485. The interface module type 4X40A can also be used in non-ATEX installations
Interface
Special Features
- Made in Denmark
- RS485 output
- Weighing module for up to 4 digital load cells
- For ATEX / IECEx and non-ATEX applications
- Plug-and-play installation with Eilersen digital load cells
- Advanced digital filters (configurable)
- Small Form Factor
- A ”Digital Junction Box” that can be mounted near the load cells or in a central panel
- Setup via dip switches
- For ATEX / IECEx when supplied by power supply type 4051A
- The power supply 4051A and module type 4X40A must be installed outside the hazardous zone
- Application software can be made by request
-
ATEX DeviceNet Interface Module 4X37A
-
- ATEX and IECEx certified (zone 1, 2, 21, 22) DeviceNet interface module for directly interfacing up to four digital ATEX / IECEx load cells via DeviceNet. The interface module type 4X37A can also be used in non-ATEX installations
Interface
Special Features
- Made in Denmark
- DeviceNet output
- Weighing module for up to 4 digital load cells
- For ATEX / IECEx and non-ATEX applications
- Plug-and-play installation with Eilersen digital load cells
- Advanced digital filters (configurable)
- A ”Digital Junction Box” that can be mounted near the load cells or in a central panel
- Small Form Factor
- Setup via dip switches
- For ATEX / IECEx when supplied by power supply type 4051A
- The power supply 4051A and module type 4X37A must be installed outside the hazardous zone
- Application software can be made by request
-
ATEX / IECEx Certified Power Supply 4051A
-
- ATEX and IECEx certified (zone 1, 2, 21, 22) power supply type 4051A used for supplying 4XXXA interface modules when used in ATEX / IECEx rated applications. The 4051A power supply and 4XXXA interface module must be installed in safe area i.e. outside the ATEX zone
Interface
- ATEX / IECEx power supply
Special Features
- Made in Denmark
- ATEX and IECEx certified power supply for Eilersen digital weighing modules type 4XXXA
- For hazardous applications in ATEX / IECEx Zone 1, 2, 21 or 22
- 电源类型和模块类型4 xxa 4051 must be installed outside the hazardous zone
- Small Form Factor
- Input: Standard power supply 24 Vdc, 1A
- Output: Safe 24 Vdc, 0.2A output
-
Serial Interface Module 4140OEM
-
- RS485 interface module for interfacing digital load cells to PLCs, PCs etc. The module is developed for OEM use and can be equipped with customized protocols
Interface
Special Features
- Made in Denmark
- RS485 interface
- Weighing module with connector for 1 digital load cell
- Plug-and-play installation with pre-calibrated digital load cell
- Advanced digital filters (configurable)
- Setup via dip switches
- Application software can be made by request
- Input: Coaxial connector for 1 digital load cell and power supply 24Vdc, 1A
- Interface: RS485 (Customized protocols available)
-
OEM Weighing Board 5008OEM
-
- OEM weighing board for interfacing up to 8 digital load cells to PLCs, PCs etc. This weighing board is developed for OEM use and can be equipped with customized protocols
Interface
- RS485, EtherNet, EtherCAT (pending)
Special Features
- Made in Denmark
- Interfaces: RS485, EtherNet and EtherCAT (pending)
- Weighing board for up to 8 digital load cells
- Plug-and-play installation with pre-calibrated digital load cells
- Advanced digital filters (configurable)
- Setup via dip switches
- Application software can be made by request
- Connectors for up to 8 digital load cells and power supply 24Vdc, min. 2A
-
Analog Output Module 4X29
-
- Analog output weighing module featuring a small LED display, 4-20mA or 0-10Vdc active output and RS485 interface. The module also features four I/O for level alarms and remote zeroing. This module can directly connect to up to four digital ATEX load cells for use in non-ATEX installations
Interface
- Analog output (4-20mA or 0-10Vdc active output) and RS485 interface
Special Features
- Made in Denmark
- Analog 4-20mA or 0-10Vdc ACTIVE output
- Digital RS485 serial communication
- Six character LED display
- 2 + 2数码网络数字输入tal outputs
- Weighing module for up to 4 digital load cells
- Shows the weight on each of the connected load cells
- Shows the summed weight for the connected load cells
- Configurable measuring time (40ms -> 4sec)
- 16bit D/A converter
- 3 different FIR filters selectable by dip switches
- Plug-and-play installation with Eilersen digital load cells
- Input for zeroing
- A "Digital Junction Box" that can be mounted near the load cells or in a central panel
- Application specific software can be made by request
-
Load Cell Module MCE2010
-
- The load cell module type MCE2010 interfaces digital non-ATEX load cells to Eilersen weighing terminals and interface modules for communication to PLCs, PCs etc . The module MCE2010 replaces module MCE9610.
Interface
- Eilersen RS485 load cell bus
Special Features
- Made in Denmark
- The Digital Load Cell Module MCE2010 interfaces the digital load cells to the Eilersen instrumentation, communication modules and other equipment with fast RS485 communication ports through the Eilersen load cell bus.
- The Eilersen proprietary RS485 protocol is available for OEM use.
- The connection between the digital load cell and the load cell module is a standard BNC connector.
- The load cell module is powered through the digital load cell bus ribbon cable which is terminated in the MCE9601 terminal module.
- Up to 16 load cells modules or other modules can be connected to the Eilersen digital RS485 load cell bus.
-
Analog Output Module MCE2029
-
- Analog output weighing module featuring a small LED display, 4-20mA or 0-10Vdc active output and RS485 interface. The module also features four I/O for level alarms and remote zeroing. This module can be used for up to eight digital non-ATEX load cells. The module type MCE2029 can also be used in ATEX applications when connected to an ATEX 4X40A interface module
Interface
- Analog output (4-20mA or 0-10Vdc active output) and RS485 interface
Special Features
- Made in Denmark
- Analog 4-20mA or 0-10Vdc ACTIVE output
- Digital RS485 serial communication
- Six character LED display
- 2 + 2数码网络数字输入tal outputs
- Can be used for up to 8 digital load cells
- Shows the weight on each of the load cells
- Shows the summed weight for all the load cells
- Configurable measuring time (40 ms -> 4 seconds)
- 16bit D/A converter
- 3 different FIR filters selectable by dip switches
- Plug-and-play installation with pre-calibrated digital load cells
- Input for zeroing
- Setup via keys and dip switches
- Application software can be made by request
-
Profibus DP Interface Module MCE2035
-
- Profibus DP interface module for interfacing up to eight digital non-ATEX load cells via Profibus DP
Interface
Special Features
- Made in Denmark
- Profibus DP communication module for interfacing Eilersen digital load cells to a Profibus DP Master device (PLC).
- The module can be used for up to 8 digital load cells and transmits the weight and status for each individual load cell.
- 该模块啊ffers plug-and-play installation with Eilersen pre-calibrated digital load cells and the module is supplied with a GSD file for easy installation.
- Application software can be made by request.
-
PROFINET Interface Module 2070
-
- PROFINET interface module for interfacing up to eight digital non-ATEX load cells via PROFINET fieldbus interface
Interface
Special Features
- Made in Denmark
- PROFINET communication module for interfacing Eilersen digital load cells to PCs, PLCs and other equipment.
- The module can be used for up to 8 digital load cells and transmits the weight and status for each individual load cell.
- 该模块啊ffers plug-and-play installation with Eilersen pre-calibrated digital load cells.
- The module is supplied with an GSD XML file for easy installation.
- Application software can be made by request.
-
EtherNet/IP Interface Module 2050
-
- EtherNet/IP interface module for interfacing up to eight digital non-ATEX load cells.
Interface
Special Features
- Made in Denmark
- EtherNet/IP communication module for interfacing Eilersen digital load cells to PCs, PLCs and other equipment.
- The module can be used for up to 8 digital load cells and transmits the weight and status for each individual load cell.
- 该模块啊ffers plug-and-play installation with Eilersen pre-calibrated digital load cells.
- The module is supplied with an EDS file for easy installation.
- Application software can be made by request.
-
Serial Interface Module MCE2040
-
- Serial interface module for interfacing up to eight digital non-ATEX load cells via RS232, RS485 or RS422.
Interface
Special Features
- Made in Denmark
- Serial RS232/RS485/RS422 communication module for interfacing Eilersen digital load cells to PCs, PLCs and other equipment.
- The module can be used for up to 8 digital load cells and transmits the weight and status for each individual load cell.
- 该模块啊ffers plug-and-play installation with Eilersen pre-calibrated digital load cells.
- Application software can be made by request.
-
Serial Interface Module MCE2040
-
- Serial interface module for interfacing up to eight digital non-ATEX load cells via Modbus ASCII/RTU protocol
Interface
Special Features
- Made in Denmark
- Serial communication module with Modbus ASCII/RTU protocol for interfacing Eilersen digital load cells to PCs, PLCs and other equipment.
- The module can be used for up to 8 digital load cells and transmits the weight and status for each individual load cell.
- 该模块啊ffers plug-and-play installation with Eilersen pre-calibrated digital load cells.
- Application software can be made by request.
-
DeviceNet Interface Module MCE9637
-
- ODVA approved DeviceNet interface module for interfacing up to eight digital non-ATEX load cells via DeviceNet
Interface
Special Features
- Made in Denmark
- DeviceNet communication module for interfacing Eilersen digital load cells to a DeviceNet Master device (PLC).
- The module can be used for up to 8 digital load cells and transmits the weight and status for each individual load cell.
- 该模块啊ffers plug-and-play installation with Eilersen pre-calibrated digital load cells and the module is supplied with an EDS file for easy installation.
- Application software can be made by request.
-
Terminal Module MCE9601
-
- Connection between Eilersen RS485 load cell bus at one side and 24Vdc Power Supply and Eilersen digital weighing terminals on the other side
Interface
- 24Vdc supply and Eilersen RS485 load cell bus
Special Features
- Made in Denmark
- Connection between Eilersen Electric Digital Load Cell bus at one side and 24 VDC Power Supply and Eilersen digital weighing terminals on the other side
Weighing Indicators
Optimal weighing performance
The Eilersen OIML certified digital weighing controllers are equipped with software for standard weighing applications. OEM versions with customized firmware are developed by in-house team of engineers.
-
Digital LCD Weighing Indicator 5024G
-
- Fully digital OIML certified weighing indicator type 5024G with alibi memory and software for standard weighing applications. Digital signal processor for displaying and processing the data from the Eilersen range of digital load cells. Durable capacitive touch keyboard
Options
- Panel mounting
- Mounted in stainless steel housing
- OEM version
- Customized application software
Special Features
- Made in Denmark
- 5,2" LCD for displaying data and parameters
- Touch keyboard with 7 keys for zeroing, tare function, entering parameters, set-points, etc.
- Alibi memory
- Ethernet, RS485, and 4-20mA ACTIVE output for communication with PCs, PLCs, central data processing systems, printers, bar code readers, etc.
- 4 configurable 24Vdc I/O
- Function keys for Start/Stop and Print for handling various processes
- Durable front with no keyboard to be worn out
- Optional Profibus DP, DeviceNet, EtherCAT, and ProfiNet (pending) interfaces
-
Digital LCD Weighing Indicator MCE9625G
-
- 非常福莱希ble and fully digital OIML certified weighing indicator type MCE9625G with alphanumeric keyboard and a wide range of software for all standard weighing applications. The Eilersen weighing indicators feature a digital signal processor for displaying and processing the data from the Eilersen range of digital load cells. The MCE9625G is a weighing indicator with internal recipe handling to allow automation of batching and manual additions. The weighing indicator features various batch functions for direct control of batch components
Options
- Panel mounting
- Mounted in stainless steel housing
- OEM version
- Customized application software
Special Features
- Made in Denmark
- 2 x RS485, 1 x RS485/422, 2 x RS232 serial interfaces
- 3 x 24伏直流电输入和3 x 24伏直流电输出
- 256 x 64pixel (40 x 8 characters) graphic LCD display with LED backlight for displaying data and parameters plus specific functions for the ten function keys, help screens etc.
- Alphanumeric keyboard with keys for zeroing, tare function, gross/net and entering parameters, set-points, etc.
- Function keys for Start/Stop and Print for handling various processes
- Ten function keys for entering and controlling parameters
- Connection to Fieldbus and supervisory (ERP) systems
- Optional I/O extension: 4 x 24Vdc digital inputs and 8 x 24Vdc, 0.1A digital outputs for connection to photo cells, relays, actuators etc.
- Optional Profibus DP, DeviceNet, EtherCAT, and ProfiNet (pending) interfaces
-
Digital LED Weighing Indicator MCE9625L
-
- Flexible and fully digital OIML certified weighing indicator type MCE9625L with numeric keyboard and a wide range of software for all standard weighing applications. The MCE9625L weighing indicator feature a digital signal processor and advanced features for displaying and controlling process values and communication with various types of equipment
Options
- Panel mounting
- Mounted in stainless steel housing
- OEM version
- Customized application software
Scales
Robust and accurate scales with flexible interfaces
Eilersen offers a unique range of industrial, ATEX and hygienic scales in stainless steel for the industry. The scales are supplied with local indication and/or direct connectivity to PC, PLCs and SCADA systems.
-
ATEX Scales
-
- ATEX scales based on Eilersen robust IP68 load cells for installation in ATEX rated area (zone 1, 2, 21, and 22) and typically used in food, pharma, chemical and offshore applications where reliability is a must.
Capacity (Emax)
Options
- Specific dimensions, range and materials
- Local indicator and/or direct interface to PC, PLC or SCADA systems
Overload Tolerance
Special Features
- Made in Denmark
- Installation in ATEX zone 1, 2, 21, and 22
- Dimensions, range and materials (e.g. AISI304 or 316, epoxy coating etc.) according to customer specifications
- Robust capacitive technology
- Patented high reliability capacitive sensor (IP68)
- 嗨gh tolerance of up to 1000% overload
- 嗨gh accuracy and high resolution
- Digital filters for reducing the influence from vibrations
- Cable length up to 100meters
- Scale calibration is independent of cable length
- A range of software modules for standard weighing, special purposes, and customer specific applications
- The status of each load cell in the scale can be monitored allowing for easy maintenance
- Local indicator and/or direct 4-20mA, 0-10Vdc, RS485, Modbus ASCII/RTU, DeviceNet, EtherNet IP, Profibus DP, EtherCAT, ProfiNet (pending) interface
-
Bench Scales
-
- Eilersen bench scales are used in tough environments with overloads, vibrations, high humidity and corrosion where high accuracies are required. The bench scales are maintenance-free and fulfil the protection degree IP68. Eilersen bench scales are also available with automatic compensation for seaway
Capacity (Emax)
Options
- Specific dimensions, range and materials
- Local indicator and/or direct interface to PC, PLC or SCADA systems
- Certified versions for legal for trade
- Compensation for seaway
Overload Tolerance
Special Features
- Made in Denmark
- Accuracy Dimensions, range and materials (e.g. AISI304 or 316, epoxy coating etc.) according to customer specifications
- Robust capacitive technology
- Patented high reliability capacitive sensor (IP68)
- 嗨gh tolerance of up to 1000% overload
- 嗨gh accuracy and high resolution
- Digital filters for reducing the influence from vibrations
- Cable length up to 100meters
- Scale calibration is independent of cable length
- A range of software modules for standard weighing, special purposes, and customer specific applications
- The status of each load cell in the scale can be monitored allowing for easy maintenance
- Local indicator and/or direct 4-20mA, 0-10Vdc, RS485, Modbus ASCII/RTU, DeviceNet, EtherNet IP, Profibus DP, EtherCAT, ProfiNet (pending) interface
- Eilersen bench scales are also available with automatic compensation for seaway
-
Floor Scales
-
- Eilersen reliable floor and pit scales are used in wet and tough environments with overloads, vibrations, high humidity and corrosion and where high accuracies are required. The scales are maintenance-free and fulfil the protection degree IP68
Capacity (Emax)
Options
- Specific dimensions, range and materials
- Local indicator and/or direct interface to PC, PLC or SCADA systems
- Certified versions for legal for trade
Overload Tolerance
Special Features
- Made in Denmark
- Dimensions, range and materials (e.g.
- AISI304 or 316, epoxy coating etc.) according to customer specifications
- Robust capacitive technology
- Patented high reliability capacitive sensor (IP68) High tolerance of up to 1000% overload
- 嗨gh accuracy and high resolution Digital filters for reducing the influence from vibrations
- Cable length up to 100meters
- Scale calibration is independent of cable length
- A range of software modules for standard weighing, special purposes, and customer specific applications
- The status of each load cell in the scale can be monitored allowing for easy maintenance
- Local indicator and/or direct 4-20mA, 0-10Vdc, RS485, Modbus ASCII/RTU, DeviceNet, EtherNet IP, Profibus DP, EtherCAT, ProfiNet (pending) interface
-
Hygienic Scales
-
- Eilersen has developed a range of robust floor and pit scales featuring a hinged gas lift load plate for easy washdown in hygienic applications. Scales integrated in the production process have to meet the requirements to hygiene while being so robust that a forklift can drive into or over the scale without damaging the load cells. Furthermore the scale must to be very safe and easy to clean. The new range of hygienic and robust IP68 rated scales from Eilersen fulfills these requirements
Capacity (Emax)
Options
- Specific dimensions, range and materials
- Local indicator and/or direct interface to PC, PLC or SCADA systems
- Certified versions for legal for trade
Overload Tolerance
Special Features
- Made in Denmark
- 嗨nged gas lift load plate for or easy washdown in hygienic applications
- Dimensions, range and materials (e.g. AISI304 or 316, epoxy coating etc.) according to customer specifications,
- Robust capacitive technology
- Patented high reliability capacitive sensor (IP68)
- 嗨gh tolerance of up to 1000% overload
- 嗨gh accuracy and high resolution
- Digital filters for reducing the influence from vibrations,
- Cable length up to 100meters
- Scale calibration is independent of cable length
- A range of software modules for standard weighing, special purposes, and customer specific applications
- The status of each load cell in the scale can be monitored allowing for easy maintenance,
- Local indicator and/or direct 4-20mA, 0-10Vdc, RS485, Modbus ASCII/RTU, DeviceNet, EtherNet IP, Profibus DP, EtherCAT, ProfiNet (pending) interface
-
Pallet U Scales
-
- Eilersen robust and reliable pallet scales are used in wet and tough industrial environments with overloads, vibrations, high humidity and corrosion. The pallet scales are maintenance-free and fulfil the protection degree IP68
Capacity (Emax)
Options
- Specific dimensions, range and materials
- Local indicator and/or direct interface to PC, PLC or SCADA systems
- Certified versions for legal for trade
Overload Tolerance
Special Features
- Made in Denmark
- Dimensions, range and materials (e.g. AISI304 or 316, epoxy coating etc.) according to customer specifications
- Robust capacitive technology
- Patented high reliability capacitive sensor (IP68)
- 嗨gh tolerance of up to 1000% overload
- 嗨gh accuracy and high resolution
- Digital filters for reducing the influence from vibrations
- Cable length up to 100meters
- Scale calibration is independent of cable length
- A range of software modules for standard weighing, special purposes, and customer specific applications
- The status of each load cell in the scale can be monitored allowing for easy maintenance
- Local indicator and/or direct 4-20mA, 0-10Vdc, RS485, Modbus ASCII/RTU, DeviceNet, EtherNet IP, Profibus DP, EtherCAT, ProfiNet (pending) interface
-
Platform Scales
-
- Eilersen robust low profile platform scales are used in wet and tough environments with overloads, vibrations, high humidity and corrosion where high accuracies are required. The platform scales are maintenance-free and fulfil the protection degree IP68
Capacity (Emax)
Options
- Specific dimensions, range and materials
- Local indicator and/or direct interface to PC, PLC or SCADA systems
- Certified versions for legal for trade
Overload Tolerance
Special Features
- Made in Denmark
- Dimensions, range and materials (e.g. AISI304 or 316, epoxy coating etc.) according to customer specifications
- Robust capacitive technology
- Patented high reliability capacitive sensor (IP68)
- 嗨gh tolerance of up to 1000% overload
- 嗨gh accuracy and high resolution
- Digital filters for reducing the influence from vibrations
- Cable length up to 100meters
- Scale calibration is independent of cable length
- A range of software modules for standard weighing, special purposes, and customer specific applications
- The status of each load cell in the scale can be monitored allowing for easy maintenance
- Local indicator and/or direct 4-20mA, 0-10Vdc, RS485, Modbus ASCII/RTU, DeviceNet, EtherNet IP, Profibus DP, EtherCAT, ProfiNet (pending) interface
- Can be supplied with ramps or for installation in a pit
- Ultra low profile version available
-
Customized Scales
-
- Customized scales can be supplied in any variation according to customer specifications. All scales are based on Eilersen digital IP68 load cells which tolerate up to 1000% overload with no overload and sideload protection devices - ideal for very tough environments
Capacity (Emax)
Options
- Specific dimensions, range and materials
- Local indicator and/or direct interface to PC, PLC or SCADA systems
- Certified versions for legal for trade
Overload Tolerance
Special Features
- Made in Denmark
- Dimensions, range and materials (e.g. AISI304 or 316, epoxy coating etc.) according to customer specifications
- Robust capacitive technology
- Patented high reliability capacitive sensor (IP68)
- 嗨gh tolerance of up to 1000% overload
- 嗨gh accuracy and high resolution
- Digital filters for reducing the influence from vibrations
- Cable length up to 100meters
- Scale calibration is independent of cable length
- A range of software modules for standard weighing, special purposes, and customer specific applications
- The status of each load cell in the scale can be monitored allowing for easy maintenance
- Local indicator and/or direct 4-20mA, 0-10Vdc, RS485, Modbus ASCII/RTU, DeviceNet, EtherNet IP, Profibus DP, EtherCAT, ProfiNet (pending) interface
- Eilersen bench scales are also available with automatic compensation for seaway
WEIGHING APPLICATIONS
Based on capacitive technology
Customers worldwide are taking advantage of the Eilersen range of digital load cells and instrumentation with solutions covering a diverse field of applications. Dedicated solutions are available to OEM customers.
-
PROCESS WEIGHING
-
- Process weighing solutions which are accurate, reliable and easy to install with minimal maintenance requirements. Eilersen load cells feature integrated diagnostics and can be installed without overload protection for a simple and hygienic installation.
Related Industries
- Pharma
- Biotech
- Food
- Chemical
- Petrochemical
- Grain and feed
- Mining and minerals
- Engineering and consulting
Related Products
- Compression load cells
- Beam load cells
- Single point load cells ATEX load cells
- Scales
- Weighing terminals
-
Hygienic Weighing
-
- Hygienic robust weighing solutions for installation in food, pharma and biotech industries with production according to HACCP and cGMP standards.
Related Industries
Related Products
- Compression load cells
- Single point load cells ATEX load cells
- Hygienic scales
- Interface modules Weighing terminals
-
Silo Weighing
-
- Weighing solutions for silos based on digital pre-calibrated load cells offering simple installation, easy commissioning and minimal maintenance. Eilersen solutions are available with local indicators and/or direct connectivity to PLCs, PCs, MES and ERP systems
Related Industries
- Mining and minerals
- Pharma
- Food
- Grain and feed
- Energy
- Chemical
- Petrochemical
Related Products
- Compression load cells
- ATEX load cells
- Heavy duty load cells
- Weighing terminals
-
Dynamic Weighing
-
- Fast and accuracte solutions based on Eilersen digital load cells for dynamic weighing applications. Eilersen is also offering solutions for dynamic checkweighing, catchweighing and belt weighing.
Related Industries
- Logistics
- Food
- Pharma
- Mining and minerals
- Automation
- Machine builders
- Energy
Related Products
- Single point load cells
- Beam load cells
- Weighing terminals
-
On-Board Weighing
-
- Robust on-board weighing solutions for trucks, dumpers and trailers. The load cells from Eilersen offer high reliability, simple mechanical and electrical installation and minimal maintenance.
Related Industries
- Logistics
- Energy
- Petrochemical
Related Products
- Single point load cells
- Beam load cells
- Weighing terminals
-
ATEX Applications
-
- Digital weighing solutions for installation in ATEX zone 1, 2, 21 and 22. Eilersen ATEX load cells tolerate up to 1000% overload and are supplied with up to 100meter cable length.
Related Industries
- Food
- Pharma
- Offshore
- Chemical
- Petrochemical
- Energy
- Mining
Related Products
- ATEX load cells
- ATEX modules
- ATEX scales
-
Offshore Load Cell Solutions
-
- Robust weighing solutions for installation in offshore applications (P-tanks, water mist systems, skids, mud systems etc.). Eilersen weighing solutions are available for installation in ATEX zone 1 2, 21 and 22. Eilersen load cells are optionally supplied with mud resistant and halogen free cables.
Related Industries
Related Products
- ATEX load cells
- ATEX scales
- Heavy duty load cells
- Weighing Indicators
-
Web Tension Measurement
-
- Eilersen offers robust and reliable solutions for web tension measurement. The Eilersen load cells for web tension measurement offer high overload tolerance, small deflection under load and a wide range of both analog and digital field interfaces.
Related Industries
- Pulp and Paper
- Plastic
- Chemical
Related Products
- Load cell type SLCAD
- 自定义负载细胞
-
Heavy Duty Applications
-
- Eilersen load cells are ideal for the most demanding applications by offering both high overload tolerance, simple installation and high accuracy. The load cells and weighing instrumentation have been developed on the basis of more than 40 years experience in heavy duty weighing with installations in more than 85 countries worldwide.
Related Industries
- Mining
- Energy
- Engineering and consulting
- Offshore
- Machine building
Related Products
-
Customized Solutions
-
- The experience, speed and flexibility of the Eilersen team, ensures that customized weighing solutions can be developed in due time for customers with special requirements. The Eilersen team has designed a host of customized load cells through more than 40 years for applications like on-board truck weighing, force measurement, offshore installations, web tension measurement and many other applications. The Eilersen customized load cells can optionally be supplied in OIML and ATEX certified versions.
Related Industries
- Mining
- Energy
- Engineering and consulting
- Offshore
- Machine building
Related Products
